Top Fip Nipple Fittings Reviews

Terisass Bleed Screw M10 1.0mm Motorcycle Brake Master Cylinder Bleed Screw Aluminum Nipple Banjo Bolt with 2Pcs Washers & O-Ring Kit Universal(Black)

【Why do you need it】:These fittings are extremely useful to help bleeding brakes which are problematic for air locks.Replacement bleed nipple for the front or rear brake lines..
【Banjo Bolt Bleed Screw】M10x1.0mm Motorcycle Brake Braking Caliper Bleed Screw Nipple with Dust Cap.
【Fitment】:Also be fitted to back of the master cylinders to bleed out trapped air. Easy installation, suitable for many motorcycle applications..
【High Quality】：This bleed screw is made of high quality aluminum, anodized coloring for rust and corrosion resistance, not easy to deform, not easy to damage, rust and corrosion resistance, durable..
【Excellent Perforamnce】:These fittings are extremely useful to help bleeding brakes which are problematic for air locks.Each component is precision-machined to exact tolerances for trouble-free.

Check Stock

PROCURU 1/2" OD x 24" Long WeatherProof Stainless Steel Gas Flex Connector Kit with SafeGuard Coating for Dryers, Bbq Grills, Water Heaters

1/2" Outer diameter x 24" length (2 ft.) stainless steel gas connector with SafeGuard Coating for anti-corrosion and air-tight protection.
(3) Brass fittings included: 1/2" MIP (tapped 3/8" FIP) (2 pcs), and 3/4" MIP (tapped 1/2" FIP) (1 pc).
Also included: 4-Mil high-density PTFE sealant tape 1/2" x 520", gas leak detector, installation instructions.
Designed for gas dryer, water heater, bbq grills, and other natural and propane gas appliances.
100% leak tested and sealed, CSA certified for indoor and outdoor use for natural, LP, and LP-gas air mixtures.

Check Stock

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

...Thicker pipe diameter can transmission gas quickly..
「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appliance or at another location. Test for leaks only with leak test solution. Rinse with clean water after leak testing..

Check Stock

Dormont Safety-Shield Gas Appliance Connector Kit (0240892) 30C-3131KIT-48B - 5/8 In. OD (1/2 In. ID) 1/2 In. MIP X 1/2 In. MIP X 3/4 In. MIP X 48 In. Length Yellow Coated

Designed for: Ranges, Stoves, Furnaces or Boilers.
Included Adapters - 90-3031-(2) - 5/8 In.OD Flare X 1/2 In. MIP (Tapped 3/8 In. FIP) - 90-3041- (1) - 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP).
304 Stainless Steel flexible tubing with plated steel end fittings.

Check Stock

PROCURU 1 OD x 60 Long x 3/4 MIP x 3/4 FIP Gas Flex Line Connector Kit WeatheProof Max-Flow High Capacity Stainless Steel with SafeGuard Coating for Tankless Water Heater

1" Outer Diameter x 60" Length (5 ft.) Stainless steel flexible gas connector with SafeGuard Coating anti-corrosion and weatherproof protection.
(2) Brass fittings included: 3/4" male MIP (tapped 1/2" FIP), 3/4" female FIP.
4-Mil High density PTFE Sealant Tape 1/2" x 520", Gas leak detector solution, Installation Guide included.
Designed for tankless water heaters and other high-demand gas appliances.
100% leak tested and sealed, CSA certified for indoor and outdoor use for natural, LP, and LP-gas air mixtures.

Check Stock

EXCELFU Safety-Shield Gas Appliance Line Flexible Dryer Gas Hose Connector Kit - 5/8 In. OD (1/2 In. ID) 1/2 In. MIP X 1/2 In. MIP X 3/4 In. MIP X 48 In. Length Yellow Coated

Adapter Included 2 Pcs 5/8 In.OD Flare x 1/2 In. MIP (Tapped 3/8 In. FIP) and 2 Pcs 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP).
This gas appliance connector kit are designed for Ranges, Stoves, Furnaces or Boilers.
304 Stainless steel flexible tubing with plated steel end fittings capacity 106,000 BTU.
48 inch long stainless steel corrugated gas range and dryer connector kit are perfect for indoor or outdoor use.
This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.

Check Stock

Easyflex Yellow Coated Stainless Steel 3/4 MIP x 3/4 FIP Full Flow 1 OD Gas Flex Connector 18

Yellow coated polymer exterior & double corrugated for extra protection and flexibility.
Comes with MIP and FIP flare fittings with 3/4" full flow inner diameter.
Compatible with Brasscraft CSSB21 for high rating BTU.
CSA certified and ideal for indoor and outdoor use.
Application includes residential/commercial tank and tankless water heaters, boilers, fryers, stoves.

Check Stock

EZ-Fluid Plumbing 30" x 1/2" Fip x 3/8" Comp S.S Braided Flexible Water Hoses Connectors,Faucet Supply Line,Faucet Water Supply Hose Connector Lines For Bathroom,Kitchen,Outdoor Sink Faucets(1)

Stainless Steel Braided Supply Hose Line Faucet Connector Hoses.
EZ-Fluid Plumbing 30" x 1/2" Fip x 3/8" Comp S.S Braided Flexible Water Hoses Connectors,Faucet Supply Line,Faucet Water Supply Hose Connector Lines For Bathroom,Kitchen,Outdoor Sink Faucets.
EZ-FLUID Flexible Water Supply Hose Lines Connectors for Commerical or Residential Kitchen Sink,Bathroom,Indoor/outdoor Sink Faucets. And faucet water supply line extension available as well..
Stainless Steel Braided SS304 will deliver perfect corrosion protection for the supply line of the Kitchen,Bath Toilet,outdoor sink..
Plumbing Contactor Pack of 10 pcs 3/8" Compression x 1/2" Fip x 30" Long ，The 3/8" Female Compression hose attachment End will fits to 3/8" Male Comp. inlet on Angle Stop Water shut off Valve,or Any 3/8" Male Compression threaded Fittings.

Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..

Check Stock

Highcraft GUHDZD3436Q 36 Flexible Yellow Epoxy Coated Gas Line Connector with 1 O.D and 3/4 FIP x 3/4 MIP Fittings Stainless Steel

High BTU Gas Connector with 1" Outer Diameter.
36" Long with 3/4" FIP x 3/4" MIP Fittings.
Designed and Engineered for Safe, Optimal Flow Rate.
FLEXSHIELD Epoxy Coating Provides Extra Corrosion Protection of Stainless Steel 304.
For Extra High Demand Appliances, Such as Tankless and Commercial Water Heaters.

Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

Long nipple for connecting two threaded pipes and extending pipe length.
1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Hausen 18-Inch Stainless Steel Water Heater Connector 3/4-inch FIP X 3/4-inch FIP, Water heater supply line, 1-Pack

Flexible hose for use in potable water and hydronic heating applications.
Heavy-duty construction made from lead-free materials.
compatible with hot and cold supply lines to the water heaters with 3/4" fip x3/4"fip thread connection.
Temperature rating: 68 degrees F - 158 degrees F.

Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
【Operating temperature range】Temperature rating: -65 to 250 degrees F.
【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..

Check Stock