Top Directional Spool Valve Reviews

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..

Check Stock

Chief G Series P80 Hydraulic Directional Control Valves - Hydraulic Speed Control Valve - 3 Spool, 21 GPM, 4 Way 3 Pos Spring Center, SAE 10 Inlet and Work Ports, SAE 12 Outlet Ports, 3625 PSI

Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
5 Spool Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
Double Acting - This control valve comes with 5 spools and SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
High Efficiency - The relief valve range is up to 3600 PSI and the maximum flow is up to 13 GPM.
Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, log splitters, and more.

Check Stock

Hydraulic Joystick Directional Control Monoblock Valve for Tractor Loader 2 Spool 11 GPM with Joystick

Max operating pressure: P = 3600psi (250 bar).
2 spool hydraulic directional control valve. Release valve adjustable..
Durable cast iron construction provides long-term usage.
Compact design use in small tractors, tractors loaders, log splitters, etc..

Check Stock

findmall Hydraulic Valve Hydraulic Directional Control Valve Double Acting Valve 2 Spool 13 GPM 3600 PSI for Small Tractors Tractors Loaders Log Splitters

Double Acting - 2 Spools monoblock for double acting cylinders..
Durable Quality - This hydraulic directional control valve comes with 2 spool, with cast iron construction for long-time use..
Features - Open Center 4-way 3 position Tandem Spring Center..
High-Efficiency - The relief valve range is up to 3600 PSI and the maximum flow is up to 13 GPM(50L)..
Wide Application - Fit for small tractors, tractors loaders, log splitters, and etc..

Check Stock

Monoblock Hydraulic Directional Control Valve, 3 Spool, 11 GPM, SAE Ports

Hydraulic Spool Valve: Equipped with 1 spool and 1/2" BSPP P port, A port, B port. 3/4" BSPP T port, N port. The maximum pressure of this hydraulic is 3600 PSI, and the maximum flow can reach 21 GPM. The opening and disconnection of hydraulic oil are controlled by connecting the valve to the oil line..
Automatically Reset: The standard spool is spring-returned and can be reset to the neutral position. In addition, there is a spring at the bottom of the handle that makes the joystick easy to control..
Great Inner Valve: The check valve in the valve body ensures that the hydraulic oil does not return, and the overflow valve in the valve body can adjust the working pressure of the hydraulic system..
Compact Structure: 1 spool hydraulic valve is made of aluminum and iron, and the solid structure can provide long-term service. The compact design allows it to install in narrow areas and maximizes its control capabilities..
Widely Used: It is used in hydraulic systems in agriculture, horticulture, forestry, construction, and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, construction machines, loaders, excavators, sweepers, industrial machines, and for other applications hydraulically controlled..

Check Stock

Chief G Series Hydraulic Directional Control Valve with Joystick, Hydraulic Flow Control Valve with 2 Spool 3-pos Spring Center - 10 GPM, 3625 PSI, SAE 8 Work, SAE 10 Inlet/Outlet Ports, 10 lb, 220910

Hydraulic Spool Valve: Equipped with 1 spool and 1/2" BSPP P port, A port, B port. 3/4" BSPP T port, N port. The maximum pressure of this hydraulic is 3625 PSI, and the maximum flow can reach 21 GPM. The opening and disconnection of hydraulic oil are controlled by connecting the valve to the oil line..
Automatically Reset: The standard spool is spring-returned and can be reset to the neutral position. In addition, there is a spring at the bottom of the handle that makes the joystick easy to control..
Great Inner Valve: The check valve in the valve body ensures that the hydraulic oil does not return, and the overflow valve in the valve body can adjust the working pressure of the hydraulic system..
Compact Structure: 1 spool hydraulic valve is made of aluminum and iron, and the solid structure can provide long-term service. The compact design allows it to install in narrow areas and maximizes its control capabilities..
Widely Used: It is used in hydraulic systems in agriculture, horticulture, forestry, construction, and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, construction machines, loaders, excavators, sweepers, industrial machines, and for other applications hydraulically controlled..

Check Stock

Surwit 15810-RAA-A03 VTEC Solenoid Spool Valve Assembly with Oil Pressure Switch & Gasket Compatible with Honda Accord Element CR-V 2.4L Civic Acura RSX 2.0L Part# 15810-RAA-A01 15810-PPA-A01

The VTEC system provides the engine with valve timing optimized for both low and high RPM operations. The VTEC solenoid actually allows oil to flow to the internal galleries of the overhead camshaft. This means that the housing of the solenoid is holding back full engine oil pressure. A spool solenoid valve can direct the flow of hydraulic fluid. The valve is made up of spools that rotate or slide to block and open channels in a hydraulic system..
This VTEC Solenoid Spool Valve Fits for 2003 - 2011 Honda Element 2.4L, 2002 - 2009 Honda CR-V 2.4L, 2003 - 2007 Honda Accord 2.4L, 2002 - 2006 Acura RSX 2.0L, 2002 - 2005 Honda Civic 2.0L..
Customers can find the product you need accurately according to the OE number. OE part number: 917-224, 15810RAAA03, 15810RAAA02, 15810-RAA-A01, 15810PPAA01, 15810PNEG01, 15810-RAA-A03, 917224, 15810-PNE-G01, 15810-RAA-A02..
While a VTEC solenoid rarely goes bad, problems with VTEC not engaging properly are extremely common. Most of the time incorrect wiring is to blame, but occasionally something even smaller is the culprit. When a solenoid is bad, may mean the solenoid's plunger is either mechanically stuck in a closed position and therefore always making contact which may eventually cause the starter motor to burn its w....

Check Stock

Shift Rite Transmissions replacement for 4L80E 1994-1996 Updated Transmission Valvebody MT1 Shift Rite 4L80E

This TCC regulator apply valve kit with a hard-anodized aluminum valve with PTFE seal prevents valve bore related problems..
Sonnax offers a replacement TCC regulator apply valve kit 34994-01K that will prevent valve-bore related problems..
Hard-anodized aluminum valve incorporates a PTFE seal at the main wear area of the bore to prevent oil loss..
The valve spool land at the spring end has been lengthened to provide greater bore-to-valve surface contact, thus further preventing leakage..
The valve spool has annular grooves to help center the valve in the bore..

Check Stock

Hydraulic Directional Control Valve 5 Spool 13 GPM 3600 PSI SAE Ports 4 Way 3 Positions Double Acting Hydraulic Valve for Tractors Loaders Tanks Loaders Log Splitters

SPECIFICATIONS: This log splitter hydraulic flow control valve has a 2-spool, 3-way construction with a processing rate of 18 GPM, ¾” NPT inlet and outlet ports, ½” NPT work ports, and withstands 3625 PSI pressure. It weighs only 5 lb (2.26 kg)..
POWER PACKED: With a processing rate of 18 GPM, the hydraulic valve log splitter is way more powerful and efficient than normally available options. This log splitter valve with one spool can split heavy, dense logs in minimal time..
HIGH TOLERANCE: This wood splitter valve control with a hydraulic relief valve tolerates pressure up to 3625 PSI. This prevents internal damage to the hydraulic valve handle even when it is being used to exert intense pressure..
FAST ACTION: Our wood splitter valve control has a 4 way, 3 position tandem spring center that extends the cylinder’s piston rapidly and helps in high-speed, high precision log splitting. Chief’s hydraulic valve 1 spool is simple and fast..
TIME SAVING: Our log splitter valve has an auto return detent lever handle. You can position the next log to be split while the piston repositions itself. The log splitter auto return detent makes log splitting convenient and quick..

Check Stock

VEVOR Hydraulic Directional Control Valve, 6 Spool Hydraulic Spool Valve, 11 GPM Hydraulic Loader Valve, 4500 PSI Directional Control Valve, Hydraulic Valves and Controls for Tractors Loaders Tanks

Hydraulic spool valve: Equipped with 6 spools and 1/2" BSPP type ring inlet/outlet ports. Maximum pressure of this hydraulic is 4500 PSI, and maximum flow can reach 11 GPM. The opening and disconnection of hydraulic oil are controlled by connecting the valve to the oil line..
Double acting cylinders: Hydraulic control valve used to operate double-acting cylinders. All standard spools are spring-returned and can be reset to the neutral position. There are springs at the bottom of the handles that make the joysticks easy to control..
Great inner valve: The check valve in the valve body ensures that the hydraulic oil does not return, and the overflow valve in the valve body can adjust the working pressure of the hydraulic system..
Compact structure: 6 spool hydraulic valve is made of aluminum and iron, and the solid structure can provide long-term service. The compact design allows it to install in narrow areas and maximizes its control capabilities..
Widely used: It is used in hydraulic systems in agriculture, horticulture, forestry, construction, and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, construction machines, loaders, excavators, sweepers, industrial machines, and for other applica....

Check Stock

HOMELODY Shower Faucet Set Matte Black Bathtub Faucet Set,2 Shower Head Combo System for 25-Spray Modes,2 in 1 Shower Tub Kit with Diverter,Shower Trim Kit With Valved

...e, Power Mist, Rain Massage, Rain Mist. Top spray and hand-held showerhead could discharge water at the same time ,turn switch to choose 5 basic functions or 25 combined water flow patterns..If you have any problem, please kindly send the message. We will provide the best solution for you..
【Pressure Balance Valve Spool】This Dual shower head kit 's pressure balance valve spool can automatically stop the water outlet when the cold or hot water supply pressure suddenly changes to avoid hot and cold problems / scalding accidents.This shower fixtures especially suitable for children, elderly and people with limited mobility..
【Equipped with Spool Protection Sleeve】It is used to protect the valve core from being damaged during transportation, when shower trim kit are attached on the tiles, it can assist the main valve body to be fixed on the wall and be used to align the surface of tiles,and you can take out by rotating it counterclockwise. Function of the hollow part: you can adjust the flow of the valve body with a screwdriver through the hollow part..
【Bathtub Spout Lifiting Rod】To install the our bathtub nozzle of our shower tub Kit , you need to prepare the internal copper pipe that adapts to the actual situation of your pipeline.When the li....

Check Stock

American Standard TU075507.295 Colony PRO WS PB SHWR Trim W CART, Brushed Nickel

Includes One-Piece Cartridge: Simplifies installation and maintenance..
Double Ceramic Pressure Balance Cartridge: Combination of Ceramic Disc Mixing Valve and a Ceramic Balancing Spool in a one-piece cartridge..
Ceramic Disc Mixing Valve: Assures a lifetime of drip-free performance and smooth handle operation..
Ceramic Balancing Spool: Maintains a constant output temperature in response to changes in relative hot and cold supply pressure. Ceramic material is unaffected by mineral deposits and harsh water conditions..
Integrated Check Valves: Engineered to eliminate cross flow..

Check Stock

AC14RL3A String Trimmer Replacement Spool Line Suitable for Ryobi One+18v 24v 40v Cordless Trimmers,0.065 Auto Feed Cordless Weed Eater Spools Line with AC14HCA Cap Covers Parts 8 Spools 1 Cap

[You will get]: 0.065" replacement line: 9 pack of twisted copolymer nylon resin and synthetic trimmer/edger line (8 Replacement Line Spool, 1 Trimmer....
[Fits Models]: AC14RL3A Ryobi One+ Spool suitable for multiple cordless trimmers models: 18V, 24V, 40V.Replaces obsolete part #: 310917001, 3110382AG....
AC14RL3A Compatible with :AC14RL3A Spool AKA Ryobi One+ 0.065 Spool,Ryobi AC14Rl3A,Ryobi Spool,Ryobi Replacement Spool,Ryobi Trimmer Spool,Ryobi Spool....
Weeding valve cores use centrifugal force and aerodynamics to reduce drag for fast cutting.for ryobi spool replacement 3 pack ,for ryobi easy edge....
AC14RL3A for ryobi cordless trimmer line refill 18v/24v ,for ryobi p2003/2004 replacement string ,for ryobi one spool cap ,for ryobi 0.065 replacement....

Check Stock