Top Brake Line Tool Kit Reviews

VEVOR Brake Line Flaring Tool, 37 & 45 Degree Single, Double, and Bubble Flares for 3/16', 1/4', 5/16' and 3/8' Tube Size, Suitable for Soft Metal of Copper Lines

  • Four Tube Expanding Size: This brake line flaring tool includes 4 dies in the following sizes: 3/16 inch (4.75mm), 1/4 inch (6.35mm), 5/16 inch (8 mm), 3/8 inch (9.5 mm). It creates 37° and 45° single, double, and bubble brake flares in seconds. Reduce the friction on flares to ensure your vehicle operates at optimal performance..
  • Applicable Materials: This double flare brake tool is suitable for expanding copper and aluminum piping. It is an excellent tool for repairs on vehicles or taking lines off of a vehicle. Whether you're working on brake lines, transmission cooler lines, or fuel lines, our flaring tool will help you create the flares you need quickly and easily..
  • Leakproof Connection: With the turret-style design, the professional brake line flaring tool keeps all your dies ready. They are available and within immediate reach with the convenient turret carrier, greatly saving you the hassle of fumbling for small parts or losing them..
  • Vise-Mounted: The brake line flare tool is compatible with a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under a car). The 6.3-inch (16 cm) T-handle screw clamp can hold the die and tube in place firmly without vibration. After repairing, your vehicle will be ....
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check Stock

Raybestos BH380435 Professional Grade Hydraulic Brake Hose

  • Upgraded material - this replacement brake line kit is made of stainless steel for greater corrosion resistance.
  • Pre-formed fit - these lines are sectional and already shaped to fit specific applications for easier installation.
  • Complete kit - includes all tubes and fittings for complete brake line repair.
  • Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Double Flaring Tool Kit 7 Dies with Tubing Bender (Flare Tool) and Pipe Cutter (1/8” to 1-1/8” Inch / 3-30mm) For Automotive Brake Line Copper Brass Aluminum

  • Complete kit: the flaring kit is all that is included, complete with dual flaring capabilities, allowing the mechanic to focus on the job rather than looking for parts..
  • Extensive torch adapter: double flaring toolset features 7 adapter sizes 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8" to help artisan complete the entire range of brake line flaring tool projects..
  • Precision and durability: this twin torch kit is made of the strongest steel material and chrome-plated for easy handling and precision..
  • Double flaring tool: this multi-purpose flaring tool has double flaring function, providing users with a wide range of applications and versatility..
  • Self-centering yoke: the brake line reamer tool consists of two rods covering seven diameters, with self-centering, slideable forged steel yoke to help form a professional and high quality yoke..
Check Stock

OEMTOOLS 25036 Bleed-O-Matic One-Man Brake Bleeder Kit, Featuring An Opaque Brake Bleed Bottle w/ Transparent Hoses and Tapered Fittings, No Mess Brake Fluid Bleeding (Packaging May Vary)

  • RELIABLE BRAKE BLEEDING TOOL: Our brake fluid bleeder kit features a reliable magnet for one-man operation.
  • Designed for use on calipers, wheel cylinders, and master cylinders to give you the most effective brake line bleeder kit for your budget.
  • NO MESS BRAKE BLEED: Get a tight fit over calipers with our tapered fittings and transparent brake bleeder hose of our brakes bleeder.
  • The transparent brake bleeder tubing ensures that you’ll know when the brake line is running clear and air-free.
  • ONE MAN OPERATION: No need to use the two-person method for your brake bleed.
  • Attach the one person bleeder's reservoir to the rotor or similar metallic vehicle surface with the strong magnetic attachment and pump the brake.
  • DURABLE BRAKES BLEEDING KIT: The quality construction of our 2 piece design gives you a durable no-mess operation.
  • Bleed brakes while keeping everything clean of caustic brake fluid.
  • Our handy reservoir makes disposal of brake fluid quick and easy.
  • FITS MOST VEHICLES: Our specially tapered fittings work on most vehicles.
  • The hoses hold firmly to the durable brake bleeder bottle and tapered fittings to create a no-mess operation that keeps your components clean of brake fluid.
Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

  • SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
  • This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
  • FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
  • Press bearings and races into an open hub wheel assembly on most European and American cars.
  • Some tools in the kit are disk brake specific, such as the caliper piston retractor.
  • If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
  • BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
  • The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
  • Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
  • EASY STORAGE: No longer will you need to worry about y....
Check Stock

Dorman 919-220 Stainless Steel Brake Line Kit Compatible with Select Jeep Models (OE FIX)

  • Upgraded material - this replacement brake line kit is made of stainless steel for greater corrosion resistance.
  • Pre-formed fit - these lines are sectional and already shaped to fit specific applications for easier installation.
  • Complete kit - includes all tubes and fittings for complete brake line repair.
  • Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 919-239 Stainless Steel Brake Line Kit Compatible with Select Jeep Models (OE FIX)

  • Upgraded material - this replacement brake line kit is made of stainless steel for greater corrosion resistance.
  • Pre-formed fit - these lines are sectional and already shaped to fit specific applications for easier installation.
  • Complete kit - includes all tubes and fittings for complete brake line repair.
  • Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 919-221 Stainless Steel Brake Line Kit Compatible with Select Jeep Models (OE FIX)

  • Upgraded material - this replacement brake line kit is made of stainless steel for greater corrosion resistance.
  • Pre-formed fit - these lines are sectional and already shaped to fit specific applications for easier installation.
  • Complete kit - includes all tubes and fittings for complete brake line repair.
  • Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 919-138 Stainless Steel Brake Line Kit Compatible with Select Chevrolet / GMC Models (OE FIX)

  • Upgraded material - this replacement brake line kit is made of stainless steel for greater corrosion resistance.
  • Pre-formed fit - these lines are sectional and already shaped to fit specific applications for easier installation.
  • Complete kit - includes all tubes and fittings for complete brake line repair.
  • Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 919-103 Stainless Steel Brake Line Kit Compatible with Select Chevrolet / GMC Models (OE FIX)

  • Upgraded material - this replacement brake line kit is made of stainless steel for greater corrosion resistance.
  • Pre-formed fit - these lines are sectional and already shaped to fit specific applications for easier installation.
  • Complete kit - includes all tubes and fittings for complete brake line repair.
  • Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 919-255 Stainless Steel Brake Line Kit Compatible with Select Chevrolet / GMC Models (OE FIX)

  • Upgraded material - this replacement brake line kit is made of stainless steel for greater corrosion resistance.
  • Pre-formed fit - these lines are sectional and already shaped to fit specific applications for easier installation.
  • Complete kit - includes all tubes and fittings for complete brake line repair.
  • Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 919-144 Stainless Steel Brake Line Kit Compatible with Select Chevrolet/GMC Models (OE FIX)

  • Upgraded material - this replacement brake line kit is made of stainless steel for greater corrosion resistance.
  • Pre-formed fit - these lines are sectional and already shaped to fit specific applications for easier installation.
  • Complete kit - includes all tubes and fittings for complete brake line repair.
  • Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock