Top Bushing Shaft Spacer Reviews

Martin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

MaxAuto 11x4.00-5' Flat Free Zero Turn Mowers Tire on Wheel, 3/4' or 1/2' Bushings, 3.4' Centered Hub - Hub Length 3.4'-5', Universal Fit Smooth Tread Tire for Zero Turn Lawn Mowers, Set of 2

  • 【Parameter】Tire Size: 11×4.00-5″, Tire Diameter:11″, Tire Width: 4″, Hub Length: 3.4″-4″-4.5″-5″ Centered Hub, Bushing size: 3/4″ or 1/2″, Rim Diameter: 6″, Load Capacity: 350 lbs(158 KG), NOT for highway use and static load-bearing. Please check your existing Tire Size, Hub Length, Hub Type and Bushing Diameter to ensure correct replacement..
  • 【Extra Adapter Kit】11×4.00-5″ Flat Free Tire is pre-assembled with 3.4″ centered hub and 3/4″ bushing. Comes with an additional adapter kit, 4pcs of 1/2″ Bushing, 4pcs of 1/4 ” spacer, 4pcs of 1/2″ spacer, 4pcs of washer, 4pcs of shim, which can greatly expand its compatibility. Allowing to adjust Hub Length and Bushing Size based on their needs..
  • 【Repalcement for】11×4.00-5″ Flat Free Tire on Wheel is suitable for most zero-turn lawn mowers and garden tractors. Widely Applicable for Model F935 / RTZ42 / ZTX42. Be noted that 11×4.00-5″ Flat Free Tire is not fit for Model RZT L/ Z335 E / Compact Pro 34..
  • 【Feature】11×4.00-5″ Flat Free Tire is made of solid polyurethane foam, maintenance-free and puncture-proof, saving time, no need to worry about air pressure and inflation..
  • 【Package Include】Set of 2 11×4.00-5″ Flat Free Smooth Tread Tire on Wheel. Repl....
Check Stock

TB Woods 2517 TL25171 Taper Lock Bushing, Cast Iron, Inch, 1\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 3020 TL302050MM Taper Lock Bushing, Cast Iron, 50 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 2517 TL2517138 Taper Lock Bushing, Cast Iron, Inch, 1.375\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 1008 TL100858 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 1108 TL110822MM Taper Lock Bushing, Cast Iron, 22 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 2517 TL251758 Taper Lock Bushing, Cast Iron, Inch, 0.625\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 2517 TL2517238 Taper Lock Bushing, Cast Iron, Inch, 2.375\ Bore, 1200 lbs/in Torque, Standard Design, Shallow Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 2012 TL201230MM Taper Lock Bushing, Cast Iron, 30 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock

TB Woods 1610 TL161025MM Taper Lock Bushing, Cast Iron, 25 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Cast iron for resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper lock bushings from various manufacturers.
Check Stock