Top Coil Roofing Nail Reviews

3PLUS HCN45SP 11 Gauge 15 Degree 3/4\ to 1-3/4\ Coil Roofing Nailer

  • Drives 3/4-Inch to 1-3/4-Inch full head coil roofing nails.
  • Adjustable shingle guide for quick shingle spacing.
  • Integrated side skid pads prevent the tool from sliding off roof when placed on its side.
  • High-capacity magazine holds up to 120 coil nails at a time.
  • Tool free adjustable depth of drive for consistent and controllable nail fit.
  • Interchangeable trigger for single shot or bumper fire function..
Check Stock

Simpson Strong-Tie S11A175RNBP 1-3/4 x .120 304SS Ring-Shank Roof Nails 480ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-3/4-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Simpson Strong-Tie S11A150RNBP 1-1/2\ x .120 304SS Ring-Shank Roofing Nails 600ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/2-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Simpson Strong-Tie S11A125RNBP 1-1/4 x .120 304SS Ring-Shank Coil Roof Nails 720ct

  • 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
  • 1-1/4-Inch by 0.120 stainless steel Coil Roofing Nails.
  • Fits all standard 15-Degree coil roofing nailers.
Check Stock

Eagleggo Parts EP 876-174 Aftermarket Piston O-Ring for Hitachi NV45AB2, N5008AC, NT65A2, NT50A Nailers, Hitachi Replaces Part 876-174, 876174 Piston O-Rings - 10pcs/Pack

  • COMPATIBLE WITH: Fits Hitachi 876-174, 876174 Piston O-Rings..
  • This 876-174 o-ring is compatible with Hitachi N5010A, N5008AC / AC2 / ACP, NV45AB2, NT65A2, NT50A Nailers.
  • COMPATIBLE WITH: Fits Hitachi NT65A3 16-Gauge Finish Nailer NV45AB2 Side Load Coil Roofing Nailer NV45AB2(S) Bottom Load Coil Roofing Nailer NV45AE 1-3/4" Side Load Coil Roofing Nailer NV50A1 Light-Duty Coil Utility Nailer NV50AA Light-Duty Coil Utility Nailer N5008ACP 7/16" 1" - 2" x 16 Gauge Standard Crown Stapler N5010A 1/2" Standard Crown Stapler N5021A 15/16" Wide Crown Stapler N5024A 1" Wide Crown Stapler.
  • COMPATIBLE WITH: Fits Hitachi NV50AP2 Full Round Head, Coil, Wire Collation Pasti-Tacker Plus N3824A .5"-1.5" Wide Crown Stapler 16Ga N5008A1 Stapler N5008AC 2" 16Ga 1"-2"Standard Crown Construction Stapler NH451 "T" Nailer NT50A 18Ga Brad Nailer NT65A 16 Gage Brad Nailer NT65A2 2-1/2" 16Ga Finish Nailer NV45AA Heavy Duty Coil Nailer NV45AB 1-3/4" Heavy Duty, Roofing Coil Nailer VH501 Nailer N5008AC2 Stapler N5024A2 Stapler.
Check Stock

AeroPro CN45N Professional Roofing Nailer 3/4-Inch to 1-3/4-Inch

  • Professional grade roofing nail gun designed with moving cylinder engine for low recoil.
  • Selective actuation switch (sequential or bump).
  • Heat treated aluminum hosing designed for extra heavy duty application.
  • Tool-free precise adjustable drive depth.
  • Single-action side loading magazine with capacity up to 120 coil nails.
Check Stock

Freeman P4FNCB Pneumatic Finishing Stapler and Nailer 4-Piece Combo Kit with Canvas Bag and Fasteners, Black with Orange

  • 877-323 Piston Driver: Aluminum is crimped into the unilok grooves of the shaft to prevent unscrewing. Hardened steel lock tite and micro-mechanically locked piston driver interface. never to unscrew.Hitachi cylinder ring.
  • Suitable for NR83A NR83A2 NR83A3 NR83A3S.partes para pistola hitachi roofing framing placa de cilindro nr832 nr65ak2 nv45ab2.hitachi nail gun parts original.
  • Compatible with: Hitachi: NV65AC Coil Pallet Nailer, NV50A1 Light-Duty Coil Utility Nailer, NV50AP2 Full Round Head, Coil, Wire Collation Pasti-Tacker Plus, NV65AA Nailer.
Check Stock

Grip-Rite 1-1/4-Inch 15? Electro-GALVANIZED Coil Roofing Nails Smooth Shank 600 nails per tub

  • For best results use Grip-Rite GRTCR175 15 degree coil roof nailer.
  • 1-1/4" x .120" x 3/8" Diameter Thin Flat Head, Coil Roofing Nails.
  • Clear, Resealable, Reusable, Stackable Plastic Tub. GREAT for Do-It-Yourself Projects.
  • Use with Grip-Rite GRTCR175 Coil Roofing Nailer.
Check Stock

National Nail 135055 250CT 1-Inch Plastic Cap Nail

  • Deformed ring shank for greater holding power electro galvanized to enhance corrosion resistance. Conforms to surfaces..
  • All hand driven caps are packaged as integral nail-cap units Cap nails round plastic burron cap ring shank lgth 1 inch count=250..
  • Flexible round head conforms to surface making it difficult for water to get under the cap. use to secure roofing felt, sheathing, building papers, etc..
  • Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe. Flexible plastic head..
  • Flexible round head conforms to surface making it difficult for water to get under the cap. Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe..
Check Stock

877-323 878-303 Driver, Bumper, Ribbon Spring, Cylinder Ring & Gasket Service Kit for Hitachi NR83A/A2 NR83A3 NR83A2 NR83A5 NR83A2(S) DBM83-04 Guns …

  • Compatible with: Hitachi: NV65AC Coil Pallet Nailer, NV50A1 Light-Duty Coil Utility Nailer, NV50AP2 Full Round Head, Coil, Wire Collation Pasti-Tacker Plus, NV65AA Nailer,Hitachi cylinder ring.hitachi nail gun parts original .partes para pistola hitachi roofing framing placa de cilindro nr832 nr65ak2 nv45ab2..
  • Suitable for NR83A5 NR83A NR83A2 NR83A3 NR83A3S,NR83 and NV83 Guns..
  • Buy with Confidence - HLTIT parts always come with a 1 year warranty.
Check Stock

meite 15 Degree Round Head 1-1/2-Inch × .120 Wire Weld Collated Smooth Shank Electro Galvanized Coil Roofing Nails 2,880 PCS/Pack

  • 15 degree 1-1/2-Inch × .120 coil roofing nails.
  • For used in Bostitch RN46-1, Senco 455XP and other 15 degree coil roofing nailers.
Check Stock

meite 15 Degree Round Head 1-3/4-inch × .120\ Wire Weld Collated Smooth Shank Electro Galvanized Coil Roofing Nails (24 Rolls)

  • 15 degree 1-3/4-Inch × .120 coil roofing nails.
  • Smooth shank for easy driving, Electro Galvanized Finish.
  • 120 PCS* 24 Rolls= 2,880 PCS/ Small Pack.
  • 120 PCS* 60 Rolls= 7,200 PCS/ Whole Case.
  • For used in Bostitch RN46-1, Senco 455XP and other 15 degree coil roofing nailers.
Check Stock

BHTOP CN45N Roofing Nail Gun, 15 Degree Roofing Nailer, 3/4-Inch to 1-3/4-Inch Coil Nails, Air Nailer Coil 120-pcs Load Capacity

  • Professional Roofing Nail Gun- Professional grade roofing nail gun designed with moving cylinder engine for low recoil. Compatible with 15 degree wire collated roofing nails from 3/4" to 1-3/4".
  • 120 PCs Big loading capacity- Big loading capacity (120PCS) magazine will fasten a full bundle of shingles without reloading. Nails load from the side fast and easy.
  • Special Improvement-Magnetic nail holder aligns the nails when loading and ensures jam-free firing. Tool-less depth of drive adjustment for precision nailing/flush driving.
  • Widely Used -Ideal for a range of materials and applications which will meet all your different need in nailing. Perfect for applications such as roofing, asphalt and cedar shingles, wall sheathing, wood crate assembly, flooring underlayment, siding installation, and fences..
  • Special Humanized Design-Steel contact safety with dual carbide inserts for less wear. Soft grip for comfort and control. Delivers the power to consistently drive nails in the toughest applications..
Check Stock