Top Cut off Tool Reviews

Dynabrade 52420 3-Inch 7-Degree Offset Cut-Off Wheel Tool

  • Cut-Off Wheel Tool, for efficient cutting of sheet metal, frame rails, clamps, bolts, etc.
  • 3-Inch Diameter, 7 Degrees Offset, 5 hp, 20,000 RPM, Front Exhaust.
  • Accepts optional 3-Inch diameter Type 1 Cut-Off Wheels.
  • Cut-off Wheel Tool, For Efficient Cutting Of Sheet Metal.
  • 3-inch Diameter, 7 Degrees Offset, 5 Hip.
  • Accepts Optional 3-inch Diameter Type 1 Cut-off Wheels.
Check Stock

Ridgid R63015 Spiral Cutter, 1-1/4-Inch, Silver

  • ✔ 2-WAY CUTTING - First ever siding brake cutter / Cut-off tool to 003cb003ecut003c/b003e effortlessly 003cb003ein both directions (right to left + left to right).003c/b003e -- Fits all Van Mark brakes and all Tapco PRO Series Brakes (1995 and after).
  • ✔ 1" OFFSET CUTS - Three cutting wheels make 003cb003eaccurate, clean and effortless003c/b003e cuts at 1" offset up yo 2 layers of aluminum coil stock or up to 24 gauge Stainless Steel..
  • ✔ STAYS ON THE BRAKE - With roller wheels, the 2-Way Cut-Off Tool is 003cb003eanchored to the brake's anvil.003c/b003e This allows it to travel the length of the brake to make a cut, and then later travel back the other way to make the next cut, while still attached to the brake..
  • ✔ TUCKS OUT OF THE WAY - This siding bender cut-off tool automatically retracts to fold on itself. By doing so, it does not interfere with the bending process..
  • ✔ LIGHTWEIGHT + QUALITY & DURABILITY - 003cb003eLightest003c/b003e portable siding bender 003cb003ecut-off tool003c/b003e in the industry (Half the weight) for easy handling - 003cb003eLong lasting003c/b003e heat treated and zinc plated cutting wheels - CNC machined and anodized body and tracking pulleys - 003cb003eHigh quality003c/b003e sealed roller bearings & stainless steel f....
Check Stock

S SATC 4 1/2 Cut Off Wheel 50 PCS Cutting Wheels 4.5 x.040 x7/8 Angle Grinder Cutting Disc Ultra Thin Metal & Stainless Steel

  • ☞LONGEST LASTING: Cut off wheels feature metal center and ultra-thin 0.040" thickness. 50 pieces cutting disc for metal & stainless steel meet ANSI safety requirements. Grinder Wheel Dimensions: 4 1/2"x0.040"x7/8".
  • ☞PERFECT ALUMINUM: 4 1/2 cut off wheel is made with a proprietary combination of alumina particles for aggressive cutting action, providing the industry's best balance of cut life, cut rate, cut accuracy, power requirements and heat build-up, to give you unmatched cut time, consistent precise integrity, moderate power requirements and relatively low heat build-up.
  • ☞FITS ANY ANGLE GRINDER: 50 PCS cut-off wheels for metal & stainless steel fast burr-free cutting feature 4 1/2"x0.040"x7/8" , compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool..
  • ☞MULTIPLE UESES: Cut off wheels 4 1/2 inch are designed for cutting fiberglass, steel, iron, plastic, stainless steel including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel , and other ferrous metals..
  • ☞Attention Please: Cutting disc is made in accordance. Before using these, please wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
Check Stock

QLOUNI 36PCS Rotary Cutting Wheels Tool Kit, Mini Diamond Cutting Wheel and HSS Circular Saw Blades and Resin Metal Cutting Wheels Tools Wood Metal Stone Cutting with Mandrels

  • ★[Resin Cut Off Discs] With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging grinders, electric grinders, etc. They can be used to cut metal, plastic, chassis modification, thin metal circuit board and DIY production after connected with mandrels, and are ideal for olive cutting..
  • ★[HSS Circular Saw Blades] The cut off saw blades are high speed steel and there are 5 kinds of outer diameters 22/25/32/35/44/50mm. They are suitable for cutting wood, plastic products, aluminum alloy, soft metal, etc..
  • ★[Diamond Cutting Wheels] The cutting wheels are made of high quality diamond. With high cutting efficiency, high durability, stable quality, etc., they are suitable for cutting gem, jade and glass..
  • ★[Great Tool for DIY] Compatible with most power rotary tools. The cutting wheel set for rotary tool is suitable for cutting wood, plastic, gem, glass, aluminum alloy and jade. They are a great tool as well as perfect gift for DIY hobbyists..
  • ★[Package Details] 36Pcs Rotary tool mini cutting discs sets include 20Pcs Resin Cutting Wheel Cut-off Discs, 6 Pcs Hss Circular Saw Blades, 10 Pcs Diamond Cutting Wheels. With 6 Pcs Mandrels..
Check Stock

BHA Metal and Stainless Steel Cut Off Wheels for Die Grinders 4” x 1/16” x 3/8” - 25 Pack

  • 4" x 1/16" Cut Off Wheel with 3/8" Arbor.
  • 1/16 Inch (.0625") Thickness for Long Life and Increased Durability.
  • Compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool.
  • Capable of cutting fiberglass, plastic, iron, steel, stainless steel, and other ferrous metals.
Check Stock

BHA Metal and Stainless Steel Cut Off Wheels for Die Grinders, 3” x 1/16” x 3/8” - 25 Pack

  • 3" x 1/16" Cut Off Wheel with 3/8" Arbor.
  • 1/16 Inch (.0625") Thickness for Long Life and Increased Durability.
  • Compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool.
  • Capable of cutting fiberglass, plastic, iron, steel, stainless steel, and other ferrous metals.
Check Stock

OEMTOOLS 26528 10 Piece Cut Off Wheel Set with Mandrel, Cutoff Wheel Mandrel Set, Premium Metal Cutting Wheels w/ 3/8" Arbors, Die Grinder Cut Off Wheel

  • Superior Cutting: Get the best means for cutting fiberglass, plastic, steel, and other ferrous metals with our angle grinder cut off tool.
  • The flathead notch on the mandrel adaptor makes fitting the air tool arbor cutting wheels into tight spaces easy.
  • Compatible Discs: Our cutting discs are great for use on die grinders, air cut off tools, and angle grinders.
  • Get clean burr-free cuts every time with our 3 inch cut off wheel.
  • Excellent Maintenance Tools: Cut through the metallic fluid or oil lines of your vehicles with ease using our air cutting wheel.
  • Stuck bearings, bolts, screws, and more are removable with the premium metal of our 1/32” thick cut off wheels.
  • Durable Materials: Get strength from our cutting wheels for metal.
  • These cutting discs are 1/32” thick for long term use and made of premium metals that work at a max RPM of 20,400.
  • Product Specifications: 10 piece 46 Grit 3” x 1/32” cut off wheels.
  • Cutting discs feature 3/8” arbor holes.
  • Mandrel designed to fit 0.625 to 1/32” thick cut off wheels.
  • Cuts fiberglass, plastic, iron, steel, and other ferrous metals.
Check Stock

TapeTech 16TT90 MudHead 90 Degree Inside Corner Finisher

  • ✅ HAND-HELD FLAT SURFACE AND CORNER SEAM TAPE APPLICATOR TOOL - Reduces taping time and increases accuracy when applying tape to various surfaces..
  • ✅ RELOAD TAPE ROLLS AS NEEDED - *Only compatible with TitanRF Faraday Tape 2" width x 164' length rolls. Tape not included in this Taperator kit! Multiple tape kit options available..
  • ✅ EASY TO USE - Preferred tool for applying TitanRF Faraday Tape to surfaces, connecting multiple sheets of TitanRF Faraday Fabric, constructing industrial signal-proof rooms and tents, or other RF shielding projects. A trigger actuated cut-off blade slices tape free from the roll cleanly..
  • ✅ RETRACTABLE CREASING WHEEL - Taperator has a retractable creasing wheel for applying pressure evenly to flat surfaces or taping inside hard to reach corners seams..
  • ✅ TRIGGER ACTUATED CUT-OFF BLADE - A trigger actuated cut-off blade slices tape free from the roll cleanly at the end of runs..
Check Stock

Milwaukee 48-38-0010 Cutter Wheel 2-Pack Sold as 4 Pack

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw....
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed....
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from....
Check Stock

Rotary Thread RTM7 Mandrel - Essential for Die Grinder Accessories & Cut-Off Wheels, 3/8" Arbor Hole & 1/4" Stem, Ideal for Holding Die Grinder Bits - Durable Metalworking Tool (2 Pack)

  • ESSENTIAL TOOL: A high-quality and effective tool is a must-have for anyone who wants to work with metal efficiently and safely.
  • PRECISION CUTTING: Holds cut-off wheels securely in place, allowing for precise and with greater efficiency, reducing time and effort for cutting, grinding, sanding, cleaning, or polishing.
  • UNIVERSAL COMPATIBILITY: The die grinder cut off wheel mandrel fits most Type 1 cut-off wheels with a 1/4" arbor hole, making it versatile accessory for use with a wide range of cut-off wheels.
  • IMPROVED SAFETY: The shank and screw are made of A3 carbon steel. It ensures secure attachment of cut-off wheels and reduces the risk of accidents or injuries due to wheel slippage.
  • HIGH-QUALITY, DURABLE and LONG-LASTING: The cutting wheel mandrel is made of A3 carbon steel with black plating, which is corrosion resistant to provide long life.
Check Stock

Simple Combination Mini Quick Change Tool Post Kit Set For CNC Table/Hobby Lathe Aluminium Material

  • Fits 7x10, 7x12 and 7x14 mini lathes, ACCEPT - Turning Holder: 1/4-3/8" Shank.
  • Using the dial, each tool holder can be rotated multiple angle of 9 ° or 9 °, operations with extension units,can be processed various angles work piece..
  • Mounting hardware include 2x mounting bolts (M8 & M10) 2x Allen Key.
  • Holder include: Two turning tool holders, a boring tool holder, a cut-off blade holder..
Check Stock

Cutting Wheel Set 36pcs for Rotary Tool, HSS Circular Saw Blades 6pcs, Resin Cutting Discs 20pcs, 545 Diamond Cutting Wheels 10psc with 2 Screwdrivers

  • RESIN CUT OFF DISCS – With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging grinders, electric grinders, etc. They can be used to cut metal, plastic, chassis modification, thin metal circuit board and DIY production after connected with mandrels, and are ideal for olive cutting..
  • HSS CIRCULAR SAW BLADES – The cut off saw blades are high speed steel and there are 5 kinds of outer diameters 22/25/32/35/44/50mm. They are suitable for cutting wood, plastic products, aluminum alloy, soft metal, etc..
  • DIAMOND CUTTING WHEELS – The cutting wheels are made of high quality diamond. With high cutting efficiency, high durability, stable quality, etc., they are suitable for cutting gem, jade and glass..
  • GREAT TOOL FOR DIY – Compatible with most power rotary tools. The cutting wheel set for rotary tool is suitable for cutting wood, plastic, gem, glass, aluminum alloy and jade. They are a great tool as well as perfect gift for DIY hobbyists..
  • 100% SATISFACTION – If you have any problems, simply contact us and we promise an 100% satisfactory solution. You don't need to worry about returns and refunds..
Check Stock

DIDUEMEN Handheld Without Debugging Tungsten Electrode Sharpener TIG Welding Rotary Tool with Flat Grinding Block Cut-Off Slot Multi-Angle & Offsets

  • Caution: When using this tool, please wear a mask and other protective gear..
  • Miniaturization and High Performance：This tungsten sharpening grinder is a hand-held tool. It is small enough to fit on the TIG table, saving the....
  • Simple and Convenient Operation: Unlike the single-head configuration, this tungsten grinding machine does not require installation and debugging.....
  • 4 Size Brass Tungsten Guide Rails and Four-angle Screw Holes: The tool has four copper tungsten guide rails: 0 / 40 inch, 1 / 16 inch, 3 / 32 inch and....
  • Cut-Off Slot and Rotary Tool : Tungsten sharpening tool also has tungsten cut-off port processing. After the tungsten you are using is worn or....
Check Stock