Top Nut Fastener Reviews

Aexit White Gray Nuts Screw Mounted Cupboard Drawer 3cm Dia Pull Handle Nuts Knob Handle

  • Price For: Each Basic Material: Ductile Iron System of Measurement: Inch Material Grade: Grade 2 Item: Handle Nut Nut Style: Handle Nut Fastener Thread Direction: Right Hand Fastener Thread Type: UNC Dia./Thread Size: 5/16"-18 Flange Dia.: 15/16" Length: 3-3/4" Fastener Finish: Plain Country of Origin (subject to change): Multiple.
Check Stock

BILITOOLS 1/2 inch Drive Impact Lug Nut Socket Set, 15 17 19 21 22 MM Non-Marring Thin Wall Wheel Protector Nut Socket

  • 5 Piece 3.3" alloy wheel nut sockets: 15mm (purple), 17mm (blue), 19mm (yellow), 21mm (red), 22mm (black). Suitable for 1/2" drive impact wrench, air ratchet..
  • The sockets are manufactured from chrome molybdenum steel for excellent strength and wear resistance..
  • This thin wall designed wheel nut socket set has a rotatable protective nylon shell to prevent scratches on the paint surface of the wheel shell when the tire screws are removed, which looks after the alloy wheel..
  • This impact lug nut sockets feature 6 point flank drive to prevent fastener round-off by applying force to a fastener’s flat sides rather than its corners..
  • Every wheel lug nut socket has colour-coded plastic sleeve which facilitates finding the correct size..
Check Stock

BILITOOLS 1/2 inch Drive Impact Lug Nut Socket Set, Metric 17-19 - 21 mm & SAE 13/16-7/8 inch Non-Marring Thin Wall Wheel Nut Socket

  • 5 Piece 3.3" alloy wheel nut sockets: 17mm (blue), 19mm (yellow), 21mm (red), 13/16" (green), 7/8" (black). Suitable for 1/2" drive impact wrench, air ratchet..
  • The sockets are manufactured from chrome molybdenum steel for excellent strength and wear resistance..
  • This thin wall designed wheel nut socket set has a rotatalbe protective nylon shell to prevent scratches on the paint surface of the wheel shell when the tire screws are removed, which looks after the.
  • This impact lug nut sockets feature 6 point flank drive to prevent fastener round-off by applying force to a fastener’s flat sides rather than its corners..
  • Every wheel lug nut socket has colour-coded plastic sleeve which facilitates finding the correct size..
Check Stock

Tri-Groove Tamper Proof Screw and Security Nut Driver Sockets #40 - Qty 1

  • Tri Groove Driver Sockets are made of Alloy Steel..
  • The TriGroove tamper resistant fastener drive style is also referred to as: Tri-Groove, T Groove, Trident Drive and Coned Trident Drive..
  • Security nuts are installed using a special Tri Groove socket, which grips the indentations along the outside of the fastener to turn the nut along a thread..
  • Tri Groove nuts can only be fastened with Tri Groove Driver sockets..
Check Stock

Tri-Groove Tamper Proof Screw and Security Nut Driver Sockets #30 - Qty 1

  • Tri Groove Driver Sockets are made of Alloy Steel..
  • The TriGroove tamper resistant fastener drive style is also referred to as: Tri-Groove, T Groove, Trident Drive and Coned Trident Drive..
  • Security nuts are installed using a special Tri Groove socket, which grips the indentations along the outside of the fastener to turn the nut along a thread..
  • Tri Groove nuts can only be fastened with Tri Groove Driver sockets..
Check Stock

Tri-Groove Tamper Proof Screw and Security Nut Driver Sockets #20 - Qty 1

  • Tri Groove Driver Sockets are made of Alloy Steel..
  • The TriGroove tamper resistant fastener drive style is also referred to as: Tri-Groove, T Groove, Trident Drive and Coned Trident Drive..
  • Security nuts are installed using a special Tri Groove socket, which grips the indentations along the outside of the fastener to turn the nut along a thread..
  • Tri Groove nuts can only be fastened with Tri Groove Driver sockets..
  • Fits tri-groove nut sizes 10, 1/4. Fits tri-groove screw sizes 5/16, 3/8..
Check Stock

Channellock 422 1-1/2-Inch Jaw Capacity 9-1/2-Inch V-Jaw Tongue and Groove Plier , Blue

  • The product is manufactured United States.
  • V-Jaw gives more points of contact on objects.
  • Patented undercut tongue-and-groove design.
  • Patented Permalock fastener eliminates nut & bolt failure.
  • 100% guaranteed against breakage and failure.
Check Stock

DEWALT Nut Driver Set, Impact Ready, Magnetic, 4-Piece (DWPVTDRV)

  • The nut driver set is designed for use in Impact Drivers and Wrenches.
  • Recessed corners of the impact nut driver set drive on flats which minimzes shavings.
  • Industrial strength magnet of the magnetic nut driver maximizes fastener retention.
Check Stock

DEWALT Nut Driver Set, Impact-Ready, Pivoting, 3-Piece (DWPVTDRV3)

  • The nut driver set is designed for use in Impact Drivers and Wrenches.
  • Recessed corners of the impact nut driver set drive on flats which minimzes shavings.
  • Industrial strength magnet of the magnetic nut driver maximizes fastener retention.
Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts 5/16-18 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (10)

  • 10 Pack 5/16-18 Spot Weld Nuts - Single Tab - With Target.
  • This Tab Spot Weld Nut is a recessed electrode guide greatly facilitates welding to thin materials. It is ideal for use when a self-locating spot-weld nut is needed. This weld nut can be used in restricted areas such as corners, channels, and other confined areas..
  • This Tab Spot Weld Nut is extremely versatile and will provide a robust spot weld connection in a wide range of applications and conditions. If your product or application has fastener space constraints, you should consider the use of this weld nut..
  • This weld nut has a narrow body that is well suited for use in confined areas..
  • The weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections..
Check Stock

GEARWRENCH 5 Pc. Ratcheting Flex Head Flare Nut Wrench Set, SAE - 89100

  • Speed - Ratcheting jaw allows you to advance the flare nut without removing the wrench from the fastener.
  • Strength - The ratcheting flex flare nut wrench design exceeds ANSI specifications.
  • Access - Flex head can be positioned though 180 degrees to access hard-to-reach fasteners and the open end flare nut head slips easily over lines.
  • Ease of Use - Size is stamped on both sides for quick identification.
  • High Visibility - Bright chrome finish is easy-to-clean and provides high-visibility.
Check Stock

10 Pack 3/8-16 Floating Cage Nut - Weld Nuts with a Floating Cage Nut for Misaligned Holes

  • Sturdy, dependable fasteners referred to as floating nut retainers.
  • The design of this fastener allows the nut to "float" within the steel cage which is ideal for hole misalignment and blind assembly.
  • These nuts commonly used in fork trucks, rail cars, ocean containers, automobile and office furniture, appliances, and numerous other applications.
Check Stock

GEARWRENCH Ratcheting Flex Head Flare Nut Metric Wrench Set 6 Pc. - 89101D

  • Speed - Ratcheting jaw allows you to advance the flare nut without removing the wrench from the fastener.
  • Strength - The ratcheting flex flare nut wrench design exceeds ANSI specifications.
  • Access - Flex head can be positioned though 180 degrees to access hard-to-reach fasteners and the open end flare nut head slips easily over lines.
  • Ease of Use - Size is stamped on both sides for quick identification.
  • High Visibility - Bright chrome finish is easy-to-clean and provides high-visibility.
Check Stock