Top Close Rough Brass Nipple Fittings Reviews

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Hilitchi Hydraulic Zerk Grease Fittings Assortment Kit with Grease Zerk Caps (SAE-174PCS)

  • 【✔】Made of Good Quality Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable. The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating..
  • 【✔】174Pcs Assortment kit SAE grease fittings. Sizes include: SAE standard, inch size,Straight 1/4”-28 (25pcs).
  • We include 60pcs grease fittings caps can prevent the grease fittings from corrosion and contaminants..
  • 【✔】GREAT USES: Our Straight & Angled Fittings are helpful to feed lubricant to your bearings and other mechanical devices without disassembly. Suitable for most automotive, motorcycle, truck, farm, and industrial applications..
  • 【✔】NICE ASSORTMENT KIT: 174-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box.
  • 【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions, please come to us, we would reply you within 12hours. We would solve all the problems to your satisfactio....
Check Stock

Terisass Bleed Screw M10 1.0mm Motorcycle Brake Master Cylinder Bleed Screw Aluminum Nipple Banjo Bolt with 2Pcs Washers & O-Ring Kit Universal(Black)

  • 【Why do you need it】:These fittings are extremely useful to help bleeding brakes which are problematic for air locks.Replacement bleed nipple for the front or rear brake lines..
  • 【Banjo Bolt Bleed Screw】M10x1.0mm Motorcycle Brake Braking Caliper Bleed Screw Nipple with Dust Cap.
  • 【Fitment】:Also be fitted to back of the master cylinders to bleed out trapped air. Easy installation, suitable for many motorcycle applications..
  • 【High Quality】：This bleed screw is made of high quality aluminum, anodized coloring for rust and corrosion resistance, not easy to deform, not easy to damage, rust and corrosion resistance, durable..
  • 【Excellent Perforamnce】:These fittings are extremely useful to help bleeding brakes which are problematic for air locks.Each component is precision-machined to exact tolerances for trouble-free.
Check Stock

Glarks 145-Pieces Metric M6 M8 M10 Brass Zerk Grease Nipple Fittings Assortment Kit - Straight, 90 Degree, 45 Degree Angled Zerks

  • ♣ Product Type: High quality brass zerk grease nipple fittings assortment kit..
  • ♣ Package Content: This set include commonly used zerks metric fittings M6x1x28pcs straight, M6x1x20pcs 90 degrees, M6x1x20pcs 45 degrees, M8x1x15pcs straight, M8x1x15pcs 90 degrees, M8x1x15pcs 45 degrees, M10x1x12pcs straight, M10x1x10pcs 90 degrees, M10x1x10pcs 45 degrees total 145pcs in a plastic box..
  • ♣ High Quality: They are made of good quality brass, with extra strength and rust-resistance, they are hardened to prevent wear, smooth surface for easy to install..
  • ♣ Great Grease Zerk Fitting: These straight, 90 degree, 45 degree angled zerks allows you to simply insert lubricant directly into the bearing without having to disassemble or replace the bearing, perfect for restoration and replacing missing or broken grease zerks on your machinery..
  • ♣ Application: These commonly used zerks very suitable for many most automotive, motorcycle, truck, farm, and industrial applications..
Check Stock

Dixon Valve & Coupling FM1515F Brass Fire Equipment, Hex Nipple, 1-1/2' NPT Female x 1-1/2' NST (NH) Male

  • Hex nipple for connecting two threaded pipes or fittings.
  • 1-1/2" NPT female connection and 1-1/2" NST male connection.
Check Stock

Anderson Metals - 38300-1625 38300 Lead Free Red Brass Pipe Fitting, Nipple, 1' x 1' NPT Male, 2-1/2' Length

  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

E-outstanding Inline Cord Switch On/Off Button Feed Cord Switch for Table Lamp Desk Light Bed Lamp, Transparent 6A 250V

  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
  • Antique Brass finish socket has optional side hole in bottom cap in case you cannot run wire through your lamp base..
  • Create a custom lamp in minutes -all parts included and instructions for assembly..
  • Includes 8 inch Antique Brass harp with base and finial cap knob, push thru socket, 8 foot cord and hardware. Threaded nipple is 1/8 IP and 1-1/2" long..
  • Cord set & fittings. UL Listed. 75 watt max household bulb recommended..
Check Stock

Creative Hobbies® ML93HA Antique Brass Finish Make-A-Lamp Kit with All Parts Needed and Instructions for DIY Lamp Design or Repair

  • Create a custom lamp with your own lamp base or re-wire a lamp with our new parts kit..
  • Antique Brass finish socket has optional side hole in bottom cap in case you cannot run wire through your lamp base..
  • Create a custom lamp in minutes -all parts included and instructions for assembly..
  • Includes 8 inch Antique Brass harp with base and finial cap knob, push thru socket, 8 foot cord and hardware. Threaded nipple is 1/8 IP and 1-1/2" long..
  • Cord set & fittings. UL Listed. 75 watt max household bulb recommended..
Check Stock

Tub Shower Faucet Set 5-Spray Rain Shower Head Pressure Balance Valve and Diverter Bathtub Spout, Shower System Combo, Matte Black (Rough in Valve Included)

  • Premium Material - Electroplated Matte Black tub and shower faucet combo set ( rough-in valve & trim kit include ), constructed by high quality brass, no burst or crack in extremely hot or cold environments, performs well with excellent appearance.
  • Steady Temperature - cUPC Certified Pressure Balance Cartridge keeps water temperature constant, brass valve body, standard 1/2" U.S. plumbing connections.
  • 5 Powerful Spray Options - 5-functions 6-inches top rainfall shower head to satisfy all of your showering needs, relieves all day long stress from work and life.
  • Quick Filling Bathtub - 5.3" tub spout length, high flow rate fills tubs quickly.
  • Package Includes - pressure balancing rough in shower valve, valve trim, 5-sprays shower head, shower arm, tub spout with diverter, complete mounting fittings..
Check Stock

Strongway Garden Hose Reel Cart - Holds 5/8in x 400ft Hose

  •  Easy-rolling 10in. flat-free tires and solid axles for rough terrain.
  •  Integrated basket to store accessories.
  •  Heavy-duty brass fittings and couplers.
Check Stock

Kegco Keg Tap Coupler, 1

  • The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
  • This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
  • Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
  • This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
  • Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.
Check Stock

Westbrass Sch. 40 PVC 27 in. Cable Drive Bath Waste, Matte Black, D50P27-62

  • 1-1/2 in. schedule 40 PVC cable driven bathtub trim kit includes brass rotary knob, standard pop-up stopper with strainer plate and Sch. 40 PVC fittings.
  • Rotate the round overflow cover to close the drain. Turn it in the opposite direction to open the drain.
  • All glue type fittings - tubes not included.
  • Fixed top elbow with cover mounting back plate.
Check Stock

Propane Regulator, High Pressure, Adjustable 0-60 lbs

  • MEGR-1122H-AAJ High Pressure 10 PSI First Stage Regulator (1/4" Inlet x 1/2" Outlet) 1,000,000 BTU Capacity.
  • MEGR-1652-CFF Low Pressure 11" Water Column Backmount 90 Degree Second Stage Regulator (1/2" Inlet x 3/4" Outlet) 1,000,000 BTU Capacity.
  • POL x 1/4" Pigtail to connect between the propane tank and the first stage high pressure regulator.
Check Stock