Top Compressor Connecting Rod Kit Reviews

2475N7.5-P 7.5hp 80 gal Two-Stage Compressor (230/1)

Long-Life: Durable cast iron construction, long-lasting extended pump life designed for over 15,000 hours of trouble-free use.
Maximum Power and Flexibility: 100% continuous duty, 5 or 7.5 hp two-stage air compressor, 175 psig maximum operating pressure and an 80-gallon ASME receiver tank provide plenty of punch for the most demanding applications.
Easy to Service: Individually cast cylinders, overhung crankshaft and one piece connecting rod simplifies maintenance and service.
Reliable Operation: All Season Select synthetic lubricant increases efficiency.
with 2,000 hours of service between changeouts, it performs four times longer than petroleum-based lubricants.
Two-Year Warranty Available: Purchase an All-Season Select lubricant start-up kit, and receive all the parts you need for start-up and the first year of maintenance, along with an extended pump warranty.

Check Stock

Ingersoll-Rand 2340L5-V 5hp 60 gal Two-Stage Compressor (230/3)

Long-Life: Durable cast iron construction, long-lasting extended pump life designed for over 15,000 hours of trouble-free use.
Maximum Power and Flexibilty: 100% continuous duty, 5 hp 2-stage air compressor, 175 psig maximum operating pressure and a 60 ASME reciever tank provide plenty of punch for the most demanding applications.
Easy to Service: Individually cast cylinders, overhung crankshaft and one piece connecting rod simplifies maintenance and service.
Reliable Operation: All Season Select synthetic lubricant increases efficiency.
with 2,000 hours of service between changeouts, it performs four times longer than petroleum-based lubricants.
Two-Year Warranty Available: Purchase an All-Season Select lubricant start-up kit, and receive all the parts you need for start-up and the first year of maintenance, along with an extended pump warranty.

Check Stock

YSTOOL Cylinder Leak Down Tester Automotive Kit Gasoline Engine Compression Dual Gauge Leakdown Detector Tool Set for Pressure Check & Leakage Rate Test with Extension Rod Red

Convenient dual gauge design allows the compression gauge tool to test the pressure and leak rate of the cylinder under test at the same time. Ranging from 0-100 psi / 0-7 bar and 0-100%(Accuracy: ±0.5%), easy to read 3-inch gauges would spend less time on readings. Leakdown gauge tool hooks up to air compressor(prepare by yourself) can help to detect common engine faults such as worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets..
Gauge manifold assembly also equipped with 18" rubber hose, AR2000 pressure regulating valve, American type air plug and aluminum manifold body. Valve knob is made of alloy and plastic, used for pressure adjustment of the inputed air from the air compressor. Pull out for use, and push back to lock. This leak down compression tester & cylinder leakage test kit fits for most gasoline engines with spark plugs(within 20mm)..
Constructed with aluminum and rubber, straight / angled type universal push-on connectors don't need to be threaded into spark plug wells and applicable to almost all petrol engines, and M14 aluminum extension rod can be installed on long / short hose(41-3/4".
11-1/2") end to increase distance and facilitate operation. Adapter sizes: M14*1.25, M18*1.5, M10*1, M12*1.....

Check Stock

Cordless Airbrush Kit with Compressor, Portable Air Brushes for Painting 32PSI Dual Action Handheld Mini Airbrush Compressor 0.3mm Tip for Model, Nail, Tattoo, Cake Decorating, Rechargeable

...% compared with similar airbrushes on the market, it is higher up to 32PSI and the air flow reaches 7-9L, others are only 12-15PSI, 6L. The nozzle of this airbrush kit is only 0.3mm, so it can be used for extra fine detail spray, overall spray or for 2" wide background spray. It is the best choice cordless airbrush compressor.
【Two Connection Modes & New Optimized Circuit】A braided air hose is provided in our airbrush cordless. Except connecting our portable air pump with the cordless airbrush compressor directly, you can also connect our airbrush machine through the air hose.Our portable airbrush kit has been tested repeatedly, which not only optimizes the line, but also improves the service time of the air pump. The handheld airbrush kit pump design is curved and ergonomically designed to increase hand-held comfort..
【Dual-Action portable airbrush compressor】Air brush kit with air compressor comes with a double-action airbrush, it can not only control the fluid by the end part of of the rechargeable airbrush kit but also the pigment volume and air by the trigger on the air brushes for painting. this wireless air brushes for painting does not need a switch, just press the trigger to work, air will be sprayed, move the trigger back, the liquid ....

Check Stock

150DB Super Loud Train Horns kit for Trucks, 4 Air Horn Trumpet for Car Truck Train Van Boat, with 120 PSI 12V Compressor and Gauge (Dark Black)

Compressor Size: 38 x 18 x 16 cm/ 15 x 7.1 x 6.3 inch.
Loud and Powerful - The 4 Trumpet Vehicle Air Horn Blares Out a Loud and Powerful Warning. The Trumpet Air Horn Compressor Kit will produce a powerful 150DB sound.
All In One - This kit includes a compressor that has a 1.59 gallon tank and pumps up to 120 psi. When the pressure drops to 90 psi, the compressor will kick on and pump back up to 120psi. And comes with 4 vibration pads to install under each leg when mounted, a 30 amp fuse, a petcock style tank moisture drain, and 3'ft of 3/8 inch air hose for the air horn hook-up that is to be used with the push lock fitting on the side of the air tank connecting to the push lock fitting on the air horn.
Suitable For - Equipped with a safety protection, which means if the compressor goes above 176 degree F it will automatically shut off and will start back up when it gets back down to 158 degree F,The Horns are Commonly Installed on Cars, Trucks, Vans,Tractors,Trains, Camper, RV’s, Off Road Vehicles etc. However it is also Extremely Suitable for Motorcycles or Boats.
Fast Delivery - Our products are all in US warehouse, you can get it in 3-8 days..

Check Stock

Hhobake 12V 150db Air Horn with Air Compressor ,18 Inches Trains Horns for Vehicles, Car Truck RV Van SUV Motorcycle Off Road Boat

【LOUD AND POWERFUL】The train horn blares out a loud and powerful warning. It can produce sound as loud as 150DB. The train trumpet offers a louder, more complex and pleasing sound Ideal for almost any weather condition, improve the safety of your travel..
【HIGH QUALITY】-Newly upgraded compressor Equipped with a safety protection, will automatically shut off if the compressor goes above 176°F, and start back up when it gets back down to 158°F. The air horn is metal chrome plated material to ensure maximum strength and durability for long lasting usage.
It can work in a variety of temperature environments, no matter wherever you are..
【120 PSI COMPRESSOR】 - This kit includes a compressor that has a 1.59-gallon tank and pumps up to 120PSI. When the pressure drops to 90 psi, the compressor will kick on and pump back up to 120PSI. And comes with 2 vibration pads to install under each leg when mounted, a 30 amp fuse, a petcock style tank moisture drain, and 3'ft of 3/8" air hose for the air horn hook-up that is to be used with the push lock fitting on the side of the air tank connecting to the push lock fitting on the air horn..
【EASY TO INSTALLAT】It’s super easy to install!First,you fix the motor to a certain position on the car with....

Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

Each time your compressor runs, the moisture in the air condenses in the tank. This moisture must be drained daily from the tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..

Check Stock

GAS Air Compressor Pilot check valve unloader valve combo 145-175 NG7

【Versatile】This 3-Port Brass Female Threaded Air Compressor Check Valve excellent replacement for the old or broken check valve of your air compressor.
【Easy to install】Easy to install with the thread connecting ends, the three male thread connectors are respectively for tube connecting, air pressure tank and compressor piston pump.
【Package Content】 1 x Air Compressor Check Valve.
10mm Female Thread Tube Connector Air Compressor Check Valve, Male Thread : 16mm Hex Head Size : 18mm.
【After-sale Service】Each Compressor Check Valve is quality checked, we provide 30-day money back service or exchange for customers, just feel Free to contact us if you have any problem with the product, we will solve for you within 12 Hours.

Check Stock

Two Hole Pins, 1/2 in - 1 15/16 in, Large Threaded (2 Pack)

32Pcs Rotary tool mini cutting discs sets include 6pcs 22/ 25/ 32/ 35/ 44/ 50/mm woodworking thin cutting wheel +10pcs black mesh 32mm resin cutting wheel +10pcs 22mm emery cutting wheel +30pcs 22mm red polishing wheel + 1pc 1/8" connecting rod + 1pc 1/4 "connecting rod + 4pc 3mm connecting rod.
Mini saw blades made of high-hardness steel, hard texture, wear-resistant and heat-resistant, surface-plated emery, fine and uniform particles, rotary tool cutting disc can be used to polish or cut the surface of objects, high cutting efficiency and durability.003cbr/003e.
Rotary cut-off wheel kit has 6 assorted cutting discs set for different needs, HSS mini saw blades for wood and plastic / Diamond cutting wheels for stone / Resin cutting wheels for metal..
The cut-off wheels set + is suitable for all kinds of metal, wood, drywall, plastic, stone, ceramic, glass, hard alloy, the treasure jade stone processing and more / Ideal for cutting, grooving and trimming.003cbr/003e.
Compatibility: Shank cutting disc mandrels fit for most power die grinders or rotary tools & air tools.003cbr/003e.

Check Stock

imyyds Airbrush Kit with Compressor, 32PSI High Pressure Cordless Airbrush Gun, Portable Dual Action Airbrush Compressor Set, Handheld Mini Rechargeable Air Brushes for Painting, Model, Nail, Makeup

【32 PSI Highest Pressure】 The blocking pressure of our airbrush compressor is the highest in the handheld airbrush field which can be up to 32 PSI while others are only around 18-22 PSI. So it will be easier for you to spray some heavy paint or foundation. It's a good choice of air brushes for painting..
【Dual-Action Function】 Our portable airbrush comes with a double action trigger. We build an air valve in our airbrush. You can control paint and airflow separately with the trigger. When press the trigger down, compressor will turn on automatically and airflow will come out, then paint will come out when pull the trigger back. It will stop working automatically after releasing the trigger. This will make you can have a 30% longer working time compared with common rechargeable airbrushes kit..
【Two Connection Modes】 A braided air hose is provided in our cordless airbrush kit. Except connecting our portable compressor with the double action airbrush directly, you can also connect our compressor with the airbrush through the air hose. You will enjoy the great convenience when you are working..
【Wide Application】 The airbrush kit with compressor is suitable for beginners as well as for professional artists since its great performance for a ....

Check Stock

Craftsman 18-pc. Air Accessory Kit (CMXZTSG1004NB)

Variety: 18-piece air compressor accessory kit can be used for a variety of applications.
Includes: blow gun, tire gauge, dual-chuck tire inflator, rubber tip, thread seal tape, sports ball inflation needle, tapered nozzle, 2 - 1/4-inch female brass quick-connect couplers, 2 - female brass quick-connect plugs, 2 - 1/4-inch male brass quick-connect plugs, 2 - 1/4-inch male adapters, 1-4-inch female adapter, safety nozzle, and zippered storage bag.
Applications: Attachments included for inflating tires, sport balls and air mattresses.
connecting compressor to air hoses and air tools.
Storage bag keeps everything neat and organized in one place.
Specifications: standard 1/4-inch NPT male or female threads.

Check Stock

Craftsman 20-pc Air Accessory Kit (CMXZTSG1139NB)

Starter Kit: includes essential accessories needed to equip a new air compressor.
Applications: Attachments included for inflating tires, sport balls and air mattresses.
connecting compressor to air hoses and air tools.
Recoil hose connects to all included accessories with included quick-connect fittings.
Specifications: standard 1/4-inch NPT male or female threads.
Includes: recoil air hose, 2 - sport ball inflation needles, blow gun, safety nozzle, rubber nozzle, tapered nozzle, blow gun nozzle adapter, 2 - 1/4-in female brass quick-connect couplers, 3 - male steel quick-connect plugs, 2 - female steel quick-connect plugs, dual-chuck tire inflator, 1/4-in male adapter, 1/4-in female adapter, tire pressure gauge, and thread sealant tape.

Check Stock

4-Jaw Self-Centering Chuck Set, Z011 Four Jaw Mini Lathe Chucks w/ Connecting Rod & Wrench, Mini Power Lathe Machine Replacement Parts Accessories (Type C)

【3 Jaw or 4 Jaw Self-Centering Chuck Set for Mini Lathe】- Type B comes with 1 x Connecting Rod + 1 x Three Jaw Chuck + 2 pcs x Short Sticks.
Type C - 1 x Connecting Rod + 1 x Four Jaw Chuck + 1 x Wrench. This chuck connecting rod is suitable for Z011 Three Jaw or Four Jaw Woodworking Mini Lathe Chuck..
【Mini Lathe Chuck & Connecting Rod Replacement】- You can use it to replace the old or brocken one. The clamping range of this chuck is between 1.8-56mm, which is suitable for clamping a variety of industrial parts..
【Compact Size, Easy to Use】- Mini Lathe Chuck diameter about 48mm, Outer diameter about 12 mm-65 mm, Inner diameter about 1,8mm-56mm.
2. Connecting Rod size about 5.2cm x 6mm/2.05x0.24inch (LxD), Connecting Thread about M12x1mm. Perfect for mini metal and wood lathes..
【Stainless Steel Chuck Connecting Rod】- The Connecting Rod is made of High carbon steel material, anticorrosion, not easy to rust, durable and sturdy, ensure it has high hardness and can be reused..
【Practical Power Lathe Accessories】- Our chuck connecting rod is stable and has great performance while using, it is the ideal choose for you. High accurate connecting rod so that they can better fit with the Mini Lathe Machine Parts..

Check Stock