Top Cobalt Spiral Point Taps Reviews

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-5/16-18-Made in USA (12 per pack)

Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.

Check Stock

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-3/8-16-Made in USA (12 per pack)

Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.

Check Stock

Drilling, Reaming, Tapping and Milling on the Drill Press (DVD)

High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.

Check Stock

amoolo 1/4\ Cobalt Drill Bit(10 Pcs), M35 HSS Metal Drill Bit Set for Hard Metal, Stainless Steel, Cast Iron

【10Pcs 1/4" Cobalt Drill Bits】10Pcs - 1/4”(Dia 6.35mm) x 2-3/4”(Flute Length 69.85mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization..
【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..

Check Stock

Champion Cutting Tool Brute Platinum XLT Tapper: Power Tapper, Tapping Tool

High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.

Check Stock

uxcell Thread Milling Tap 8-32 UNC, M42 HSS (High Speed Steel) Uncoated 3 Straight Flutes Machine Screw Threading Tap 2B Tolerance Grade

...stance, corrosion resistance and rust protection..
Applications: Suitable for processing through holes or shallow blind holes. Perfect for tapping stainless steel, copper, aluminum, etc.. Micro taps are mainly used for watches and clocks, and drilling materials in low hardness, such as wood, plastic and soft metals..
Cobalt High Speed Steel Tool: High speed steel (HSS) tool with cobalt has higher hardness and precision, better wear resistance and toughness, higher heat resistance. It is made by adding 5%-8% cobalt to the general-purpose high-speed steel..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Recommended feed rate: General steel: 6-15m/min.

Check Stock

AMOOLO 3/16' Cobalt Drill Bits(10Pcs), M35 High Speed Steel Jobber Length Twist Drill Bit Set for Hardened Metal, Stainless Steel, Cast Iron, Plastic and Wood

【10Pcs 3/16" Cobalt Drill Bits】10Pcs - 3/16”(Dia 4.76mm) x2-5/16”(Flute Length 58.74mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization..
【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..

Check Stock

AMOOLO 1/8' Cobalt Drill Bits(10Pcs), M35 High Speed Steel Jobber Length Twist Drill Bit Set for Hardened Metal, Stainless Steel, Cast Iron, Plastic and Wood

【10Pcs 1/8" Cobalt Drill Bits】10Pcs - 1/8”(Dia 3.18mm) x1-5/8”(Flute Length 41.28mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization..
【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..

Check Stock

HARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..

Check Stock

VALYRIANTOOL 1/8″ Cobalt Drill Bits(20PCS), M35 HSSCO High Speed Steel Double Ends Stubby Body Twist Drill Bit Set for Hardened Metal, Stainless Steel, Cast Iron, Plastic and Wood

【20PCS 1/8″ Cobalt Drill Bits】20PCS – 1/8″(Drilling Diameter) x5/8″(Flute Length)x2″(Overall Length) Metal Drill Bits. This drill bit fits the majority of power drill currently on the market..
【M35 Cobalt High Speed Steel】Industry grade M35 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. Pay attention to speed, pressure and heat control during drilling..
【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..

Check Stock

Michigan Drill 212C Series Cobalt Steel Extra-Long Length Drill Bit, Gold Oxide Finish, Round Shank, Spiral Flute, 135 Degrees Split Point, 1/4\ Size, 12\ Length (Pack of 1)

Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
performance is similar to uncoated tools.
Round shanks allow use with a wide variety of toolholding systems.
When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
135 degrees split point for nonslip starting on hard materials.

Check Stock

Drill America TSD Series M42 Cobalt Steel Short Length Drill Bit, Gold Oxide Finish, Threaded Shank, Spiral Flute, 135 Degrees Split Point, 1/8\ Size (Pack of 25)

Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools.
performance is similar to uncoated tools.
Threaded shank is for use with threaded-spindle tools, often used in aerospace and automotive applications.
When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Featured with 135 degrees heavy duty split point and surface treated for drilling hard, tough, high tensile strength materials.

Check Stock

Wolfride 9pcs Titanium Spiral Flute Tap Set Metric Machine Tap Set M2 M2.5 M3 M4 M5 M6 M8 M10 M12

Made from HSS6542, coated with titanium, high hardness and rust resistance, long service life..
Tap Size: M2*0.4, M2.5*0.45, M3*0.5, M4*0.7, M5*0.8, M6*1, M8*1.25, M10*1.5, M12*1.75..
Spiral flutes, good chip removal effect, can tap to the bottom of the blind hole. M2-M6 pointed head, M8-M12 flat head..
Can be used for processing iron, aluminum and other materials. Like stainless steel, cast iron and other difficult to machine materials, please choose cobalt taps..
Used on drilling machines, tapping machines, CNC and milling machines, not for hand electric drill..

Check Stock