Top Clamp And Cut Edge Guide Reviews

Bora WTX Clamp Edge 4 Pc. Set, 50” + 24” Clamps + 50” Extension + Saw Plate

  • Set includes a saw plate, 24-inch and 50-inch clamp edges, and 50-inch extension that can be attached to either clamp edge.
  • Ridged aluminum straight edge guides make straight, accurate track saw like cuts.
  • Clamp edge features a soft-grip, non-marring rubberized clamping pad securely grips all surfaces.
  • Saw plate fits left or right handed circular saws and can be used on clamp edges up to 3-1/2 (89mm) inches wide.
  • Use the saw guide with your circular saw to cut with unmatched precision, or used for free hand cutting with the plate attached.
Check Stock

MPOWER CRB7 Combination Router Jig Mk3 *MEGA BUNDLE* 9 Separate Functions – Including Large and Small Circle Cutting Jig – Multifunctional Router Guide for Routers for Woodworking

  • ...th uninterrupted “Sight lines”. Cut centred and off centred mortises. Cut hinge and lock rebates. Repeat cut sets of flutes. Edge Mould Parallel to edge groove or channelling..
  • 5. Offset Router Base Plate. 6 Anti Tilt Router Support. 7 Adjustable Mortising. 8 False Panel Rebate Copier. 9 Adjustable Straight Edge Clamp Guide. 10 EDGE AND DOWEL TRIM KIT Creating a stable router platform, maintaining a consistent cutter height and Increasing routing pass speed with the Tracer Racer Bearing..
Check Stock

Bora 36 Wtx Modular Clamp Edge w/ruler 545036

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

Bora 24 WTX Modular Clamp Edge w/ruler 545024

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

Bora WTX 50-Inch Ruled Clamp Edge and Jigsaw Guide Set, 545059K

  • Jig saw guide is fully adjustable to accommodate most jig saws.
  • Adjustable pointer guide keeps your cuts true.
  • Clamp Edge includes ruled edge for easy measuring.
  • Easy to change from cutting with the Clamp Edge guide to cutting freehand.
  • Clamp Edge made of heavy-gauge, extruded aluminum for extreme durability.
Check Stock

Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking Contractors Carpenters and DIY Guide for Circular Saws 100 Inch Cutting Length 545100

  • Get It Straight Every Time: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. It’s long 100-inch length....
  • Locked In: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle....
  • Make Measuring Easy: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and....
  • Suited For Your Needs: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX....
  • Additional Accessories: The BORA WTX Saw Guide System has additional accessories including the Saw Plate, Track Clamps for cutting any angle, and the....
Check Stock

Pro-Grip Straight Edge Clamps (24\ Clamp)

  • Pro Grip Straight Edge Clamps are the perfect combination of a clamp and an edge guide. Think of it instant accuracy for cross-cutting and routing..
  • Use them as a fence on your bandsaw or drill press, or even as an auxiliary fence on your router table or table saw. The Pro Grip Straight Clamps Feature: An extruded aluminum body that is light weight and durable..
  • The unique 2-3/16" wide tube rail construction keeps the PRO-Grip Clamps light and easy to use, yet more rigid than other similar clamps on the market. Low profile jaws (that never get in the way) are perfect for sanding and routing projects..
  • Get straight and accurate cuts, dados and grooves simply by aligning the clamp on your marks, securing the clamp and make the cut. The jaws firmly hold any piece to the full length of the clamp without any side-to-side play..
  • The smooth cam lock is a one-hand operation and has 3 varying levels of pressure for just the right amount of Grip. This package includes 1 each 24" clamp..
Check Stock

Bora Jigsaw Guide For WTX or NGX Clamp Edge Use for making Straight Cuts & As A Steady Guide for your Jigsaw -542009

  • Made for jigsaws - this jigsaw guide is specifically designed to fit most jigsaws.
  • Easy to use - the jigsaw guide attaches easily to the Bora clamp edge, and your Jigsaw seamlessly fits into it, allowing for precise straight cuts.
  • Solid design - With two "tongue and groove" Points that slide into the Bora clamp Edge's side grooves, it's a firm, steady guide for your Jigsaw.
  • Fully adjustable - the sliding side points and locking screw allow it to accommodate almost any size Jigsaw. Adjustable pointer guide keeps cuts true.
  • An ideal woodworking accessory – made to use with our Bora Clamp edge range to help you achieve straight cuts with your Jigsaw.
Check Stock

Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050

  • GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill..
  • CONTRACTOR’S COMPANION - This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools..
  • LOCKED IN - The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge..
  • AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts..
Check Stock

BORA 5-Piece NGX Clamp Edge System Set for Making Precision Cuts Includes 50-inch Clamp Edge 50-inch Extension Pro Saw Plate Track Clamps Non-Chip Strip 544500

  • Track Saw Precision: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time.
  • 100” of Cutting Capacity: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension..
  • Stop the Guesswork: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts..
  • Reduce Tear Out: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish.
Check Stock

BORA WTX Ruled Clamp Edge Saw Guide 50 Inch Length Rail for Circular Saws Cutting Track for Woodworking Contractors DIY 545050

  • Time Saver: The BORA WTX Ruled Clamp Edge Saw Guide makes it quick and easy to achieve straight, precise cuts when cutting plywood sheets or MDF with....
  • Fast Set-Up: Adjust the gripping clamp end to the desired length, lock it in place, and start cutting.
  • Long Cutting Length: This 50” guide rail is long enough for large and wide sheet material and can be used with all types of saws. Easily increase....
  • Ruled Straight Edge: The top edge of the clamp includes a ruler imprint with both metric and imperial measurements to guarantee your cuts are always....
  • Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to....
Check Stock

Bora NGX T-square Clamp Edge Accessory 544002

  • Squares your clamp edge to the material you are cutting.
  • Trapezoidal wedge system makes it easy to connect components.
  • Precision aluminum extrusion profile perfectly matches clamp edge fixed head.
  • Part of the NGX Clamp Edge System to cut and rip sheets and boards.
Check Stock

BORA 50 NGX Clamp Edge Extension Straight Cut Guide for Circular Saws | Add 50-Inches to Your NGX Clamp Edge 544060

  • Fits into NGX Clamp edge saw guide to increase length by 50 inches.
  • Made of heavy-gauge, rigid aluminum for extreme durability.
  • Adds 50-inches to your existing NGX clamp edge guide.
Check Stock