Top Ac Control Board Reviews

DOMETIC 3314082000 Thermostat

  • Multi-Zone CCC Thermostat in White, Control board not included.
  • The Dometic Multi-Zone Comfort Control Center Thermostat can control your Dometic heating and cooling appliances. Weather you are camping in the middle of winter or driving in the hot and humid conditions of the summer, this Dometic Atwood Thermostat is perfect control.
Check Stock

HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger

  • This is a simple and practical passive relay module, which is very convenient to use. It can support both Normally Open and Normally Close..
  • Input control signal: AC/DC 5V, AC/DC 12V, AC/DC24V, AC/DC48V, AC 115V, AC 230V Selectable..
  • Output switch DPST 1NO 1NC(Double Pole Single Throw, 1x Normally Open and 1x Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch)..
  • Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
Check Stock

Mighty Mule / Linear / GTO 10 Watt Solar Gate Battery Charger -Works with All Mighty Mule Gate Openers, Compatible to FM123

  • The R4211 is a replacement control board for the FM500/FM502 & MM560/MM562 series swing gate openers.
  • UL 325 6th Edition Compliant that features Mighty Mule's exclusive Dual Sense Technology for additional protection & safety.
  • Can handle push and pull-to-open settings and dual gate operation and can direct power from a solar panel or from an AC transformer.
  • Is an ideal replacement control board if a previous board was burned out by a lightning strike, a power surge or if the previous board was burned out by reversed battery wiring.
  • Built to support all Mighty Mule accessories. Not compatible with the Mighty Mule FM200, MM260, FM350/352 and MM360 automatic gate openers.
Check Stock

GVM 2 Pack LED Video Lighting Kits with APP Control, Bi-Color Variable 2300K~6800K with Digital Display Brightness of 10~100% for Video Photography, CRI97+ TLCI97 Led Video Light Panel +Barndoor

  • Led video lighting kit with app control: LED Panel lighting kit, app control model, Color temperature is between 2300k-6800k and High brightness is between 10%-100%, Has a new addition of digital display screen, accurately displaying the parameters..
  • Adjustable light board: The Photography Lighting Kit is distributed and with an adjustable soft board, it’s very a helpful Studio Lighting Kit for portrait and video..
  • Ac/ DC power options: wireless operation with AC adapter (supplied) or Sony NP-F550 np-f970 Li-ion battery (not included).
  • Metal shell and u-shaped frame: featured with the durable aluminum alloy shell, The Lighting Kit has an excellent heat dissipation effect. With an adjustable U-shaped bracket, the Panel Lighting Kit can be put on the light stand or on the ground..
  • All GVM Photography Lighting Kit includes one year service and 1 Month free of replacement. Package Includes 2XLED video lights, 2x AC adapters, 2 x bracket-white diffusers, 2 x Power cables, 2 x light stands, and a handbag..
Check Stock

Line 6 M9 Stompbox Modeler Guitar Multi Effects Pedal,Black

  • Full control over the stompbox arrangement.
  • scenes back up to your computer via MIDI in/out. built-in tuner.
  • 28-second looper with dedicated footswitches for Record/Overdub, Play/Stop, Play Once, Undo/Redo, Half Speed and Reverse.
  • 1/4" mono/stereo inputs and outputs (true analog bypass or DSP bypass).
  • backup and MIDI control system compatibility.
  • Heavy-duty, all-metal chassis and footswitches were built for on-stage abuse.
Check Stock

Stanbroil BBQ 120V 60Hz Square Thermostat Controller Board with LCD Display Module for Pit Boss P9 Wood Oven

  • COMPATIBLE WITH: Replacement For Part Numbers: AC03P9.
  • PB1100PS1-A003. Fits Pit Boss PB440D2/PB1150G/PB850G/PB550G/PB820/Pro 1100 grills..
  • DIMENSIONS: 8-1/2" x 2-3/4". AC120V/60Hz, Includes 1 x Thermostat Controller Board. Take full control of your wood oven with this Direct Igniter....
  • FEATURES: Easy use, with LCD Display. Helps control your temperatures, front panel cook control, Cool Down Cycle, for safe, succulent grilling..
  • CONTROL TEMPERATURES: High mode can be used for highest heat possible. High temperature resistance and long service life. It also has smoke mode and....
  • DUAL MEAT PROBES INTERFACE: Dual meat probes interface design so you do not lose your heat checking your meat's internal temperatures.(Meat Probes Not....
Check Stock

Eagle II 1/2 HP Residential Swing Gate Operator 14' & 400 lbs Gate Capacity FREE 2 Remotes, Receiver and Photo Eye Included

  • Eagle-ll Swing Gate Operator is designed for Residential Gates or Small Business that utilizes small gates. The Automatic Swing Gate Opener is powered by a ½ HP Motor making it ideal for gates up to 14’ feet or 400lbs weight capacity.
  • Installation - With the professional installer in mind, the Eagle-Il Swing Gate Motor Opener is designed with an AC Mini Diamond control board.
  • the most user-installer friendly control board in the industry that allows for Easy Installation..
  • Safety - The Home Driveway Swing Gate Operator is equipped with a Quick Release lever. The user will be able to open the gate manually using the release lever. Also included is a built-in lighting and surge protection..
  • Equipment - Built with a heavy duty ½ Horse Power continuous duty AC Motor, Gear reducers for silent and efficient operations. Features Open right/Open Left election, motor brake and auto Close timer.
  • Package includes – Swing Gate Operator, 2 Visor Wireless Remotes, 1 Long Range Receiver. We also include a 5-Year limited manufacture Warranty..
Check Stock

Microsoft Wireless Optical Desktop 1000 (PC & Mac)

  • Strong 1000-Watt PSU providing stable power source for ATX12V / EPS12 desktop computer with dedicated PCI-Express graphic card. ** Attention: DOES NOT support Bitcoin/Ethereum mining application.**.
  • High efficiency means less heat dissipation plus less electricity wasted: typical 85.77%, average 84.16% -- over 82 percent across all load level, meets and exceeds 80plus standard. Full range AC input Active PFC technology: 100- 240V auto-select..
  • Quad blue color LEDs turns on when the PSU is on. Smart fan controller with on-board thermostat dynamically control fan speed to ensure ultra quiet operation..
  • POWER CONNECTORS INCLUDED: 24pin (20+4) Main, 1 x 4+4 12V (supports standard 2x2 P4 or 2x4 8pin 12V board), 2 x 6+2 PCIe (for graphic card that requires 6pin and/or 8pin), (5) SATA, (2) Molex 4pin Peripheral, Floppy Drive.
  • Black casing with black braided sleeving on all cables. Long cables to support standard mid tower chassis or bottom-mount gamer case. UL certified 5-foot safety AC cord and black installation screws are included..
Check Stock

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Check Stock

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check Stock

Weewooday 15 Pieces 5V Relay Module 1- Channel Relay Control Boards with Optocoupler Isolation High and Low Level Trigger Expansion Board

  • Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
  • Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
  • The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
  • Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
  • All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
  • High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
  • Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.
Check Stock

ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32 Raspberry Pi

  • 5V 8-Channel Relay interface board, each one needs 70mA Driver Current.
  • Equiped with high-current relay, AC250V 10A.
  • Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection..
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
  • The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control。For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW.
Check Stock

VEVOR Automatic Opener 1400LBS with 2 Remote Controls Operator Hardware Kit for Security Move Speed 43ft Per Min Electric Rolling Driveway Slide Gate Motor

  • ♚[COMPATIBLE]~ Easy to install, compatible with other accessories, such as infrared sensors, solar panels, alarms and more..
  • ♚[CONVENIENT]~ Use the 4-Button Remotes to Open, Close, Stop Remote control, access to multiple remote controls, use of remote control, do not have....
  • ♚[HUMANIZED DESIGN]~ It works quietly, with a lower decibel than the face-to-face conversation.
  • it's powerful, easy to open metal doors, 15s quick....
  • ♚[DURABLE]~ This sliding driveway gate can work for many years (3 years, the control board is not bad, the door is not too heavy), what kind of....
Check Stock