Top Depressed Reviews

Dynabrade 50302 4-Inch Right Angle Depressed Center Wheel Grinder

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 4-Inch Diameter, Right Angle, 1 hp, Rear Exhaust, 12,000 RPM.
  • Accepts optional 4-Inch diameter Type 27 Depressed Center Wheel, with 5/8-Inch center hole (wheel width of 1/8-Inch to 1/4-Inch).
  • Package dimensions:10.25"L x 16.5"W x 3.0"H.
Check Stock

LubriMatic 30-114 Continuous Flow Air Operated Grease Gun

  • Continuously pumps grease while trigger is depressed.
  • 2-way loading: 14 oz. cartridge or suction load.
  • Head cap port for adding air bleeder valve or bulk loader fitting.
  • Capable of 3-way loading: 14 ounce cartridge bulk or suction.
  • Recommended inlet pressure 90 PSI and dispenses 5 ounces per minute.
Check Stock

12V 50A Waterproof Switch Push Button Cars Boat Track Horn Engine Start Starter

  • Heavy Duty Waterproof Construction - 12 Volt / 50 Amp.
  • Requires a 5/8" hole for mounting (No Wires Are Included).
  • Design: SPST Momentary - Switch only remains active (ON) as long as it is depressed. If the switch is not being depressed, it remains in the 'OFF"....
Check Stock

Dynabrade 50303 4-1/2-Inch-5 Inch Vertical Depressed Center Wheel Grinder

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 4-1/2-Inch- 5-Inch Diameter, Vertical, 12 hp, Side Exhaust, 12,000 RPM.
  • Accepts optional Type 27 Depressed Center Wheel in diameters of 4-1/2-Inch and 5-Inch, with 7/8-Inch center hole (wheel width of 1/8-Inch to 1/4-Inch).
  • Package dimensions:10.25"L x 8.25"W x 6.75"H.
Check Stock

Dynabrade 50340 4-1/2-Inch-5 Inch Pistol Grip Depressed Center Wheel Grinder

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 4-1/2-Inch- 5-Inch Diameter, Pistol Grip, 7 hp, Rear Exhaust, 11,000 RPM.
  • Accepts optional Type 27 Depressed Center Wheel in diameters of 4-1/2-Inch and 5-Inch, with 7/8-Inch center hole (Wheel width of 1/8-Inch to 1/4-Inch).
  • Package dimensions:10.0"L x 8.25"W x 6.75"H.
Check Stock

BHA Metal and Stainless Steel Depressed Center Cut Off Wheels for Angle Grinders 4.5” x .045” x 7/8” - 25 Pack

  • 25 Pack Depressed Center Metal Cutting Discs.
  • High Performance 4.5" Depressed Cut Off Wheel.
  • Ultra-thin design for minimal material loss.
  • Proprietary aluminum oxide grain for agressive cutting action.
Check Stock

Pilot Automotive IL-7443-15RBK Flashing Brake Light Bulb (2pc / Red), 1 Pack

  • Super bright 2835 SMD technology provides better brake light visibility for other drivers.
  • When the brake pedal is depressed the bulb comes on solid, flashes, then stays solid as long as pedal is depressed.
  • Long life, 50,000 hours of continuous use saves you time and money.
  • Direct replacement for most factory applications utilizing the same bulb ID system.
  • Draw less energy, and produces less heat than regular incandescent bulbs.
Check Stock

Dynabrade 54767 3\ (76mm) Dia. Right Angle Type 27 Depressed Center Wheel Grinder.7 hp, 18000 rpm, Composite

  • Model accepts optional 3" (76 mm) diameter Type 27 reinforced Depressed Center Wheels, with 3/8" (10 mm) center hole.
  • wheel width of 1/8" to 1/4" (3 mm to 6 mm).
  • Dual-wick lubrication system saturates gears with oil for increased performance, extended life and reduced downtime.
  • Adjustable wheel guard provides maximum operator protection.
  • 3" (76mm) Dia. Right Angle Type 27 Depressed Center Wheel Grinder, .7 hp, 18000 rpm, Composite.
Check Stock

Dynabrade 54791 4\ (102mm) Dia. Right Angle Type 27 Depressed Center Wheel Grinder.7 hp, 13500 rpm, Steel

  • Model accepts optional 4" (102 mm) diameter Type 27 reinforced Depressed Center Wheels, with 3/8" (10 mm) center hole.
  • wheel width of 1/8" to 1/4" (3 mm to 6 mm).
  • Dual-wick lubrication system saturates gears with oil for increased performance, extended life and reduced downtime.
  • Adjustable wheel guard provides maximum operator protection.
  • 4" (102mm) Dia. Right Angle Type 27 Depressed Center Wheel Grinder, .7 hp, 13500 rpm, Steel.
Check Stock

Dynabrade 54775 4\ (102mm) Dia. Right Angle Type 27 Depressed Center Wheel Grinder.7 hp, 13500 rpm, Composite

  • Model accepts optional 4" (102 mm) diameter Type 27 reinforced Depressed Center Wheels, with 3/8" (10 mm) center hole.
  • wheel width of 1/8" to 1/4" (3 mm to 6 mm).
  • Dual-wick lubrication system saturates gears with oil for increased performance, extended life and reduced downtime.
  • Adjustable wheel guard provides maximum operator protection.
  • 4" (102mm) Dia. Right Angle Type 27 Depressed Center Wheel Grinder, .7 hp, 13500 rpm, Composite.
Check Stock

Dynabrade 54793 4\ (102mm) Dia. Extended Right Angle Type 27 Depressed Center Wheel Grinder.7 hp, 13500 rpm, Steel

  • Model accepts optional 4" (102 mm) diameter Type 27 reinforced Depressed Center Wheels, with 3/8" (10 mm) center hole.
  • wheel width of 1/8" to 1/4" (3 mm to 6 mm).
  • Dual-wick lubrication system saturates gears with oil for increased performance, extended life and reduced downtime.
  • Adjustable wheel guard provides maximum operator protection.
  • 4" (102mm) Dia. Extended Right Angle Type 27 Depressed Center Wheel Grinder, .7 hp, 13500 rpm, Steel.
Check Stock

Dynabrade 54789 4\ (102mm) Dia. Extended Right Angle Type 27 Depressed Center Wheel Grinder.7 hp, 12000 rpm, Steel

  • Model accepts optional 4" (102 mm) diameter Type 27 reinforced Depressed Center Wheels, with 3/8" (10 mm) center hole.
  • wheel width of 1/8" to 1/4" (3 mm to 6 mm).
  • Dual-wick lubrication system saturates gears with oil for increased performance, extended life and reduced downtime.
  • Adjustable wheel guard provides maximum operator protection.
  • 4" (102mm) Dia. Extended Right Angle Type 27 Depressed Center Wheel Grinder, .7 hp, 12000 rpm, Steel.
Check Stock

Dynabrade 54785 3\ (76mm) Dia. Extended Right Angle Type 27 Depressed Center Wheel Grinder.7 hp, 18,000 rpm, Steel

  • Model accepts optional 3" (76 mm) diameter Type 27 reinforced Depressed Center Wheels, with 3/8" (10 mm) center hole.
  • wheel width of 1/8" to 1/4" (3 mm to 6 mm).
  • Dual-wick lubrication system saturates gears with oil for increased performance, extended life and reduced downtime.
  • Adjustable wheel guard provides maximum operator protection.
  • 3" (76mm) Dia. Extended Right Angle Type 27 Depressed Center Wheel Grinder, .7 hp, 18,000 rpm, Steel.
Check Stock