Top Ticn Coated Spiral Point Taps Reviews

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-5/16-18-Made in USA (12 per pack)

Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.

Check Stock

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-3/8-16-Made in USA (12 per pack)

Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.

Check Stock

Drilling, Reaming, Tapping and Milling on the Drill Press (DVD)

High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.

Check Stock

Champion Cutting Tool Brute Platinum XLT Tapper: Power Tapper, Tapping Tool

High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.

Check Stock

CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8

Product Name: CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8.
✔ Type Size: M3: 3 mm * 0.5 , M4: 4 mm * 0.7 , M5: 5 mm * 0.8 , M6: 6 mm * 1 , M8: 8mm * 1.25.
✔ Material: HSS 6542 Titanium coating, cutting will not be left. Have good machinability. High hardness, fast cutting, wear high temperature.
✔ Spiral groove is reduced to remove crumbs, not easily broken tap. Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and Sticky materials processing.
✔Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum, hardwood, plastic.

Check Stock

6Pcs 2-in1 Combination Drill and Tap Set TOPINCN Titanium Coated HSS Metric Hex Shank Screw Taps Tool Set

¡¾HIGH QUALITY¡¿ - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
¡¾USE FOR TAPPING VARIOUS THREADS¡¿- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
¡¾SPIRAL FLUTES¡¿ - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
¡¾SMOOTH TAPPING¡¿ - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.

Check Stock

ISCAR DGR2202C-6D IC328 Carbide Parting Inserts Cutter Tools Cutting Holder Grooving Inserts CNC

A thin PVD coated TiCN layer on a tough substrate, for milling, parting, and grooving mainly steel and stainless steel at low to medium cutting speeds especially in unstable machining conditions.
Grade or Coating Type: PVD / Coating Layers: TiCN.
ISO Range - P/M/K(P25-P40)(M30-M40) / ISO Range - N/S/H (S20-S30).
Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.

Check Stock

uxcell M4 x 0.7 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs

Tap Size: M4 x 0.7 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life..
Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..

Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..

Check Stock

6PCS Combination Drill and Tap Bits, Metric Thread M3-M10 HSS Drill Bit Set 1/4” Hex Shank Screw Tapping Tool for Tapping and Lathe (Titanium Plating)

【6 Different Sizes】 6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements, can use for tapping various threads.
【Designed with Drilling Function】 They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
【Spiral Flutes Design】 These taps are designed with spiral flutes and the chip clearing process would be better.
【High Hardness & Rust Resistance】 These taps are made by high speed steel and surface finished by nitriding for high hardness and rust resistance.
【Widely Application】 Suitable for drilling and tapping on wood, plank, plastic, soft metal like aluminum, iron, etc. Ideal for hole drilling, tapping and deburring/countersinking applications.

Check Stock

uxcell Spiral Point Plug Threading Tap M6 x 0.75 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

PACKAGE INCLUDES: There are total 12pcs of taps in 2 different standards( Metric, Inch) that you can use for tapping various threads..
DRILLING & TAPPING: This hex shank drill bits can drill and tap at the same time, saving your time and effort..
HEX SHANK: This is a set of 12 pieces hex shank drill bits. Drill taps are designed with spiral flutes, which have better the chip clearing process..
MARKED CLEARLY: Their specifications are marked clearly on the surface from M3 to M10, so you can find the right drill tap bit you need quickly..
HIGH HARDNESS: The hex shank drill bits are made of high speed steel with titanium coated, the drill bits have high hardness, rustproof, solid and durable..

Check Stock

Tap Drill Bit Set, M3-M10 Tap Drill Bits Kit Titanium Coated HSS Drill and Tap Bits 1/4\ Hex Shank Metric

High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.

Check Stock

DEWALT Drill Tap, UNC, 3/8-Inch (DWADT3816)

★ 【HIGH QUALITY】 These valves are made of high speed steel and present a finish of surface by nitriding for a duration and a resistance is elevated to the rust for a prolonged service life..
★ 【DIFFERENT SIZES】 There are total of 6 pieces of taps in different sizes from M3 to M10 which you can use to tap various files.
★ 【SPECIAL DESIGN】 The taps are designed with spiral splines and the chip reteying process would be better.
★ 【FUNCTION】 These are taps with drilling function, used to drill hole and cut new threads at the same time, you will get smooth tapping experience with them.
★ 【WIDE APPLICATION】 These taps are used on a machine to perform tapping, usually more precise because human error is eliminated. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron and so on..

Check Stock