Top Diaphragm Metering Pumps Reviews

Voluxe Foot Water Pump, Water Dispenser Extractor, upgraded Lightweight Pumpable Water Dispenser, Bellows Yellow for Outdoor Fishing Sea/Fresh Fishing Hand Washing

  • 1.The all-plastic pneumatic diaphragm pump can not only pump flowing liquids, but also transport some difficult-to-flow media. It has many advantages of self-priming pumps, submersible pumps, canned motor pumps, mud pumps and impurity pumps..
  • 2. No need to irrigate and divert water, the suction range is as high as 10m, the head is 70m, and the outlet pressure is ≥6kgf/cm2.
  • 3. The flow is spacious, the passing performance is good, and the maximum particle diameter allowed is 4mm. When pumping mud and impurities, there is little wear on the pump.
  • 4. The head and flow can be adjusted steplessly through the valve opening (air pressure adjustment is between 1-7kgf/cm2).
  • 5.The pump has no rotating parts and no shaft seal. The diaphragm completely separates the pumped medium from the moving parts of the pump and the workpiece medium, and the conveyed medium will not leak out. Therefore, when pumping easy to play or corrosive media, it will not cause environmental pollution and endanger personal safety.
Check Stock

SHURflo Industrial Pump - 198 GPH 115 Volt 1/2in Model# 2088-594-154 Silver 2-Pack

  • The SHURflo 2088-594-154 Delivery Pump delivers reliable performance in high flow, moderate pressure applications. 2088 series pumps are used in a....
  • Features: 3.3 GPM flow rate Positive Displacement 3 Chamber Diaphragm Santoprene Valves & Diaphragm Poly Housing 45 psi Demand Switch 1/2" - 14 Male....
  • Applications: Water delivery RV Potable Water.
  • SHURflo warrants Industrial 2088 series pumps to be free from material and workmanship defects (under normal use and service) for a period of one (1)....
Check Stock

Udor 8700.02 Diaphragm Repair Kit for Kappa 30/40/T35 - Desmopan

  • Works on the Udor Kappa 30 / 40 / T35 Diaphragm Pumps.
  • Kit includes 1 Accumulator diaphragm (# 0903.14), 2 Desmopan Diaphragms (# 0903.38), 4 Valve O-rings (# 1101.27).
Check Stock

K4502 Goyen Diaphragm Replacement Kit

  • Works on the Hypro D252 and D252GRGI Diaphragm Pumps.
  • Kit includes 2 x Desmopan Diaphragms - Clear (# 9910-800085), 1 x Accumulator Diaphragm (# 9910-800190), 2 x Head O-Rings (# 9910-480440 ), 2 x Head O-Rings (# 9910-800210).
Check Stock

PondAir 4 Replacement Diaphragm Kit

  • Works on the Udor IOTA 17, 18, and 20 Diaphragm Pumps.
  • Kit includes 1 Accumulator Diaphragm (# 0903.08), 2 Desmopan Diaphragms (# 0903.41), and 4 Valve Assembly O-Rings (# 1101.52).
Check Stock

Baracuda R0527700 MX8 Cleaner Hose for Pool Cleaner (Fоur Paсk)

  • This listing includes everything needed to get started today ~ New G3 Cleaner For In-Ground Pools, 36 Feet of Hose and an additional Diaphragm and additional finned disc..
  • works with low-speed pumps for maximum efficiency. Durable Long-Life Diaphragm with reliable, one-moving-part-technology.
  • FlowKeeper Valve automatically regulates water flow to maintain peak cleaning performance even with lower horsepower pumps. Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces..
  • 36-Fin Disc increases adhesion to pool surface and avoids getting hung-up on lights, drains covers, fittings and other pool features..
  • The Zodiac G3 In-Ground Suction Pool Cleaner is a quiet and powerful suction cleaner that works with low-speed pumps to clean with maximum efficiency..
Check Stock

Irritrol 311A-1 Intl. Bleed 1

  • Upper body and air-vent cap constructed of glass-filled nylon.
  • Rugged, double-beaded nylon-reinforced buna-n diaphragm.
  • Internal and external bleed (flush mode).
  • Accepts omnireg modular pressure regulator.
  • Externally removable self-cleaning metering system.
Check Stock

Irritrol 2400S Slip Globe Valve, 1

  • Threaded bonnet design - Allows easy servicing without removal from the system.
  • Rugged, double-beaded SANTOPRENE diaphragm - Ensures a leak-proof seal.
  • Internal and external bleed (flush mode) - Allows for manual operation.
  • Full stainless-steel metering system - Allows for consistent valve operation.
  • Available in multiple configurations-female NPT, slip, male x male and male x barb.
Check Stock

Irritrol 2400T Globe NPT Threaded Connection, 1

  • Threaded bonnet design - Allows easy servicing without removal from the system.
  • Rugged, double-beaded SANTOPRENE diaphragm - Ensures a leak-proof seal.
  • Internal and external bleed (flush mode) - Allows for manual operation.
  • Full stainless-steel metering system - Allows for consistent valve operation.
  • Available in multiple configurations-female NPT, slip, male x male and male x barb.
Check Stock

Irritrol 2600T Angle Valve with NPT Threaded Connection, 1"

  • Threaded bonnet design - Allows easy servicing without removal from the system.
  • Rugged, double-beaded SANTOPRENE diaphragm - Ensures a leak-proof seal.
  • Internal and external bleed (flush mode) - Allows for manual operation.
  • Full stainless-steel metering system - Allows for consistent valve operation.
  • Available in multiple configurations-female NPT, slip, male x male and male x barb.
Check Stock

Super Stars Manifold Gauge HVAC Diagnose Refrigerant Charging Tool for R-22/R12/R502/R134a/R404a, 3 Way A/C Manifold Gauge (90cm Hoses)

  • Includes Premium 3ft Pro-Set hoses, Solid Forged Brass Construction with Hanging hook for easy use.
  • Oversized refrigerant sight glass Advanced diaphragm valve design.
  • Anodized aircraft aluminum block body with heavy duty plastic valve handles.
  • Superior refrigerant metering capabilities.
  • Refrigerant Applicable: R22/R12/R502/R134a/R404.
  • Certified 1 year trouble-free valve life.
Check Stock

Basic Repair Kit & Seal for Suntec A2VA7116 A2VA3006 A1VA7112 Oil Burner Pumps

  • BASIC Suntec Pump Repair Kit For Most Suntec & Beckett Model "A" Series Pumps. Includes most common failed parts - Seal, Internal Diaphragm, Cover Gasket and Strainer..
  • Seal is 7/8" diameter x 1/4" high x 5/16 diameter shaft. Diaphragm Fits on top of gear set. Be sure to spin shaft by hand while tightening the gear set..
  • Cover Gasket is full coverage, keeping contaminants out of the gear set..
  • The Lip Seal, Shaft Seal DOES NOT fit early bronze nosed, face seal pumps, such as 7016 & 7012..
Check Stock

Irritrol 205 in-Line Valve with Flow Control 1 in Slip | 205SF

  • Patented floating metering system - Allows this valve to easily handle dirty water.
  • High-flow, low friction loss design combined with low-flow capability - Can handle a wide range of applications.
  • Rugged, double-beaded SANTOPRENE diaphragm - Ensures a leak-proof seal.
  • Internal and external bleed (flush mode) - Allows for manual operation.
  • Available in female NPT or slip configurations.
Check Stock