Top Cutting Insert Reviews

Accusize Industrial Tools 1/2'' Cut-Off Holder, Parting Tool, Mgehr08-2J of 2387-2004, Insert Not Included

  • Insert model for this holder: Carbide insert TiN Coated MGMN-2 Double End Cut-off.
  • For the Cutting Parameters, please refer to the product image..
  • The cutting-off tool can only do cut off jobs. In regard to the other regular cutting, it's better to use the other 6 pieces of the set..
  • Please note that this tool holder comes with NO insert installed. Only a holder..
Check Stock

OSCARBIDE 3/8

  • Mini Turning Tool holders with 3/8'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

Accusize Industrial Tools 5/8\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0058

  • Smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
  • 9pcs hex screw, Hexagon key and Aluminum fitting case..
  • *** Insert kit Item#: 2988-0058INSERTS (Sold Separately on Amazon)***.
Check Stock

APS Compatible with 05-07 Magnum Lower Bumper Stainless Mesh Grille Insert N19-H61357D

  • ❎ Replacement (Cutting Required) 1 pc Grille Insert. Black powder coated T-304 stainless steel wire woven mesh grille insert and stainless steel....
  • Wire size: 1.8mm spacing size: 6.7mm x 6.7mm.
  • [Important] Replacement (Cutting Required).
  • All necessary hardware and instruction are included. Grille insert only, logo or emblem, frame or shell is NOT included..
Check Stock

Accusize Industrial Tools 3/8'' Shank 7 Pc Indexable Carbide Turning Tool Set in Fitted Box, 2387-2003

  • Black oxided smooth finish on each turning tool holder style and shank size..
  • Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screws and wrench included. 7Pcs indexable turning tool holder. 7Pcs TiN coated C6 carbide inserts. 7Pcs hex screws. 3Pcs hexagon keys..
  • Details, recommended cutting speeds and specifications are in the description.
Check Stock

JoyTube 35 Pcs Thread Repair Kit, Stainless M6 x 1mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required..
  • 【Checking】Check that the thread and pitch of the tap and the bolt match..
  • 【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)..
  • 【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break..
  • 【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC2135 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RM, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • INSERT TYPE: 2 edge round, full profile grooving insert.
  • INSERT SEAT SIZE F = matching insert & tool holder.
  • EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
  • RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
  • START CUTTING VALUES: Stainless Steel - fnx 0.006 in/r(0.003-0.008), vc 330 sfm(290-415), fnz 0.016 in(0.009-0.022).
  • Steel - fnx 0.006 in/r(0.003-0.008), vc 410 sfm(365-500), fnz 0.016 in(0.009-0.022).
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC3115 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RM, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • INSERT TYPE: 2 edge round, full profile grooving insert.
  • INSERT SEAT SIZE F = matching insert & tool holder.
  • EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
  • RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
  • START CUTTING VALUES: Cast Iron - fnx 0.006 in/r(0.003-0.008), vc 540 sfm(480-650), fnz 0.016 in(0.009-0.022).
  • Steel - fnx 0.006 in/r(0.003-0.008), vc 690 sfm(610-840), fnz 0.016 in(0.009-0.022).
Check Stock

Accusize Industrial Tools 3/4'' Shank 7 Pc Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2006plus

  • Shank Size (H x W): 3/4" x 3/4". Overall Length: 4-1/2". Insert screw and wrench included.
  • Including 2 of MGMN300, 16ER, WCMT32.5, CCMT32.5, DCMT32.5 Carbide Inserts.
  • Black oxided smooth finish on each turning tool holder style and shank size..
  • Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Including: 7 pcs indexable turning tool holder.
  • The cutting-off tool can only do cut off jobs. In regard to the other regular cutting, it's better to use the other 6 pieces of the set..
Check Stock

GBJ 10pcs RCMT10T3M0 Gold + SRDCN 1616H10 5/8\ 45° Lathe Turning Holders Lathe Turning & Profiling Tool Holder for Round Carbide Inserts RCMT (SRDCN1616H10+RCMT10T3M0 YBC251)

  • Smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
  • 9pcs hex screw, Hexagon key and Aluminum fitting case..
  • *** Insert kit Item#: 2988-0001INSERTS (Coming Soon)***.
Check Stock

Reed Tool PPR200 Clean Ream Extreme with 3/8-Inch Hex Shaft, 2-Inch Head

  • Reams 2-Inch Sch. 40 PVC, CPVC and ABS Fittings.
  • Can be used with standard drills, cordless drills, or impact drills.
  • Works great for vent lines, drain lines, water lines.
  • Feature a 4-sided carbide insert which provides an extra cutting edge after 180-Degree cutting insert rotation.
  • PPR Fitting Reamers are NOT recommended for use on pressurized systems.
Check Stock

Indexable Lathe Turning Tool,1/2'' Shank 7 Pieces Carbide Turning Tool Set,Metal Lathe Tools Holder for Turning Grooving Threading with Tin Coated Carbide Inserts Turning insert

  • 1.Package include: 7pcs Holders with inserts (Installed,as the pictures show),Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included.
  • 2.The holders made of quality cemented carbide and tungsten steel（40CrMo）, HRC up and down 48 degrees ， high hardness,Offer long life and faster cutting speed.
  • 3.The inserts: carbide material with CVD coating ,used for machining stainless steel and steel,Used for turning and finishing on a wide range of materials，the blade is sturdy, low friction coefficient, wear-proof and stable，Good wear resistance, sharp and durable ,smoothing cutting.
  • 4. 7pcs different angles can cut out any model you want with high precision，S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand，S12M-SCLCL06 is left hand , the dimensions as the same as the right hand, other 5pcs holders is 3.9inches/100mm, and the shank diameter is 1/2.
Check Stock

Sandvik Coromant, QD-NG-0300-0002-CM 1125, CoroCut QD Insert for Parting, Carbide, Neutral Cut, 1125 Grade, (Ti,Cr,Al) N+(Ti,Al) N (Pack of 10)

  • INSET TYPE: Secure parting off and deep grooving insert.
  • Rail insert & holder design for stable and preices insert positioning.
  • CM = Cut-off Medium, parting geometry, high cutting edge line securtiy with premium chip breaking design.
  • START CUTTING VALUES: Steel - fnx 0.004 in/r(0.003-0.008), vc 580 sfm(510-710), fnz 0 in(0-0).
  • Stainless Steel - fnx 0.004 in/r(0.003-0.008), vc 465 sfm(410-580), fnz 0 in(0-0).
Check Stock