Top Steel Weld Tube Reviews

TOPTOW 64453 Trailer Hitch Receiver Tube Weld on Raw Steel for 2 Inch Hitch Receiver, 6 inch Length

★Receiver Size: This trailer hitch receiver tube has 2 inch by 2 inch industry-standard fit.
★The weld-on hitch receiver is with 6 inch of total length.
★The tow hitch receiver tube is ready to Weld, with Raw Steel Finish.
★The weld-on trailer hitch tube is with 5/8 Inch Pre-drilled Hitch Pin Hole.
★This receiver hitch adapter can be used for custom welding project.

Check Stock

TOPTOW 64454 Trailer Hitch Receiver Tube 2-inch X 9-inch Length Storage Box Combo Bar, Weld on Raw Steel

★Receiver Size: This trailer hitch receiver tube has 2 inch by 2 inch opening.
★The weld-on hitch receiver is with 9 inch of total length. Make sure you need this length of hitch box before purchasing it..
★The tow hitch receiver tube is ready to Weld, with Raw Steel Finish.
★The weld-on trailer hitch tube is with 5/8 Inch Pre-drilled Hitch Pin Hole.
★This receiver hitch adapter can be used for custom welding project.

Check Stock

304 Stainless Steel Bench Pedestal - 16.25\ High

ROBINSON STEEL COMPANY IS PROUD TO BE THE MANUFACTURER OF THE ONLY FLANGED STYLE 304 GRADE STAINLESS STEEL PEDESTAL MADE IN THE USA.
8.25" diameter x 11 gauge flange plates top and bottom.
Heavy Duty Steel Tube: 2" diameter x .12" wall (11 gauge).
Steel Tube is welded to top and bottom plate with a full 2" diameter weld 1/8" fillet.
Universal pedestal with three holes in top/bottom plate for bench and floor mounting, Stainless steel hardware is provided for mounting to bench tops, Floor anchor bolts are NOT provided..

Check Stock

Coyote-Powered ’04 Mustang GT Gets Put on Rails! Incredible Suspension Upgrades!

Universal Application: Parallel 4 link suspension kit fit for Hot Rod Rat Rod Trucks Classic Cars.
Improve Ride Quality: 4 Link kit provides a safe and quality ride with improved handling and cornering performance.
Reinforced Steel Bars: Heavy-duty steel bars have carbon steel heim joint rod ends, construct a sturdy and durable suspension link system for your vehicle.
Complete 4 Link Kit: 5 Steel bars, 4 weld-on axle mounts, 4 weld-on fame mounts, 4 panhard brackets, 10 hex head bolts with nuts, and 10 heim joints (M16*1.5mm) 5/8".
Dimensions: Link bars are 24" long, tube outside diameter is 1.25" with 0.157" wall thickness. No instructions included, message us if you have any questions.

Check Stock

Titan Attachments DIY 24' Weld On Backhoe Thumb Hoe Clamp .5' Steel Plate Assembly CNC Plasma Cut

Easy to assemble and weld. Plasma cut for tight tolerances.
Includes: 2 jaw plates, 1 gusset plate, 1 backplate, 2 side plates, 1 hinge tube, 3 clevis pins with keeper pins.
1/2" Teeth Bars, and 3/8" body assembly plates Comes unpainted and ready to weld.
Please measure your bucket before ordering to ensure a proper match..

Check Stock

High-Performance Handling for Street or Track: Vehicle dynamics, suspension mods & setup - Anti-roll bars, camber adjusters & chassis braces - High-performance driving techniques (Motorbooks Workshop)

Universal Application: Parallel 4 link suspension kit fit for Hot Rod Rat Rod Trucks Classic Cars.
Improve Ride Quality: 4 Link kit provides a safe and quality ride with improved handling and cornering performance.
Reinforced Steel Bars: Heavy-duty steel bars have carbon steel heim joint rod ends, construct a sturdy and durable suspension link system for your vehicle.
Complete 4 Link Kit: 5 Steel bars, 4 weld-on axle mounts, 4 weld-on fame mounts, 4 panhard brackets, 10 hex head bolts with nuts, and 10 heim joints (M16*1.5mm) 5/8".
Dimensions: Link bars are 24" long, tube outside diameter is 1.25" with 0.157" wall thickness. No instructions included, message us if you have any questions.

Check Stock

JEGS Universal Brake Line Kit | Made In USA | Includes 25 Of 3/16 Steel Line PTFE-Lined Stainless Brake Hoses Weld Tabs Clips Female Tees Tube Adapters Fittings And Tube Nuts

CONTAINS the parts needed to install new brake lines with braided stainless brake hose on most vehicles.
INCLUDES: (1) 25' coil of 3/16" steel brake line, (4) -03AN x 18" PTFE lined stainless steel brake hoses, (4) Brake line weld tabs, (4) Brake line clips, (2) 3/8"-24 inverted flare female tees, (4) -03AN to 3/8"-24 inverted flare female tube adapters, (2) 1/8" NPT to 3/8"-24 inverted flare female fittings, (2) 9/16"-18 Tube Nuts, (2) 1/2"-20 Tube Nuts, (2) 7/16"-24 Tube Nuts, & (20) 3/8"-24 Tube Nuts.
INSTRUCTIONS show suggested line routing for traditional rear axles or independent rear suspension.
NOTE: ITEMS YOU MAY NEED THAT ARE NOT INCLUDED: caliper and wheel cylinder adapters, brake light switch, tee, and pigtail, residual pressure valves, and tools.
MADE IN USA with high quality components and assembly.

Check Stock

Parker Weld-Lok 6-1 AW2-SS Stainless Steel 316 Tube Socket to Butt Weld Tube Fitting, Adapter, 3/8\ Tube OD x 1\ Pipe Size, 0.95\ Bore

Careful welding procedures are normally followed to assure that this root area is included in the weld.
The joint will have two builtin stress risers which may greatly reduce the strength of the weld.

Check Stock

Parker Weld-Lok 8-3/4 AW2-SS Stainless Steel 316 Tube Socket to Butt Weld Tube Fitting, Adapter, 1/2\ Tube OD x 3/4\ Pipe Size, 0.73\ Bore

Careful welding procedures are normally followed to assure that this root area is included in the weld.
The joint will have two builtin stress risers which may greatly reduce the strength of the weld.

Check Stock

1 X 10-inch Hand Auger Wood Dril, Hexagon Embedded Welding Bushcraft Hand Auger Wrench Scotch Eye Auger Manual Bushcraft Auger Set w/Leather Case Survival Tools -by MinliGUY

[Upgraded Welding Scotch Eye Wood Auger Not Easy to Break] Embedded weld which increases the weld area and makes the weld of scottish eye and bushcraft drill more sturdy..
[Sharp Scottish Eye Save Effort to Cut]The edge thickness of the bushcraft auger scotch eye is 1/64" hammering it into the wood easier and faster suitable for the hole you drill in the project.
[Processed with Hardening Quenching]MinliGUY long scotch-eyed auger bit is made of high-quality hardened carbon steel with super strong high-temperature hardness making this bushcraft auger tool not easy to deform when cutting or drilling..
[Sharp Bit& Cutting Edges]The tip of the manual wood drill bit dowels the drill down into the wood with ease. The cutting edge of the bit is professionally ground sharp and clean without burrs..
[Package Details]Coming with 1"*10" survival wood drill& 1 protective cover& 1 blow fire tube& 1 portable PU leather case. Commonly used for camping backpacking hiking etc..

Check Stock

uxcell Stainless Steel Compression Tube Fitting 1/2 NPT Male x 1/2\ Tube OD

【1/2 NPT MALE x Ф1/2 TUBE OD】Tube OD : 12mm(1/2").
【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation.
【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing, convenient installation and maintenance, safe and reliable operation.
【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.

Check Stock

uxcell Stainless Steel Compression Tube Fitting 1/8NPT Male x 3 Tube OD

【1/8 NPT MALE x Ф3 TUBE OD】Tube OD : Ф3.
【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can remove the drawbacks caused by inadvertent welding.
【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation.
【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.

Check Stock

uxcell Stainless Steel Compression Tube Fitting 1/4NPT Male x 6 Tube OD

【1/4 NPT MALE x Ф6 TUBE OD】Tube OD : Ф6.
【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can remove the drawbacks caused by inadvertent welding.
【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation.
【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.

Check Stock