Top Chip Evacuation Reviews

Greenlee GSBSET3 Step Bit Set (#1, 4, 9)

  • Durable split-point tip for fast, accurate material penetration.​.
  • Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.​.
  • Progressive cutting edges provide balanced aggression to maximize torque efficiency and minimize stalling.​.
  • Improved double flute design for superior chip evacuation, cutting speeds and tool life.​.
  • Three-flat shank for all 1/2” drill chucks.​.
Check Stock

Forstner Bit Set 16 Pcs - BAIDETS Wood Drilling, Forstner Drill Bit with Center Positioning

  • ...el, durable. Provides long-term effective work performance and safety performance in continuous drilling. The rounded edge design ensures that the desired round shape is drilled in all aspects..
  • 【EASY TO USE】The tooth-shaped bevel cutting edge design ensures easier cutting and less frictional heat, spacious chip evacuation, smooth chip evacuation and high efficiency..
  • 【CENTRAL POSITIONING】The central tooth of the Forstner bit ensures precise and stable positioning during operation, ensure precise drilling and prevent shaking and walking during operation..
  • 【WIDELY USED】Suitable for power drills, power drills, bench drills, vertical drills, hand drills and floor drills, which are used to assemble spherical door drive tips, drawers.
  • Wood products, plastic products, wood and plywood drilling..
Check Stock

ASNOMY 12Pcs M42 HSS Bi-Metal Hole Saw Set, 11/16 inches - 3 inches Large Size Hole Opener Hole Saw Cutter Tool for Drilling Cornhole Board, Plastic, Pipe, Wood, Fiberboard, Soft Metal

  • 12PCS Bi-Metal Hole Saw Kit: Include 11/16″(18mm) , 13/16″(20mm), 15/16"(24mm), 1-1/8"(28mm), 1-3/16"(30mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(45mm), 2"(50mm),2-3/16"(55mm),2-9/16"(65mm), 3"(75)mm,a variety of sizes can meet your different needs,the cutting depth is 1-3/16"(30mm). Each hole saw has a arbor with drill bit..
  • Top Quality: This Hole saw set made from M42 HSS and Bi-Metal,make it have higher hardness (≥64HRC) and higher toughness than standard hole saw, better cutting performance, so that it can cut ceiling tiles and gypsum board smoothly.
  • Cutting is more efficient and clean: The hole cutter made of heavy-duty bimetal and unique sharp HSS has sharper teeth, and has four chip evacuation holes, which has more powerful chip evacuation capability. Make it possible to quickly remove the cutting material, and the cutting edge is smoother.
  • Wide Application: This 4 hole Saw blade perfect for drilling metal sheet, drywall, plastic pipe, wood, PVC, fiberboard, grommet hole, recessed light and can light hole Drilling..
  • Satisfaction: ASNOMY aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems ASAP..
Check Stock

12V1-26 HSS Tap Schrader Tyre Valve Thread ABBOTT

  • Single flute design for applications in aluminum and non-ferrous materials.
  • Polished flute improves chip evacuation and helps to reduce built up edge.
  • Optimized geometry for increased material removal rates.
Check Stock

8V1-32 HSS Tap Schrader Tyre Valve Thread ABBOTT

  • Designed for threading multiple thread pitches (ANSI, UN, and Metric 60°).
  • Polished split face for improved edge retention and chip evacuation while reducing galling.
  • Split geometry makes the tool as rigid as possible.
  • Lockdown flat automatically locates tool on center.
Check Stock

6V1-32 HSS Tap Schrader Tyre Valve Thread ABBOTT

  • Single flute design for applications in plastics.
  • Optimized geometry for increased material removal rates.
Check Stock

GBJ 10pcs SEKT1204AFN-FK Interchangeable Face Milling Inserts Rough Processing for Steel and Stainless Iron Parts on Face Milling Holder

  • ☞ Using high-quality 42CrMo steel, HRC48. Hardened treatment, sturdy and durable, low resistance..
  • ☞ Large chip space, smooth chip evacuation, stable and good performance even in bad processing conditions.
  • ☞ Suitable for powerful cutting, large rotation and large feed..
  • ☞ Off-position fastening design of screws make the inserts and milling cutter more fit..
  • ☞ Package includes: 10pcs SEKT1204AFN-FK Bronze carbide inserts.
Check Stock

90 degree Carbide Inserts Milling Inserts APMT1604PDER Carbide Milling Inserts For Square Shoulder Face Mill Slotting Shoulder Face milling Cutter for BAP400R Milling inserts Holder

  • Model : APMT1604PDER-DP BP010 Milling Inserts.
  • Design for :Cast iron / Die steel /Ordinary steel.
  • Processing Conditions: Interrupted cut and Continuous processing Material: Carbide.
  • Great for:improve the surface finish of the workpiece, shoulder milling, face milling and slotting.
  • Advantage:Sharp and durable,smoothing cutting ,reliable chip breaking and smooth chip evacuation.
Check Stock

Fdit HSS CNC Lathe Straight Shank 4 Flute End Mill Cutter Drill Bit Tool 12mm

  • Single flute design for applications in plastics and composites.
  • Left hand spiral routers drive chips downward, preventing delamination in multi-layered workpieces.
  • Polished flute improves chip evacuation by reducing.
  • Optimized geometry for increased material removal rates.
Check Stock

Micro 100 SFA-125-44 Square End Mill - Upcut, 1/8\ Cutter Dia, 1/2\ LOC, 1 Fl, 1/4\ Shank Dia, 2\ OAL, Uncoated

  • Single flute design for applications in plastics.
  • Optimized geometry for increased material removal rates.
Check Stock

Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

  • High hardness, fast cutting, wear high temperature..
  • Spiral groove is conducive to remove crumbs, not easily broken tap..
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of.
Check Stock

YG1 TG836SET8 | 3 Flute Spiral HSS-Ex TiCN Coated Combo Tap Set

  • Combo 8 pc. tap set with TiCN coated taps - 1/4-20, 1/4-28, 5/16-18, 5-16-24, 3/8-16, 3/8-24, 7/16-14 & 7/16-20.
  • Reduces tap breakage, ensures accurate thread depth. Eliminates loose threads due to tap overfeeding.
  • Improves thread quality and chip evacuation..
Check Stock

YG1 TG836SET8-1 | 3 Flute Spiral HSS-Ex TiCN Coated Combo Tap Set

  • Combo 8 pc. tap set with TiCN coated taps - 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 1/2-13 & 1/2-20.
  • Reduces tap breakage, ensures accurate thread depth. Eliminates loose threads due to tap overfeeding.
  • Improves thread quality and chip evacuation..
Check Stock