Top Butt Weld Tube Reviews

Magpul MOE Rifle Stock, Black

  • Mounts to rifle-length receiver extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
  • Provides a high-quality, economical alternative to standard firearm parts.
  • Distinguishes itself with a simplified feature set, but maintains Magpul engineering and material quality.
Check Stock

DeadEyeVR Annihilator 2 - VR Magnetic Carbon Fiber Rifle Adapter Stock Controller Attachment Accessory for Virtual Reality (Oculus / G2 - Sling - AR15)

  • Mounts to rifle-length extension tube without A2 spacer (not included).
  • Can be adapted for use with dozens of different rifle and shotgun chassis.
  • Sloping cheek weld combines a slim profile with user comfort.
  • Overall shape provides for offhand hold options.
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage.
  • Large storage compartment easily accessible behind hinged butt-plate.
  • Knockout bosses on the bottom allow for the addition of an optional accessory rail.
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

CURT 49090 2-Inch x 9-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

  • STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
  • HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
  • REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
  • READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
  • PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check Stock

CURT 49240 2-Inch x 24-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

  • STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
  • HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
  • REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
  • READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
  • PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check Stock

CURT 49120 2-Inch x 12-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

  • STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
  • HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
  • REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
  • READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
  • PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check Stock

CURT 49180 2-Inch x 18-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

  • STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
  • HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
  • REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
  • READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
  • PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check Stock

CURT 49060 2-Inch x 6-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

  • STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
  • HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
  • REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
  • READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
  • PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.
Check Stock

TOPTOW 64453 Trailer Hitch Receiver Tube Weld on Raw Steel for 2 Inch Hitch Receiver, 6 inch Length

  • ★Receiver Size: This trailer hitch receiver tube has 2 inch by 2 inch industry-standard fit.
  • ★The weld-on hitch receiver is with 6 inch of total length.
  • ★The tow hitch receiver tube is ready to Weld, with Raw Steel Finish.
  • ★The weld-on trailer hitch tube is with 5/8 Inch Pre-drilled Hitch Pin Hole.
  • ★This receiver hitch adapter can be used for custom welding project.
Check Stock

TOPTOW 64454 Trailer Hitch Receiver Tube 2-inch X 9-inch Length Storage Box Combo Bar, Weld on Raw Steel

  • ★Receiver Size: This trailer hitch receiver tube has 2 inch by 2 inch opening.
  • ★The weld-on hitch receiver is with 9 inch of total length. Make sure you need this length of hitch box before purchasing it..
  • ★The tow hitch receiver tube is ready to Weld, with Raw Steel Finish.
  • ★The weld-on trailer hitch tube is with 5/8 Inch Pre-drilled Hitch Pin Hole.
  • ★This receiver hitch adapter can be used for custom welding project.
Check Stock

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • High-quality and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
  • Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work befor....
Check Stock

WeldingCity 10-pcs TIG Welding Tungsten Electrode Tri-Element Non-Radioactive (Purple/AWS: EWG) 1/16

  • For Accurate Calibration of Butt Fillet Type Welds.
  • Determine the Leg Size of the Fillet Weld.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock