Top Double Sided Pcb Reviews

GeeekPi Electronic Fun Kit,with 3PCS Half Sized Breadboard Cable Resistor LED Potentiometer for Electronic Learning Kit, Compatible with Arduino IDE, UNO R3, MEGA2560, Raspberry Pi Range(Black)

  • This is an entry-level kit that contains DIY solderable PCB breadboards, male and female Pin headers, LED lights, resistor packages, and jumper packages..
  • More than 200 pieces of components, compatible with Arduino IDE, Raspberry Pi and other microcontroller boards..
  • 3PCS Proto Breadboard PCB Board Gold Plated Experimental Breadboard Soldering Board Double-Sided PCB.
Check Stock

Miuzei PCB Board Prototype Kit for Electronic Projects Circuit Solder Double-Side Board with 40 Pin 2.54 mm Male to Female Headers Connector 2P&3P Screw Terminal Block Solder Flux Solder Wire

  • ⭐【6 Different Sizes PCB Boards】Double Sided Prototype PCB Boards--1 × 9*7cm, 2 × 8*6cm, 5 × 8*2cm and 5× 7*5cm, 5 × 7*3cm, 5 × 5*4cm PCB....
  • ⭐【Convenient for Projects】The upgrate 0.8mm....
  • ⭐【Header Connector】6 pcs 40 pin Male Header, 4 pcs 40 pin Pitch Right Angle Male Headers, 6 pcs 40 Pin Female Header.
  • ⭐【Screw Terminal Block】8 Pcs Screw Terminal Block: 6 pcs 5.08-301-2P and 6 pcs 5.08-301-3P.
  • Pitch: 5.08mm, Rated Voltage: 300V, Rated Current:....
  • ⭐【High Quality & Warranty】Durable Glass Fiber-FR4 Material (Thickness 1.6mm) is A Very Solid and Durable Prototype Circuit Board.
Check Stock

American Bass Amp D Class 1 Ohm Stable 4000 Watts Max

Check Stock

YaeCCC 110V Ultrasonic Cleaner Power Driver Board with 2PCS 50W 40K Transducers

  • -The ultrasonic generator can monitor the power system frequency ultrasound power..
  • -According to different requirements of users, real-time adjustment of various parameters: The power, amplitude, and running time..
Check Stock

Patriot Signature 4 GB PC3-10600 (1333 MHz) DDR3 Desktop Memory PSD34G13332

  • Non-ECC Unbuffered 240-Pin 2 Rank Double-sided in-line memory module.
  • PCB height: 1181(mil) and 1.5V Power Requirement.
  • 100% Tested, RoHS Compliant, JEDEC Compliant.
Check Stock

RF Mixer, Low Noise Diode Passive Frequency Transducer Module for Phase Comparator for Demodulator

  • Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
  • The interior is composed of double balanced microwave diodes, come with high reliability.
  • 35dB high isolation between local oscillator and RF input, which is stable and reliable.
  • The product have large heat dissipation area, possess stable operation and long running time.
  • The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
Check Stock

RF Mixer, Passive Frequency Transducer Module RFout=DC?1.0GHz Diode for Demodulator for Phase Comparator

  • The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
  • The interior is composed of double balanced microwave diodes, come with high reliability.
  • The product have large heat dissipation area, possess stable operation and long running time.
  • Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
  • 35dB high isolation between local oscillator and RF input, which is stable and reliable.
Check Stock

Patriot Signature 8GB DIMM DDR3 CL11 PC3-12800 (1600MHz) PSD38G16002

  • 7.8US Refresh Interval (8192 CYCLES/64MS).
Check Stock

RF Mixer, RFin=1.5‑3.8GHz Converter Double Balanced Frequency Transducer Module for Phase Comparator for Demodulator

  • The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
  • Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
  • The product have large heat dissipation area, possess stable operation and long running time.
  • The interior is composed of double balanced microwave diodes, come with high reliability.
  • 35dB high isolation between local oscillator and RF input, which is stable and reliable.
Check Stock

Double Balanced Frequency Transducer Module, RF Mixer Diode RFout=DC‑1.0GHz for Phase Comparator for Demodulator

  • The product have large heat dissipation area, possess stable operation and long running time.
  • The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
  • 35dB high isolation between local oscillator and RF input, which is stable and reliable.
  • Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
  • The interior is composed of double balanced microwave diodes, come with high reliability.
Check Stock

FormulaMod 120mm ARGB High Performance with Low Noise Water Cooling Case Fan CPU Fan Radiator Fan FM-FANYH01

  • High wind pressure and high air volume design for optimal cooling performance in water cooling systems.
  • 11 large-size fan blades rotate smoothly, up to 68.65 CFM air volume.
  • Four-sided double-sided anti-vibration rubber pad, effectively reducing noise during fan operation.
  • The motor PCB integrates 6 luminous 5V full-color lamp beads, which can be adjusted by light and synchronized by external controller..
  • After-sales service: If you purchase our company’s products, the warranty period is half a year, and we provide technical support. If you encounter any problems when using our products, please feel free to contact us..
Check Stock

Soundstream PN5.640D Picasso Nano 640 W 5-Channel Class D Digital Car Audio Amplifier

  • PN5.640D - Soundstream 5-Channel 640W RMS Picasso Nano Series Class D Amplifier.
  • RMS Power Rating: 4 ohms: 60 watts x 4 chan. + 200 watts | 2 ohms: 80 watts x 4 chan. + 350 watts | 4 ohms Bridged: 160 watts x 2 chan. + 350 watts.
Check Stock

Purse Organzier Bag Organizer with Metal Zipper Large Beige

  • ★32 pieces double sided PCB prototype boards well packed in a plastic tray which is very easy to store and take out.
  • ★5 different size boards to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects.
  • ★4 mounting holes at the corners of the board are very convenient for installing them together..
  • ★Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects.
  • ★High quality of durable glass fiber –FR4 material with 1.6mm thickness makes a very solid and sturdy prototype circuit board.
Check Stock