Top China Double Sided Pcb Reviews

DEYUE 40PCs PCB Double-Sided Prototyping PCBs Circuit Boards Kit | 5 Size Universal untraced Perforated Printed Circuits Boards | Solder-able Circuit Protoboards for DIY Soldering Electronic Projects

  • 100 % SATISFACTION GUARANTED  ★  Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering.
  • 0.1" hole spacing for DIP integrated circuits and headers..
  • THIS IS NOT YOUR NORMAL PERF BOARD!  ★  This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions.
  • MUTI-PURPOSE ★ General purpose prototyping circuit board for analog and digital use.
  • Double sided board with plated-thru holes allows components to be easily soldered to either side of the board.
  • THE FLEXIBILITY OF HAVINg CHOICES  ★  Great assortment with variety of size and perfect for quickly prototyping stackable circuits.
  • PACKAGE COMPONENT  ★  40 Piece of double sided PCB prototype board in 5 different size (2x8 and 3x7 each 10 Pcs.
  • 7x9 cm each 4 Pcs) with mounting holes or slots on each board corner.
Check Stock

GeeekPi Electronic Fun Kit,with 3PCS Half Sized Breadboard Cable Resistor LED Potentiometer for Electronic Learning Kit, Compatible with Arduino IDE, UNO R3, MEGA2560, Raspberry Pi Range(Black)

  • This is an entry-level kit that contains DIY solderable PCB breadboards, male and female Pin headers, LED lights, resistor packages, and jumper packages..
  • More than 200 pieces of components, compatible with Arduino IDE, Raspberry Pi and other microcontroller boards..
  • 3PCS Proto Breadboard PCB Board Gold Plated Experimental Breadboard Soldering Board Double-Sided PCB.
Check Stock

YK-818 55 Natural Gas Detector Leak Alarm Sensor Butane Methane Gas Monitor, Voice Prompt, Strobe Light Warning, Digital Display (White, No Battery)

  • 【Keep Safty】-- When combustible gases leak (kitchen methane / natural gas /camping propane) exceed the standard, this alarm will sound an 80dB siren speaking voice with top flashing red light until the ambient gas volume falls below alarm set point..
  • 【Powerful Functions】-- This alarm precisely measures and displays an easy to read concentration (0 ~ 20 % LEL) of combustible gas, include natural gas (Main Components: Methane), liquefied gas (Main Components: Butane, Propane), and urban coal gas (Alkane, Olefin, Arene). It sounds alarm and flashes red light once concentration over 5% LEL.【No Battery】.
  • 【Durable & Energy saving】-- Double-sided PCB, flame-retardant ABS plastic, wipes clean easily. It uses .
  • 【Easy to Install】-- Plug-In gas alarm design for home use, A/C-powered, much convenient.【Support bilingual mode of Chinese and English】.
  • 【Factory Warranty】-- This gas alarm has passed the professional gas detection test in our factory. We get CE & ROHS Certificates and China Compulsory Certificate, UL test report. All Ourjob alarms can be 100% guarantee, any quality problems, you can return or get a refund within 30days..
Check Stock

Miuzei PCB Board Prototype Kit for Electronic Projects Circuit Solder Double-Side Board with 40 Pin 2.54 mm Male to Female Headers Connector 2P&3P Screw Terminal Block Solder Flux Solder Wire

  • ⭐【6 Different Sizes PCB Boards】Double Sided Prototype PCB Boards--1 × 9*7cm, 2 × 8*6cm, 5 × 8*2cm and 5× 7*5cm, 5 × 7*3cm, 5 × 5*4cm PCB....
  • ⭐【Convenient for Projects】The upgrate 0.8mm....
  • ⭐【Header Connector】6 pcs 40 pin Male Header, 4 pcs 40 pin Pitch Right Angle Male Headers, 6 pcs 40 Pin Female Header.
  • ⭐【Screw Terminal Block】8 Pcs Screw Terminal Block: 6 pcs 5.08-301-2P and 6 pcs 5.08-301-3P.
  • Pitch: 5.08mm, Rated Voltage: 300V, Rated Current:....
  • ⭐【High Quality & Warranty】Durable Glass Fiber-FR4 Material (Thickness 1.6mm) is A Very Solid and Durable Prototype Circuit Board.
Check Stock

American Bass Amp D Class 1 Ohm Stable 4000 Watts Max

Check Stock

YaeCCC 110V Ultrasonic Cleaner Power Driver Board with 2PCS 50W 40K Transducers

  • -The ultrasonic generator can monitor the power system frequency ultrasound power..
  • -According to different requirements of users, real-time adjustment of various parameters: The power, amplitude, and running time..
Check Stock

Patriot Signature 4 GB PC3-10600 (1333 MHz) DDR3 Desktop Memory PSD34G13332

  • Non-ECC Unbuffered 240-Pin 2 Rank Double-sided in-line memory module.
  • PCB height: 1181(mil) and 1.5V Power Requirement.
  • 100% Tested, RoHS Compliant, JEDEC Compliant.
Check Stock

RF Mixer, Low Noise Diode Passive Frequency Transducer Module for Phase Comparator for Demodulator

  • Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
  • The interior is composed of double balanced microwave diodes, come with high reliability.
  • 35dB high isolation between local oscillator and RF input, which is stable and reliable.
  • The product have large heat dissipation area, possess stable operation and long running time.
  • The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
Check Stock

RF Mixer, Passive Frequency Transducer Module RFout=DC?1.0GHz Diode for Demodulator for Phase Comparator

  • The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
  • The interior is composed of double balanced microwave diodes, come with high reliability.
  • The product have large heat dissipation area, possess stable operation and long running time.
  • Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
  • 35dB high isolation between local oscillator and RF input, which is stable and reliable.
Check Stock

Patriot Signature 8GB DIMM DDR3 CL11 PC3-12800 (1600MHz) PSD38G16002

  • 7.8US Refresh Interval (8192 CYCLES/64MS).
Check Stock

RF Mixer, RFin=1.5‑3.8GHz Converter Double Balanced Frequency Transducer Module for Phase Comparator for Demodulator

  • The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
  • Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
  • The product have large heat dissipation area, possess stable operation and long running time.
  • The interior is composed of double balanced microwave diodes, come with high reliability.
  • 35dB high isolation between local oscillator and RF input, which is stable and reliable.
Check Stock

Double Balanced Frequency Transducer Module, RF Mixer Diode RFout=DC‑1.0GHz for Phase Comparator for Demodulator

  • The product have large heat dissipation area, possess stable operation and long running time.
  • The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.
  • 35dB high isolation between local oscillator and RF input, which is stable and reliable.
  • Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
  • The interior is composed of double balanced microwave diodes, come with high reliability.
Check Stock

Handmade 1st Birthday Cake Topper Decoration - One - Double Sided Glitter Stock (Gold)

  • ...gn Studio and fulfilled by AMAZON. All others are NOT the actual product. Cake Topper Lettering is 5.86 inches wide x 2.11 inches tall. The picks are 3.5 inches long. Ideal for an 8 inch cake to celebrate a 1st birthday!.
  • Handmade by Christina Shannon, artist & mother of two twin boys, in Lansdale, PA :).
  • Top quality double sided gold glitter stock gives a heavy duty feel and prevents shedding, so glitter doesn't wind up on your cake. (beware of made in China toppers, which often use less expensive SINGLE sided stock).
  • Picks are mounted flush using clear adhesive and clear picks which makes your 1st birthday cake topper look seamless. (doesn't "bubble out" like mass produced cake toppers).
  • Lettering is hand-crafted using a blade cut printing device to ensure quality, precision, and accuracy.DescriptionThis gold glitter "one" cake topper will be the perfect addition to your child's first birthday party or one year photo shoot and is handmade by Christina Shannon, artist & mother of two twin boys, in Lansdale, PA. Cake Topper Lettering is 5.86 inches wide x 2.11 inches tall. The picks are 3.5 inches long. Ideal for an 8 inch cake to celebrate a 1st birthday! Top quality double sided glitter stock gives a heavy duty feel and prevents shedding, so glitter do....
Check Stock