Top Sell Concrete Block Brick Reviews

4-1/2-Inch Premium Tuck Point Diamond Blade For Mortar, Concrete, Brick - Arbor 5/8'-7/8' - Laser Welded

  • Premium Tuck Pointer Diamond Blade - Laser Welded.
  • This tuck pointer blade allows fast, efficient removal of mortar joints in brick, block or stone. Exterior building surface, interior floors & walls, repair, resurfacing of almost any type of concrete and masonry..
  • Diameter: 4.5" | Arbor: 5/8"-7/8" | Thickness: .250".
  • Application: Concrete | Brick | Block | Mortar.
Check Stock

7\ Segmented Diamond Saw Blade for Concrete Brick Block and Masonry, 10mm Segment Height, 7/8\ Bushing w/Diamond Arbor

  • MULTIPURPOSE - 7" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

zerotop Masonry Drill Bit Set, 10PC Concrete Drill Bit 1/4\ Hex Shank Carbide Drill Bits for Plastic, Tile, Brick, Wood, Glass in Size 3/16, 1/4, 5/16, 3/8, 1/2 Inch

  • High quality carbide tip for fast cutting and extended life.
  • For applications in brick, concrete and block.
  • Package includes 5 premium concrete bits to be used with 3/16" Topcon style masonry screws. For applications in brick, concrete and block. Used by professionals from plumbers to re-modelers.
Check Stock

Makita 2 Pack - 4.5” Turbo Diamond Blades For Grinders & Circular Saws - Ultra-Fast Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Diamond Turbo Blades For FAST Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ QUICKLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds with Makita’s proprietary bond that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADEWEAR & Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVI....
Check Stock

Cutting Pro 14 inch Dry or Wet Cutting General Purpose Power Saw Segmented Diamond Blades for Concrete Stone Brick Masonry (14\)

  • Segment height 10mm. Arbor 1". Size is 14"x.125"x.395"/10 mm. Includes 20 mm heavy duty bushing..
  • Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone..
  • This diamond blade belongs to Cutting Pro Diamond General Purpose Segment Series.
Check Stock

Makita 2 Piece - 4.5” Turbo & Segmented Diamond Blade Set For 4.5”+ Grinders & Circular Saws - Ultra-Fast & Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented + Turbo Rim Diamond Blades For FAST & RELIABLE Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ 1 SEGMENTED Steel disc is ideal for safe and continuous use with minimal warpage risk due to its advanced air flow cooling technology | RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio.
  • ✅ 1 TURBO Steel disc is ideal for quicker and faster cuts in Concrete & Masonry | AVOID BLADEWEAR & Slow Downs with lower priced blade....
Check Stock

Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders & Circular Saws - Long-Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented Diamond Blades For Long-Lasting & Reliable 1.25” Depth Concrete, Cinder Block & Brick CUTTING | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makita’s advanced air flo....
Check Stock

Diamond Saw Blade 10, Dry or Wet timeriver Masonry Blade 10 Inch, Hot Pressing Process, High Durability, Tile Blade 10 Inch is Suitable for Cutting Masonry, Retaining Wall, Granite, Marble, Concrete.…

  • MULTIPURPOSE - 10" blade designed to cut a wide range of construction materials including concrete, brick, block, masonry with performance/price ratio in mind.
  • VERSATILITY - segmented style for fast cuts on concrete, block, brick and stone or turbo style for smooth cuts on concrete, masonry and stone.
  • SHARP SEGMENTED TEETH - diamond encrusted segment allows efficient and precise cuts.
  • USE WET OR DRY - recommended to use high speed handheld saws or lightweight walk-behind saws.
Check Stock

Makita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile

  • ✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application.
  • ✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers.
  • ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
  • ✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | ....
Check Stock

(Qty 1280) Masonry Screws 1/4” x 2-1/4” Blue, Hex Washer Head Concrete Screws Anchor Block or Brick 128 Pack 10/pp (15.99 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 3/16” x 1-3/4” Blue, P/Flat Head Concrete Screws Anchor Block or Brick 64 Pack 20/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 1/4” x 1-3/4” Blue, Hex Washer Head Concrete Screws Anchor Block or Brick 128 Pack 10/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock