Top Concrete Block Machine Reviews

AMES BWRF5 Water Base High Strength Elastomeric Liquid Rubber, 5 Gallon White

  • Ames’ Block & Wall Liquid Rubber is a specially formulated blend of adhesive, high strength elastomeric, liquid rubber for waterproofing concrete walls, cinder block, and more..
  • Ames Block & Wall Liquid Rubber is an excellent coating for ICF (insulated concrete forms), metal, wood, concrete, and many other surfaces..
  • Block & Wall Liquid Rubber Waterproofer will fill cracks and crevices up to ⅛ inch. Block & Wall is thick, yet easy to apply and has up to 1800% elongation. Low odor and can be sprayed, rolled or brushed applied..
  • Ames Block & Wall Liquid Rubber is non-toxic, low odor, environmentally friendly, and made in the USA.
  • 5 Gallon, White – Ames Block & Wall is packaged in 5 gallon pails – It is high in solids and dries to a nearly impenetrable tough elastic membrane that is up to 1800% elongation to resist cracking and peeling..
Check Stock

LSA 14 Inch Concrete Saw Diamond Blade,U Shape Carbide Tipped 14 Inch Turbo Segmented Saw Blade,for Concrete Block,Paving Brick,Reinforced Concrete

  • 【Specifications of 14 Concrete Saw Blade】 Segment height 12mm. Arbor 1 inch -25.4mm. MAX RPM 5460 r/min.The holes on core decrease weight and improve cooling,turbo blades remove the debris easily..
  • 【Diamond Sand】 The high density of emery makes the LSA 14 in. segmented diamond blade tip super hard to achieve fast cutting, smooth cut without burrs,extremely fast cutting speed..
  • 【Wet and Dry】 The LSA 14 diamond blade concrete dry cut ensures a smooth cut, while the wet cut gives you the same feeling as cutting butter to maximize cutting life while reducing the cost per cut..
  • 【Applicable Cutting Materials】Concrete block,paving brick,cured concrete,reinforced Concrete can be cut with 14 inch diamond blade stones, but not for cutting metal, plastic, glass..
  • 【Applicable Models】Hand held saw,masonry saw and walk behind saw.Premium diamond U shape teeth can less stress on the operator and machine..
Check Stock

14\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry 12mm Segment Height

  • MULTIPURPOSE - 14" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind..
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone. Not recommended for reinforced concrete and asphalt and green concrete..
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - high speed handheld saws or lightweight walk-behind saws recommended.
Check Stock

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray

  • Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry.
  • High-tack paste resists moisture for application in damp environments and can be used in vertical applications.
  • Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees F and a service temperature range from -20 to +115 degrees F.
  • Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees F).
  • Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry..
  • PC-Concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements..
  • PC-Concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete..
  • PC-Concrete is the best solution for permanent concrete repair..
Check Stock

6 Piece Set (1", 2", 3",4",5",6") Supreme Series Diamond Core Drill Boring Bits to Cut Hard Concrete, Reinforced Concrete Brick and Block

  • 6 Piece Set (1", 2", 3",4",5",6") Supreme Series Diamond Core Drill Boring Bits to Cut Hard Concrete, Reinforced Concrete Brick and Block.
  • Cut the Hardest Materials: Hard Concrete, Cured Concrete, Reinforced Concrete, Concrete Block, Brick.
  • 17" Overall Length 14" Long Barrel Length.
  • Built for Pros who need the highest quality.
Check Stock

HBKEEN Core Drill Bit for Concrete Diamond Laser Welded Core Bits 1-1/4"-7 Threaded for Hard Concrete Brick and Block (8 inch）

  • {Specification} 8 inches Laser Welded Diamond Wet Drilling Core Bits.
  • {Drilling Depth} 14" with mesh segments. Fast,smoothly, long life.
  • {Application} #30/40 diamond grit, designed for drilling concrete, reinforced concrete, hard brick, block and other hard masonry.
  • {Drilling method} Wet use only. Hand held drill, drilling machine.
Check Stock

Protimeter BLD8800-S MMS2 Basic Survey Kit Moisture Meter with Pouch

  • Measures moisture in wood and wood floors, drywall, concrete and concrete block, stucco, plaster, masonry and other building materials.
  • Measure (pin mode) diagnoses the extent of moisture intrusion for damage assessment and monitor drying out of building structures.
  • Search (non-invasive mode) behind ceramic tile, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete and concrete block.
  • Hygrometry measures or monitors buildings for adequate ventilation affecting indoor air quality and moisture problems.
  • This Package Includes: MMS2 Instrument, Short Humidity Quickstick, Hygrostick Humidity Probe, Quickstick External Lead, Heavy Duty Moisture Probe, Deep Wall Probe (5″), Calibration Check Device, Instructions, Software And Cable, Soft Carry Pouch.
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

12" Segmented Diamond Saw Blade for Concrete, Brick, Block and Masonry, 12mm Segment Height, 1" Arbor

  • MULTIPURPOSE - 12" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
Check Stock

Powers Fastening Innovations 06312 3/4-Inch Carbon Steel Drop in Anchor, 10 Per Box

  • Can be used in solid concrete, hard stone and solid block.
Check Stock

Powers Fastening Innovations 06308 1/2-Inch Carbon Steel Drop In Anchor, 50 Per Box

  • Can be used in solid concrete, hard stone, and solid block.
Check Stock

Agri-Fab 45-0365 Push Spike Aerator, Black

  • Expose grass to air, nutrients, and water.
  • Steel weight tray holds concrete block, creates pressure and pushes spikes into ground.
Check Stock

Concrete Molds DIY Grass Concrete Paving Block Concrete Pavers & Paving Stones S62

  • Sold 1 piece Concrete Molds (FOTO 2) Grass Concrete Paving Block.
  • Size 19.68 in x 19.68 in x 2.36 in (500x500x60 mm) Mold is reusable.
  • The mold is made of ABS plastic thickness of 0.078" (1.9-2 мм) Depending on the geometry of the product wall thickness can form less than the above dimensions..
  • Perfect for parking areas in residential and commercial developments, Grass Concrete Paving Block is a great choice if you need a paving product that truly complements its surroundings..
  • This concrete paver is perfect for area that require detailed water management and drainage, need to withstand heavy traffic and abuse. Grow grass in the voids or fill them with gravel to allow rainwater to permeate through and help with areas that suffer from excessive rain water runoff. These pavers are recommended for creating attractive and functional paths, patios, courtyards, driveways and to create off street parking areas.
Check Stock