Top Disc Brake Wheel Truing Reviews

Jucoan 2 Pack Buffing Wheel Rake, 14.5\ Metal Serrated Brush with Wooden Handle for Compound Clean Jewelry Dress Polishing Buffs, Hairy Brush Buff Kit

  • Package includes 2 heavy-gauge steel rakes for buffing wheel cleaning..
  • Buffing wheel rake is a handy tool for removing dried compound, fluffing buffing wheels, and truing their faces. A must have for your buffing arbor..
  • Material: The buffing wheel rake is made with metal serrated brake, sturdy and durable. With a wooden handle for comfortable holding..
  • Size: The full length including handle is 14.5”.
  • metal serrated area is 4.5" long x 2-1/4" wide..
  • Usage: Buff rake is used for cleaning buffing wheels, removing built up residue compound from polishing wheel surface, getting it performance better and more endurable, ideal for jewelry polishing buff, bench top grinders or others..
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

labtechsales Dodge Size 3 Gear Coupling Taper-Lock HUB 008504

  • SPECIFICATION 1 - Rated Voltage(V): 36V Rated power(W): 250W Available Wheel Size: 20 - 28 Rated Speed(Km/h): 300RPM Rated Efficiency(%): 003e=84 Reduction Ratio: 01:04.5.
  • SPECIFICATION 2 - Size: 6.3 x 5.6 x 5.6 in Weight: 6.6 lbs Open Size: 5.2 in Drive and Freewheel: 6-11s Cable Location: Shaft center right Hall Sensor: Yes Integrate Speed sensor: Yes Surface: Matte black Brake Type: V brake/Disc V brake/Disc brake Salt fog test (h): 24/96 Noise (db): ＜55db Waterproof Grade: IP54.
  • WIDE RANGE OF APPLICATIONS - Electric Bicycles, Ebike, E-Scooter, Skatebord, Folding Bike, WheelChair, Light EV Quad Car, DIY And More..
  • CUSTOMER SERVICE - if you have any question. you can contact us at any time, we will reoly you as sson as possible..
Check Stock

Disc Brake Rotor Cover, 2Pcs/Set Universal Auto Car Wheel Aluminium Disc Drum Rotor Trim Decorative Covers Retrofit Brake Racing Cover 26cm(Red)

  • ▶ 【Professional accessories】26cm diameter, the disc brake rotor cover fit for vehicles with 14 inch or larger wheels, 4 or 5 bolt patterns.
  • ▶ 【Functional Utility】 Circulate air around the brake to help dissipate heat. It can reduce the accumulation of brake dust on the wheels. Give the vehicle the appearance of a cross-drilled rotor for racing..
  • ▶【High Quality】The Disc Brake Rotor Cover is made of aluminum alloy and chrome-plated surface, durable. It is also non-polluting during the process and is very environmentally friendly..
  • ▶【Easy To Install】 Lift and firmly support the vehicle. Remove the wheels from the vehicle. Install the brake disc cover onto the vehicle bolts to ensure correct installation. Clean the disc cover and wheel hub with brake cleaner, alcohol or similar cleaner..
  • ▶【Brand New】100% brand new high quality disc brake cleaner cover, strictly full tested to ensure the best quality before shipment, safe to use..
Check Stock

Vbest life 20in Mountain Bike Disc Brake Wheel Set Bicycle Hub Integrated Cassette Wheel Disc Brake Rotor, Suitable for Road Bikes Mountain Bikes

  • [High Performance]Bicycle disc brakes have excellent performance, stylish colors and excellent workmanship make the bicycle wheels more dynamic when riding, and the bearing rotation is flexible, which can bring a light and stable riding experience..
  • [Easy Installation]The bicycle disc brake wheel is easy to install, and the quick release wheel makes it easier to install. The front hub is 100 mm and the rear hub is 135 mm..
  • [Compatibility]Bicycle disc brake wheels are suitable for bicycles, mountain bikes are suitable for high-end 20-inch bicycles, mountainous areas, etc..
  • [Professional Made]Bicycle wheels with fixed gears and quick release forks. Professional manufacturing, stable performance and high reliability..
  • [Ideal Replacement]High-quality repair or upgrade parts for bicycle disc brake wheels. Only to provide you with more convenient riding experience.
Check Stock

Lubrimatic 11335 1 Pack Moly EP Grease, 14 oz. Cartridge

  • Contains extreme pressure (EP) additives to reduce scuffing, scoring and seizure with high loads.
  • Addition of molybdenum Disulfide to Lithium based grease makes this Lubricant especially effective for sliding motions, such as sleeve-journal rotating shafts and Automotive ball joints.
  • 0 to 280 degrees Fahrenheit operating range.
  • Drop point 360 degrees F not for disc Brake wheel bearing applications.
  • NOT for disc Brake wheel bearing applications.
Check Stock

Sunlite BRAKESET SUNLT MX1000 ALY RRw/FT Bolt BK

  • Used for brake systems of ordinary bikes, mountain bikes and road bikes..
  • Freewheel Threaded Hubs, Hole distance of 48mm, an inner diameter of 34mm(approx).
  • Position: Front / Rear. F-160mm/R-140mm. F-180mm/R-160mm. ROTOR MOUNTING BOLTS are included.
  • Note: F160 Front Brake: (Also named F160/R140) If installed at front wheel, it fits 160mm rotor, but if installed at rear wheel, it fits 140mm rotor. R160 Rear Brake: (Also named F180/R160) If installed at front wheel, it fits 180mm rotor, but if installed at rear wheel, it fits 160mm rotor..
  • Package Content: Mechanical Bike 160mm Rotor Front and Back Brake Disc Kit x 1.
Check Stock

26" Rear Mag Wheel ONLY with 120mm Width for Rotary Single Speed Flywheel / 26 Inch Magnesium Wheel/Black/Disc Brake - for Beach Cruisers, MTB's, and Gas Powered Bicycles

  • For Rotary Single Speed Flywheel, For non-motorized bicycles, the max loading is 385 lb/175kg. For motorized bicycles, the max safty loading is 330 lb/150kg..
  • Put grease/lubricating oil on thread of wheel to prevent damage of thread from Riding. Thread size: 1.375 inch X24T.
  • Light and very durable. 26"/26 inch Size Wheel.
  • the hole spacing for front disc brakes of mag wheel to be added is 44mm.
  • the hole spacing for front disc brakes of mag wheel to be added is 44mm,Package: 1pc Rear Wheel with Related Axle.
  • NOTE: It's inevitable that there will be SCRATCHES or PAINT PEELING during transportation, buy carefully if you are concerned..
Check Stock

LEZYNE RAP II Bicycle Multi-Tool 25 CO2 Anti-Corrosion Bits Chain Breaker Tool CO2 Inflator Phillips Multi-function Flat Tool

  • Enhanced Anti-Corrosion Black CRV Bits Wraped.
  • HEX 2/2.5/3/4/5/6/8mm - T10/T25/T30 - PHILLIPS, FLATHEAD.
  • CHAIN BREAKER TOOL(INCLUDED HEX 8/10MM WRENCH, 4 SPOKE WRENCHES).
  • MULTI-FUNCTION FLAT TOOL(BOTTLE OPENER, DISC BRAKE WEDGE, ROTOR TRUING TOOL), CO2 INFLATOR, 183G.
Check Stock

Framed Counsel BMX Bike Mens Sz 27.5in Blue

  • TOP TUBE - The Counsel is Framed Bikes entry level BMX bike made for youth and smaller adults who want to get into BMX and progress their skills to the next level. The extra long 21.5" top tube on the Counsel model delivers a better fit for larger riders who need a bit more room between the saddle and the handlebars..
  • FORK - Hi-Ten Steel fork With Chromoly Legs provides a lightweight yet responsive and comfortable feel..
  • FRAME - 6061 Alloy frame is a lightweight but strong material and provides a smooth and comfortable ride on the street or in the park..
  • BRAKE - The Avid BB5 disc brake with 160mm rotor and Avid Alloy Lever provide a smooth and reliable stop when you need it most..
  • A professional bike mechanic has all the tools and expertise to assemble your bike quickly and precisely. Having a pro assemble your bike will save time, avoid unnecessary repairs and mitigate any potential safety hazards from doing it yourself. A professional will go above and beyond by checking the bearings, truing the wheels, correctly tensioning the drivetrain and adjusting the brakes to ensure that you have a perfectly tuned bike. Leave it to a pro so you can start riding without worry!.
Check Stock

Niome Black 90/100 14\ Rear Wheel Tire and Rim Inner Tube with 12mm Bearing Assembly Fit For 110-125cc Dirt Pit Bikes

  • This is the 14" front dirt bike wheel assembly commonly used on many 50cc, 70cc, & 90cc dirt bikes..
  • The assembly comes complete with the front rim, 2.50-14 knobby tire, inner tube, wheel bearings and brake disc rotor..
  • Please note: Tire sizes vary by ride, please check your current tire and wheel sizes before placing the order..
  • Package include: 1 x Tire + 1 x Rim + 1 x Inner tube + 1 x Brake disc rotor.
Check Stock

Venzo Bike Wheel Economic Truing Stand Bicycle Wheel Maintenance - Great Tool for Rim Truing 16" to 29"

  • COMPATIBILITY: Axle compatible with QR, 15 x 100mm & 110mm, 12 x 142mm. ( NOT for 20mm Thru Axle). Accepts wheels from 16" up to 29” with or without tires. Both front and rear hub could be mounted by switching wheel holders..
  • ECONOMIC: Great for light use customers who may only use the truing stand once or twice a year. Please note: This is not a professional level wheel truing stand..
  • QUALITY: Truing stand is made of quality steel, and manufactured well. It comes with more comfortable knobs for smooth accurate and easy operation..
  • FOLDABLE: Quickly fold the stand for storage when not in use. Foldable to 53cm x 28cm x 6cm. Weight: 1817g = 4lbs.Height: 480mm..
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide 2-year warranty! Made in Taiwan..
Check Stock

Detroit Axle - Front Wheel Bearing Hub Assembly and Drilled Slotted Brake Kit Rotor w/Ceramic Pad Kit for 00-02 Ford Excursion - [00-04 F-250/350 Super Duty] - 4WD Coarse Thread SRW

  • SRW with Coarse Thread Wheel Studs) - [2000-2004 Ford F-250 Super Duty (4WD (Built After 3/22/99 Production Date)....
  • Kit Includes: (2) Front Wheel Bearing & Hub Assembly, (2) Front Drilled and Slotted Disc Brake Rotors, (2) Front Ceramic Brake Pads(Hardware....
  • Hub Specifics: 8-Lug Count, with ABS, and 4 Flange Bolts - Wheel Hubs are designed to meet stringent fatigue requirements to reduce premature failed.
  • Drilled & Slotted Disc Brake Rotors (Up To 20% Better Braking Power than Standard Rotors ) - Zinc Dichromate Plating (Rust Protection) - Authentic....
Check Stock