Top Cnc Control Board Reviews

SainSmart Genmtisu GRBL Controller Board for CNC Router Machine 3018-PROVer/ 3018-PROVer Mach3/ 3018-MX3

  • This controller board is compatible with Genmitsu CNC 3018-PROVer. If you have already had the Genmitsu CNC Router 3018-MX3/ 3018-PROVer Mach3, this controller board can help you turn Mach3 control to GRBL control..
  • Applicable Software: Grblcontrol (Candle), LaserGRBL, and other software that supports GRBL firmware, GRBL firmware version V1.1f..
  • USB interface communication, support 3-axis engraving, and laser module..
  • Input interface: X Y Z limit (HOME) interface, Z-axis tool return to zero, emergency stop switch interface, GRBL offline controller interface..
  • All control signals are isolated by optocoupler and have strong Anti-interference ability.
Check Stock

Genmitsu 3 Axis GRBL 1.1h 32-Bit CNC Controller Board for CNC Router Machine 3018-PROVer V2

  • This controller board is compatible with Genmitsu CNC 3018-PROVer V2 CNC Machine..
  • Applicable Software: Grblcontrol (Candle), LaserGRBL, and other software that supports GRBL firmware, GRBL firmware version V1.1h..
  • USB interface communication, support 3-axis engraving, and laser module..
  • Functional Input Interface: Includes X, Y, Z limit switches, Z-Axis tool setting touch probe, emergency stop switch, GRBL offline controller, MPG, 3 pin laser and air assistance pump..
  • All control signals are isolated by optocoupler and have strong Anti-interference ability. The outer ABS case could protect the control board well..
Check Stock

Cenoz Upgrade CNC 3018 Pro GRBL Control DIY CNC Machine,3 Axis PCB PVC Milling Engraving Machine,Wood Router Engraver XYZ Working Area 300x180x45mm (3018-PRO with extension rod)

  • The latest control board : in order to meet most customers needs ,we upgrade the cnc milling machine , provide new version control board ,latest GRBL 3 axis control ,more power ,more precise , include Integrated Driver Chip + Fixed Heat Sink +External Fan +Sturdy ..
  • Quick assembly Version : All components of this 3018 pro cnc engraving machine no need to be positioned, which greatly reduces the time of assembly . It takes only about 20 minutes to complete assembly..
  • Intelligent software: GRBL three-axis control board can be use on Win xp/Win7/Win8/Linux system ,reduce more operational problems .can engrave on plastics, soft aluminum, woods, acrylics, PVC, and PCB..
  • Offline control way : Support offline controller , manually adjust X, Y, Z-axis without connecting to the computer and download files ,not only just a unique gift for your lover, familyfriends ,but also satisfy your desire to create handicrafts perfectly ..
  • Please download the manual via this link: https://shimom.s3.us-east-2.amazonaws.com/Cenoz/cenoz+3018pro.rar , any question welcome to contacting our professional team , we promise to solve your any issue in 24 hours ..
Check Stock

MYSWEETY 2 in 1 5500mW CNC 3018Pro-M Engraver Machine, GRBL Control 3 Axis DIY CNC Router with 5.5W Module Kit, Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine with Offline Controller

  • ... plastic, PCB, PVC, acrylic(Only suitable for spindle milling cutter engraving). Can not work on metal, iron, glass, 201/304 stainless steel, jewelry, aluminum or silver..
  • Large Working Area- With an effective engraving area of 300 x 180 x 45 mm (11.8 x 7.1 x 1.8), the 3018pro-M can easily accommodate most projects. Control software: GRBL.
  • Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10..
  • New Control Board- Integrated driver chip + fixed heat sink + external fan + sturdy casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty. It come with the spindle motor and 5.5W module on Z axis. If you use the spindle, please remove the module..
  • Simple Assembly- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!.
Check Stock

Centroid 4 axis Acorn DIY CNC motion controller kit REV 4 with CNC software replaces MachMotion,WinCNC,Mach3,EMC2,KCAM4,Smooth Stepper

  • ♞【Upgrade Version CNC3018 Pro Max】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for....
  • Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 /....
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the....
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other....
  • ♞【GRBL Software】Our parcel include a 4G USB flash drive,it include the installation instructions,user manual and GRBL software.
Check Stock

RATTMMOTOR 3018 PRO CNC Wood Router Machine 3 Axis GRBL Control USB Port DIY Mini CNC Router Machine Kit Plastic Acrylic PVC PCB Wood Engraver Milling Carving Machine Working Area 30x18x4.5cm

  • 【Simple Assembly/Use】※ This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB flash drive of all the files. Please let us know if you need any help..
  • 【Update GRBL Board】※ The updated control board has added the functions of supporting emergency stop button and X/Y/Z axis limit, and the functions are more complete. Users can design and equip those DIY accessories suitable for this mini engraving machine according to their own needs. Equipped with a silent cooling fan, which can dissipate heat quickly during operation, with low noise and good quality. Also, the control board can automatically identify the offline controller, support PWM..
  • 【Applicable Engraving Material】※ CNC 3018 PRO machine can not only engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and so on, but also soft metal like copper, aluminum and the similar materials. Howerever, harder materials cannot be engraved such as glass, hard metal, jade, ect..
Check Stock

RATTMMOTOR CNC Controller Board 3 Axis GRBL USB Port CNC Router Engraving Machine Control Board for DIY Mini CNC Wood Router Machine CNC 1310, 1610 PRO, 3018 PTO, 3018 PRO-MAX

  • Current: 5A-6A；Support OS: Windows XP, Win7.
  • Power interface: 5.5-2.5mm DC interface；Software: Grblcontrol/Lasergrbl.
  • It is not recommended to update the software or firmware of the control board, otherwise the control board will be damage..
  • Do not support win10/win8/Mac OS system. The compatibility of the win10 system is very poor, the GRBL control board and the window10 system may not be compatible, and unknown (unsolvable) problems may occur. In order to ensure a good shopping experience for buyers, we have made a reminder on the product page that doesn't support win10 system..
  • Regarding the meaning of the control board ports, there are related descriptions on the back of the product..
  • About the idle ports that are not commonly used in the board, we recommend that the buyer ignore it, because if there is no certain CNC foundation, it is easy to destroy the board..
Check Stock

500W CNC Router Machine, CAMXTOOL 3020 CNC Machine for Metal Acrylic PCB PVC Wood Carving CNC Milling Machine with Large Working Area 11.80x7.90x2.87inch (300x200x73MM)

  • ... ♞【Easy Assembly Version CNC 3018 Pro】We have UPDATeD! You don't need to spend a lot of time assembling it! This new version already has the base installed, you just need to install the gantry part.
  • ♞【Latest Version Control Board】After repeated tests, we have upgraded some parts of the control board to make it work more stably. Integrated Driver Chip + Fixed Heat Sink + External Fan + Sturdy Casing + Add Emergency Stop Switch Port to extend the life of the control board, Self-contained short circuit protection, Not easy to damage.
  • ♞【Offline Controller】Great for beginners. Upgrade from 128MB to 1G Capacity. Main advantages: 1,can operate without connect the computer.
  • 2,Included SD card reader to write into the root directory G-code files or NC file.
  • Support Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle.
  • ♞【Wide Application】Suitable for carve wood, plastic, acrylic, PCB CCL, soft metal like copper and aluminum and other materials, but can not carve hard metal, jade and other very hard texture of the items....
Check Stock

Milling Machine Linear Scale, 170mm High Accuracy Linear Encoder for Milling Lathe Machine

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock

Milling Machine

  • 4040-XE CNC Router uses 300W spindle and NEMA23 stepper motors, which are more powerful and efficient. Max moving speed is 2000mm/min and spindle....
  • Control board, power supply, emergency stop, and wires are integrated into a newly design box, which is simple for operation, easy to clean and safe.....
  • It’s capable to engrave, cut and drill many different kinds of material such as wood, metal, MDF, acrylic, foam, resin, nylon, carbon fiber, PCB and....
  • Large engravable area of 15.75”x15.75”x2.56” (400x400x65mm). It’s capable to handle both small and large material. The CNC machine is based on....
  • Easy assembly. Main parts are pre-assembled, it only takes 15-30mins to fully assembly. Wires are labeled clearly for fast connection and bundled into....
Check Stock

BIGTREETECH SKR Mini E3 V2.0 New Upgrade Control Board 32-Bit with TMC2209 UART Driver 3D Printer Parts Cheetah for Creality Ender 3

  • ⭐【Main Control Chip Features】This SKR Mini E3 V2.0 motherboard uses the STM32F103RCT6 main control chip, and its flash memory size is 256K..
  • ⭐【CNC Fan】Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0....
  • ⭐【Hot-bed Mosfet】The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation..
  • ⭐【Upgrade Features】Support BLtouch, filament detection, power-off resume, automatic shutdown, etc ..
  • Increase the distance between the driving....
  • ⭐【After-sales Support】If you encounter any problems, please contact us via Amazon as soon as possible. We have professional technical....
Check Stock

CNC 3018 Pro Wood Router Kit 3 Axis USB DIY Mini Engraver Milling Engraving Machine Cutter Plastic Acrylic PCB PVC Carving GRBL Control 300x180x45mm

  • ♞【Upgrade Version 3018 Pro】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers.
  • The CNC3018 PRO machine is very easy to install,stable structure..
  • Type:USB Port mini desktop cnc router【Spindle】 775 spindle motor (12-36V) DC24V:10000r/min【Stepper Motor】Nema17 stepper motor,1.3A, phase resistance 2.1 ohms, torque 0.25N.m.
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module..
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material,also can work on soft metal like copper,brass,aluminum and other similar metal materials, but can not carve hard metal, jade or other very hard texture of the items..
  • ♞【GRBL Software】Our parcel include a 4G USB flash drive,it include the installation instructions,user manual and GRBL software.
  • ♞【System requirements】 Windows XP SP3,Win 7,Win 8,Win 10 (32/64 can be)....
Check Stock

Straight Shank Tool Holder, 45-46HRC Hardness 1-7mm Clamping Range 40Cr and Carbon Steel CNC Milling Extension Rod for Lathe Device(C16-ER11A-100L)

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock