Top Brass Cap Nut Reviews

KES Bathroom Sink Drain without Overflow Vessel Sink Lavatory Vanity Pop Up Drain Stopper Polished Chrome S2008D-CH

  • Standard 1 3/4" Drain Opening: Fits sink hole diameter 1.6-inch to 1.9-inch. MAX. sink thickness 1.97-inch. Ideal for any above-counter vessel sink....
  • Solid Metal Construction: The pop-up drain stopper is constructed of brass and type 304 premium grade stainless steel, protecting against corrosion....
  • Easy to Operate: Spring loaded push button does not require a lift rod. Simply push the drain cap down to close and to seal, push again to open and to....
  • Easy to Install, No Leaks: All required gaskets, seals and brass mounting nut are included. Please make sure the gaskets are in the right position....
  • Dimension: Overall length from the top of pop-up cap to the end of tailpiece: 8.46". Diameter at Top: 2.6". Diameter at tailpiece connection: 1.25"..
Check Stock

KES Bathroom Sink Drain with Overflow Vessel Sink Lavatory Vanity Pop Up Drain Stopper Polished Chrome Finish S2007A-CH

  • Standard 1 3/4" Drain Opening: Fits sink hole diameter 1.61-inch to 1.97-inch. MAX. sink thickness 1.97-inch. Ideal for any above-counter vessel sink....
  • Solid Metal Construction: The pop-up drain stopper is constructed of brass and type 304 premium grade stainless steel, protecting against corrosion....
  • Easy to Operate: Spring loaded push button does not require a lift rod. Simply push the drain cap down to close and to seal, push again to open and to....
  • Easy to Install, No Leaks: All required gaskets, seals and brass mounting nut are included. Please make sure the gaskets are in the right position....
  • Dimension: Overall length from the top of popup cap to the end of tailpiece: 8.46". Diameter at Top: 1.5". Flange Diameter: 2.4". Diameter at threaded....
Check Stock

Sea-Dog 420101-1 Toggle Switch, On/Off

  • Water resistant Toggle Switches feature a locking ring with lever seal and a protruding cap nut.
  • Easy to install for a variety of applications.
  • Constructed of stamped brass, injection molded nylon, and polycarbonate.
Check Stock

Gate Latch Cable Pull Gate Opener Adjustable from 2\ to 6\ Posts Stainless Steel Spring 2 Pack(Black)

  • Stainless steel cable with black power coated and PVC coating finish with weatherguard technology to protect against rust and weather..
  • Fits gates with a 4 inch to 2-6 inch thickness. The brass cylinder is just fits the hole that greater than 0.18 inches (4.5mm) and less than 0.31 inches (8mm) for the brass cylinder nut to fit in the hole..
  • Stainless steel spring assisted pull for one hand operation, gate latches can still be padlocked while using this gate pull..
  • Use this cable pull with new or existing gate latches.
  • This cable pull does not come with a gate latch..
  • For use with metal, vinyl, and wood gates. Contents: Package includes Gate latch cable *2+ brass cylinder *2+ spring*2+End Cap*2+Hexagonal Wrench*2.
Check Stock

DROP-IN DRAIN Installation Kit for Freestanding Bathtub - with White PVC Pipe and brass pipes

  • DROP-IN DRAIN Installation Kit for Freestanding Bathtub with White PVC Pipe..
  • Quick, easy and clean installation. No access panel required. Needed for all freestanding bathtub installation. The removable / reusable cap allows....
  • Drain kit allows for installation as close to the wall as possible. Plate can be uninstalled if adjustments are needed..
  • cUPC certified. Fits with 1-1/2" male, 1-1/2" female or 1-1/2" threaded bathtub drains..
  • KIT INCLUDES: Drop-In Drain Plate and Lubricant, 1-1/2" Male & Female Adapters, Nut & Gasket, Brass Tailpiece, Threaded Brass Tailpiece, and White PVC....
Check Stock

KAIYING Pop Up Drain Bathroom Sink Drain Stopper with Overflow Vessel Sink Drain Assembly with Detachable Basket Stopper Anti-Explosion and Anti-Clogging Drain Strainer Brushed Gold

  • ...t neatly collecting human or pet hairs and prevents it from clogging up, stuff will not get into the drain, such as jewelry, ring, dirt and so on. When it's time to clean up, simply take the strainer out, wipe it off and GO!.
  • 【HIGH-QUALITY MATERIAL】-Pop-up drain stopper, drain flange, threaded pipe are made from brass, tailpiece is constructed of thickened premium grade 304 stainless steel. All metal construction for maximum durability. Superior finish is corrosion & rust-resistant..
  • 【EASY TO OPERATE】-Spring loaded push button does not require a lift rod. Simply push the drain cap down to close and seal, push it again to open and drain water. You can turn the upper cap counter-clockwise to unscrew and remove..
  • 【EASY INSTALLATION】-Anyone can install a pop up drain due to its simple construction, no tools required, the thickened and extended nut allow it to be mounted by bare hand(Please refer to product pictures or instructions). Package includes drain housing with 2 gaskets, one pop up plug with the strainer basket, one brass nut and one plumber's tape..
  • 【STANDARD 1 3/4" DRAIN OPENING】-Fits bathroom sink hole diameter 1.46-inch to 1.9-inch. MAX. sink thickness 1.97-inch. Tailpiece diameter: 1 1/4". Ideal for sinks with overflow (above....
Check Stock

Panel Nut 3/8-32 Thread 1/2\ Hex Brass Nickel Pack of 50

  • Panel Nut 3/8-32 thread 1/2" Hex Brass Nickel Pack of 50.
Check Stock

HAWK 10\ Heavy Duty Jack Plane (#4) With Flat Base - TZ4374

  • Popular And Versatile 9"-length, 2-1/2" Width With 2" Plane Iron.
  • High-carbon Steel Plane For Consistent Smooth Cutting.
  • Spring Steel Iron Cap Curls Shavings And Prevents Clogging.
  • Chrome-plated Steel Iron Lever And Frog Settings With Brass Alignment Nut For Secure Positioning.
  • Hand-formed Wood Handle And Knob For Enhanced Comfort And Control.
Check Stock

Self Locking Gate Gravity Latch Stainless Steel Spring Loaded with Adjustable Gate Latch Cable Pull for Metal Wooden Fences 2 Pack (Red 2 Pack)

  • Stainless steel cable with red power coated and PVC coating finish with weatherguard technology to protect against rust and weather..
  • Fits gates with a 4 inch to 2-6 inch thickness. The brass cylinder is just fits the hole that greater than 0.18 inches (4.5mm) and less than 0.31 inches (8mm) for the brass cylinder nut to fit in the hole..
  • Stainless steel spring assisted pull for one hand operation, gate latches can still be padlocked while using this gate pull..
  • Use this cable pull with new or existing gate latches.
  • This cable pull does not come with a gate latch..
  • For use with metal, vinyl, and wood gates. Contents: Package includes Gate latch cable *2+ brass cylinder *2+ spring*2+End Cap*2+Hexagonal Wrench*2..
Check Stock

Smith Performance Sprayers 182620 Kit with Brass Adjustable Nozzle Color3

  • Brass adjustable nozzle (181823), poly cap nut (181804), Viton flat seal (181812), low volume foaming nozzle assembly (180266), high volume foaming....
  • Red poly flat Fan tip: 0.25 GPM, 70 Degree fan (180097), Yellow poly flat Fan tip: 0.15 GPM, 30 Degree fan (180168).
  • Included with Smith Performance Sprayers Nl400 4-Gallon no leak backpack sprayer.
  • For Smith Performance Sprayers R200 2-gallon compression sprayer.
  • For Smith Performance Sprayers R300 3 gallon sprayer.
Check Stock

SIMMONS MFG CO 851 Hydrant Parts Kit

  • Yard hydrant repair kit for 900 series contains the most popular parts to repair the hydrant.
  • The part kit contains: brass connector, brass lines (2), brass packing nut, pair of o-rings, plunger, stainless steel lot nut, fulcrum bolt, and square head set screw.
Check Stock

Simmons 850SB Repair Kit, 8 Pieces, for Use with 4800 Model and 800Sb Series Yard Hydrant

  • Includes one brass connector, two brass links, one brass packing nut, two bruna-n O rings, one 1 piece plunger, one stainless steel locking nut, one fulcrum bolt and one square head set screw.
Check Stock

WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker

  • WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker.
  • WV8046 Water Valve for 4318046 2188542 Whirlpool Kenmore Refrigerator Icemaker Double Coil Icemaker Water Fill Valve for Whirlpool 4318046.This valve comes with all the neccesary hardware to replace your existing valve including a plastic 1/4″ compression union, a 1/4″ plastic compression nut, a 1/4″ brass compression nut, 1/4″ brass compression sleeve, a 1/4″ x 5/16″ plastic compression union, a 5/16″ plastic compression nut, a piece of 5/16″ plastic tubing, a piece of 1/4″ plastic tubing,.
Check Stock