Top Cold Work Steels Reviews

Forney 30705 E7018 Welding Rod, 3/32-Inch, 5-Pound

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
  • Not recommended for use with low open circuit-Voltage OCV power sources.
  • Excellent for tack welds and out of position welding.
  • Ideal for general fabrication of cold roll steels.
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

The Edgemaker Knife Sharpener Pro 331- Perfect for Sharpening & Honing any Blade, Durable, Safe & Easy to Use- Orange

  • EDGEMAKER PROFESSIONAL SHARPENING TOOL- 331 allows you to both hone and sharpen the toughest of knives. This hand held sharpener works on wavy and serrated knives too.
  • TOUCH UP YOUR KNIFE BLADES QUICKLY AND EASILY IN ONE PORTABLE TOOL, the Edgemaker Pro hones and sharpens blades in less than one minute, performs like Butcher’s Steel leaving behind a smooth strong blade. Bring your dull blades back to life!.
  • HOW THEY WORK- All Edgemaker Tools work the same way. Simply draw the knife through the crossed steels with mild pressure. Read all Safety information before use.
  • SAFE, DURABLE & LONG LASTING- including an unbreakable high impact plastic handle. Steels can be pulled out and rotated to provide new sharpening surface for years of use. Simply place sharpener in hot water for one minute to expand plastic, pull steels, rotate, and then reinsert.
  • SAFETY FIRST- read all directions on the back of the packaging, including best practices, and step by step instructions on how to get the best results.
Check Stock

HORL 2 Walnut Rolling Knife Sharpener Engineered in Germany for Straight Edge with Industry Diamonds for Steel of any hardness and Magnetic Angle Technology with 15 & 20 Degrees

  • The HORL2 sharpener has the flexibility to satisfy individual requirements in knife sharpening with interchangeable grinding discs and a Magnetic Angle Support with a 15° angle for a fine edge and a 20° angle for a robust blade..
  • The HORL2 sharpening system combines diamond and ceramic discs to sharpen knives of any hardness, including European kitchen knives, hard or soft steel, stainless and rust-resistant steels, and outdoor knives. The industrial diamonds used are the most durable and efficient abrasives..
  • Achieve a sharp, long-lasting edge on your knives with the 20° grinding angle, perfect for robust cutting tasks in the kitchen and beyond..
  • Create a finely honed, razor-sharp edge on your knives with the extra fine 15° grinding angle, ideal for fine cutting work such as sushi, sashimi, Damascus knives, and particularly hard steels with a high carbon content..
Check Stock

BucknBear Custom Handmade 1095 Damascus Fixed Blade Letter Opener File Work on Spine

  • An exquisite letter opener for the collector. The high performance Leopard Damascus steel is forged from 1095 15n20 Damascus with HRC of 58-60.
  • This extremely hard material is hand forged with tool steels and ball bearing steels to form 300 layers, which, through a special etching procedure....
  • The dynamic recurved tanto style blade and the decorative file work on the back side mark the high standard of this extraordinary letter opener..
Check Stock

Ultra Sharp XL Double-Sided Diamond Sharpening Stone | Coarse 400 and Extra Fine 1000 Grit Diamond Sharpener | 8 x 2.5 in.| Durable Non-Slip Base

  • High Quality Monocrystalline Diamonds - Diamonds are electroplated onto a solid steel plate. This process ensures the stones stay flat and never need to be lapped like other stones. No adhesives or plastic parts are used resulting in greater durability..
  • Sharpens Faster - The 400# grit side removes metal very quickly while the 1000# grit produces a razor sharp edge. The large 8" x 2.5" size sharpens even the biggest chef’s knife with ease. The user only needs to apply light pressure and let the diamonds do the work..
  • Sharpens Any Steel – Sharpens high carbon steels, hardened stainless steel, all tool steels, and even the new super steels. It also sharpens ceramic kitchen knives with no problem..
  • Unique Diamond Pattern - Eliminates the tendency to clog and keeps the sharpening surface clean and clear of metal shavings..
  • Adjustable Stone Holder - Keeps the stone firmly in place while sharpening and provides the knuckle clearance needed to hold a consistent angle..
Check Stock

JET Bi-Metal Bandsaw Blade, 3/4\ x .035\ x 93\ x 6-10VT (414304)

  • REPLACEMENT BLADE FOR JET 7" x 12" HORIZONTAL BANDSAWS.
  • COMPATIBILITY: Fits HVBS-7MW, J-3410, HVBS-710G/S, and HBS-812G..
  • VERSATILE CUTTING: Bi-Metal bandsaw blades are great for metal cutting (i.e., carbon steels, light alloy steels, mold steels, and tool steels)..
Check Stock

Professional Knife Steel Magnetized for Safety Our Honing Rod Has an Oval Handle for a Firm Grip Honing Steel Built For Daily Use Perfect for Chefs and Home Cooks! 10 3 Stripe

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also....
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was....
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This....
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth....
Check Stock

Professional Knife Steel Magnetized for Safety Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use Perfect for Chefs and Home Cooks Alike! 10 Luxury

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also....
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was....
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This....
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth....
Check Stock

Professional Knife Steel Magnetized for Safety Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use Perfect for Chefs and Home Cooks Alike! 12 3 Stripe

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also....
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was....
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This....
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth....
Check Stock

Professional Knife Steel Magnetized for Safety. Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use, Perfect for Chefs and Home Cooks Alike! (10', 3 Dot)

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also cause tiny metal particles from your blade to become airborne. Our honing rods are magnetized to prevent those particles from being inhaled or landing on nearby food..
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was meticulously chosen. You won’t find cheap plastic handles or soft, inexpensive steel. When you hold it, the weight immediately reveals how solid the construction is, and the design adds class to any kitchen..
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This is contrary to knife sharpening steels or wet stone sharpeners, which should be used sparingly. (More details in product description.).
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth to remove the metal particles. For....
Check Stock

ACCUCUT I2DMS 2 Flute 3/8 Carbide End Mill Multi-Function for Deburring Spotting Chamfering & Side Milling 90 Degree bits AlTiN Coating

  • General Usage: Applicable with copper, copper alloys, alumiumn and alumiumn alloy, woodworking, cast iron, steels, carbon steels, alloy steels and stainless steel materials. Best use for materials HRC less than 40..
  • Solide Carbide: The material is European origin ultra fine grain carbide. The carbide rod we choose is made with the finest tungsten carbide powder and cobalt, using the best ratio to achieve the most ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible..
  • AlTiN Coating: It is a strong coating that's coated at temperatures between 450°C to 475°C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced..
  • Versatile Design: This end mill is designed for multiple purposes, such as chamfering, spotting, deburring and side milling. The chamfer degree is 45 per side..
  • 35° Helix: 2 flute and 35 degree helix design is ideal for roughing application because of its gr....
Check Stock

SPEED TIGER ITBTA Carbide Tapered End Mill- CNC Carving Bits, Ball Tip R0.5, 1/4\Shank 3\OVL for Wood/Alloy Steels/Hardened Steels-Made in Taiwan

  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Tip Radius: 0.5mm, Cutting Length: 1-1/4.
Check Stock

SPEED TIGER ICSM Chamfer End Mill - CNC Carving Bits, V Groove, 60 Degree, 1/4\Shank 2\OVL for Wood/Alloy Steels/Hardened Steels-Made in Taiwan(1 Piece, 60 Degree)

  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, MDF, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Ideal for Chamfering, Carving V Groove, Centering.
Check Stock