Top Brake Line Clamp Kit Reviews

BUCKLOS Mountain Bike V Brake Set for Most Bikes V-Brake Calipers with 2PC MTB Road Bicycle Universal Brakes Line Cable Housing and Brake Levers (Front and Rear) City Bike Black Durable

  • 【Complete brake replacement set】It includes a pair of V-brake brakes (and a pair of replacement brake pads), 2 general stainless steel brake lines for mountain highway vehicles (front and rear), 1 brake line protection hose and a pair of brake levers..
  • 【Sturdy and durable】V brake caliper are made of high quality alloy carbon steel, high strength, corrosion resistance, and more durable..
  • 【Quiet braking】The brake pad of V brake clamp adopts all-weather braking formula rubber, which does not damage the rim, is more wear-resistant and braking is quieter..
  • 【Brake kit size】Brake line (front 43.3 inches, rear 66.9 inches) brake line protection hose 98.4 inches, brake arm 4.9 inches, brake pad 2.2 inches, extended size, suitable for most V-brake bicycles.
  • 【Reminder】Before purchase, please carefully check whether there are V brake mounting holes on the front fork and rear fork of your bicycle.
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check Stock

ATPEAM Hose Clamp Pliers Pinch Off Pliers Set 3 PCS Plastic Fuel Line Clamp Pliers Set for Fuel Hoses, Gas Lines Brake Hoses, Radiator Hoses, Coolant Hoses (3pcs Straight)

  • ...s kit, you will get 3 sizes pinch off pliers to fit all types of hoses, including straight hose clamp pliers: 5.9"/155mm, 7.3"/185mm, 10"/255mm. This hose plier set can clamp hoses with diameters of 15mm, 20mm and 25mm, and with jaw openings of up to 20mm, 30mm, and 65mm respectively. Simply grip the brake line clamp plier on the hose and lock it with the safety buckle to free your hands, super easy and convenient without damaging the hose..
  • 【Wide Application】ATPEAM hose clamp pliers pinch off pliers set includes three sizes clamp plier tools to fit for many types of flexible tubes, is great for automotive flexible hoses, fuel hoses, gas lines brake hoses, radiator hoses, coolant hoses, lawnmower fuel gas lines, water soft pipe, heater hose, and more..
Check Stock

CLAYTON MACHINE WORKS Firewall Mount Brake/Gas Pedal Assembly P/N TA-206-BKA1

  • Hose Clamps: These flexible pinch off pliers can lock into position leaving your hands free to repair.
  • please note that these are not for use on rigid, reinforced, or high pressure lines.
  • Multi-Use: These tools are ideal to use as coolant hose clamp pliers, fuel line clamps, brake line clamp, and even as fuel line clamp pliers.
  • Reliable Material: These hose pinch pliers kit are durable, light weight, non-conductive and rust-proof, easy to use.
  • Dimensions: The large pliers measure approximately 9.93 x 2.12 x 0.75 inches, the medium pliers measure 7.18 x 1.87 x 0.75 inches, the small pliers measure 6.12 x 1.62 x 0.62 inches.
  • What's Included: You will receive a total fo 3 hose pinch off pliers in 3 different sizes.
Check Stock

VEVOR Brake Line Flaring Tool, 37 & 45 Degree Single, Double, and Bubble Flares for 3/16', 1/4', 5/16' and 3/8' Tube Size, Suitable for Soft Metal of Copper Lines

  • Four Tube Expanding Size: This brake line flaring tool includes 4 dies in the following sizes: 3/16 inch (4.75mm), 1/4 inch (6.35mm), 5/16 inch (8 mm), 3/8 inch (9.5 mm). It creates 37° and 45° single, double, and bubble brake flares in seconds. Reduce the friction on flares to ensure your vehicle operates at optimal performance..
  • Applicable Materials: This double flare brake tool is suitable for expanding copper and aluminum piping. It is an excellent tool for repairs on vehicles or taking lines off of a vehicle. Whether you're working on brake lines, transmission cooler lines, or fuel lines, our flaring tool will help you create the flares you need quickly and easily..
  • Leakproof Connection: With the turret-style design, the professional brake line flaring tool keeps all your dies ready. They are available and within immediate reach with the convenient turret carrier, greatly saving you the hassle of fumbling for small parts or losing them..
  • Vise-Mounted: The brake line flare tool is compatible with a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under a car). The 6.3-inch (16 cm) T-handle screw clamp can hold the die and tube in place firmly without vibration. After repairing, your vehicle will be ....
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors and Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # GMC7087X5-K7) 003e Currie Crate Rear Ends are designed to be a bolt-in upgrade.
  • Fits: | Chevrolet Trucks: 003e Will Fit All Late-1970 to 1987 C-10 2wd Trucks with 5-Lug wheels | GMC Trucks: 003e Will Fit All Late-1970 to 1987 C15/C1500 2wd Trucks with 5-Lug wheels.
  • Includes: | Currie 9-Plus Centurian Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMC7087X5) 003e 31 Spline performance axle package 003e Housing includes all 3rd member studs installed 003e GMT7087X5 GMC7072X5 GMC7387X5 003e Built to the stock overall width (63 5/8") and pinion offset specs 003e 63 5/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
  • Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-11389-DR): | Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile 4 Piston Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Br....
Check Stock

Swpeet 14Pcs Bike Brakes Sets, Including 2 Pairs V-Type Brakes, Universal Bike Front and Rear Brake Cable, Cable End Caps, Rubber Boot, V Brake Noodle Bend Pipe for Most Mountain Bike

  • 【 What You Get】 ------ In this kit, You will get 14Pcs Complete Bike Brake Set, Including 1Pcs V Brake Noodle 90 Degree Bend Pipe.
  • 1Pcs V Brake Noodle 110 Degree Bend Pipe.
  • 1Pcs Rear Brake Cable. Intotal 14Pcs can meet all your bicycle installation needs..
  • 【 2 Pairs Mountain V Bike Brakes】 -------- Which can fit most of bicycles mountain bikes, Durable aluminium alloy and plastic and rubber for the bike brake set, they are very strong and with resistance to cold, heat and oxidation. and it is not easy to out of the shape. A fairly decent replacement brake system. Parts are well made and work well. The adjustment screw for the brake springback makes it easy to adjust..
  • 【 4Pcs Cable End Caps】 -------- The end caps included can help prevent the cable ends from splitting and avoid you being poked by the split ends.
  • Put the cap through the cable and clamp the cap to fix it firmly to the cable.
  • 【 High Quality】 -------- The brake housing set is made of alloy and plastic, strong and durable enough for long time use, with resistance to cold, heat and oxidation, not easy to deform, ensuring the brake sensitive, suita....
Check Stock

CLUBRALLY Brake Shoes Spring Kit Fits Club Car 1995-up DS and Precedent Golf Cart 1018232-01 1018163-01

  • ★CLUB CAR BRAKE SHOES SPRING KIT FITS 1995 UP DS & PRECEDENT CLUB CAR GAS OR ELECTRIC GOLF CARTS..
  • ★BRAKE SHOES INCLUDES:Golf Cart Brake Shoes Set(2 Short-17T, 2 Long-17L).
  • ★12 PCS BRAKE SHOES SPRING KIT INCLUDES:(4) BRAKE SHOE CLAMP SPRINGS,(4) BRAKE SHOE HOLD DOWN PINS.(2) BOTTOM BRAKE SHOE SPRING,(2)TOP BRAKE SHOE SPRING..
  • ★CLUB CAR OEM #1018163-01,1011466 1018232-01,AFTER MARKET #S 4324, 4333, 5162, 5219..
  • ★Complete for one golf cart. Easy Installation & 1 year Warranty..
Check Stock

MOSNAI Club Car Brake Shoes Spring Kit Fit 1980 UP DS & Precedent Club Car Brake Kits Golf Carts Brake Shoes Kit Gas/Electric 1018163-01, 1011466(2 Sets)

  • ✅High Quality Club Car Brake Shoes Kit Fits 1980 UP Club Car Gas Or Electric..
  • ✅Fit For: Club Car Brake Shoes Spring Kit Fits 1980 & UP DS & PRECEDENT..
  • ✅Fit For: Club Car OEM # 1018163-01,1011466,After Market #S 4324, 4333, 5162, 5219..
  • ✅12 Pcs Club Car Brake Shoes Kit Includes:(4) Brake Shoe Clamp Sprins,(4) Brake Shoe Hold Down Pins.(2) Bottom Brake Shoe Spring, (2)Top Brake Shoe Spring.(For Two Sides,One Cart).
  • ✅Package Include: 2 Sets Club Car Brake Shoes Spring Kits For One Golf Cart. Easy Installation..
Check Stock

3/8 Fuel Line Tubing Mounting Clamps Stainless Steel Cable Clamp Hardware Rubber Cushioned Insulated Metal Clamp Tube Holder for Tube Pipe or Wire Cord Installation Pack of 10 pcs

  • Cable clamp screw hole diameter: 6.5mm, fit for 6mm ( 1/4 inch) screw bolt to through them. Cable clamp inside diameter 3/8 inch. Fit for 3/8 inch (outside diameter) wiring, lines,hoses or cables to a panel or frame application..
  • The Eastwood 3/8 Inch Fuel Line Mounting Hardware Kit Will Allow You To Complete Your Brake Line Project With Perfect Professional Results..
  • High Quality Stainless Steel Construction, Epdm Rubber Insulation.
  • Universal Application To Mount 3/8 Inch Tubing.
  • These Mounting Clips Are Made From High Quality Stainless Steel So You Can Be Assured That They Will Not Rust Or Corrode.
Check Stock

Amerbm Professional Brake Line Flaring Tool 45 Degree Set Single Double and Bubble Flares Tool Kit for Steel Copper Tube

  • 45-degree tool set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16", 1/4", 5/16", 3/8" diameter lines..
  • This flaring tool is designed to be mounted in a vise, and the T-handle screw clamp securely keeps the die and tubing in place, so you can create flares quickly and easily..
  • The "turret-style" design allows you to make those precision flares in a minimal time, which saves you the hassle of groping for small parts or losing them..
  • When building car brake lines, the brake flaring tool kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises..
  • The flaring tool set is made of durable steel for reliable and long-lasting performance, high precision and safe to use. With a plastic case, compact and convenient to carry and store..
Check Stock

Seaboard Air Line Passenger Service: The Streamlined Era

  • Standard Saej844 Air Suspension Horn Train Lowrider Air Brake Tubing 1/4 Air Tube Air Suspension Line 1/4 Pneumatic Tubing.
  • Working Pressure 1mpa.150 Psi Burst Pressure 3 Mpa 435 Psi Working Temperature -40 ℃ ~ +60 ℃ Air Brake Tubing 1/4" Air Hose Nylon Brake Air Line Kit Nylon Brake Line 1/4 Dot Airline Tubing 1/4 Air Brake Line Pnumatic Hose.
  • Pa 12 Nylon Hose. Usage:air Brake System,air Or Fluid Transfer Use With Air Brake Hose 1/4 Dot Tubing.
  • Size:1/4".pipe Thickness 1mm Bending Radius 40mm Air Horn Tubing 1/4 In Air Line.
  • Weight 190gr/10meter.material Polyamide Air Bag Hose 1/4 Air Hose.
Check Stock

High Powered 8KW 72V Electric Car E-Car Brushless Gearless Conversion Kit New

  • Are you tired of your electric trailer brakes not working? Here is the SOLUTION!!.
  • This kit fits on Dexter & Lippert 10,000 lb General Duty Axles commonly found on Kauffman, Big Tex, PJ, Bwise, LoadMax, and other heavy duty trailers. NOTE: Will not work with Rockwell or AL-KO axles!!.
  • The kit includes (2) left-hand & (2) right-hand hydraulic brake assemblies, (1) Hydraulic brake actuator, and (1) tandem axle brake line kit. PLEASE SPECIFY IF YOU HAVE SPRING OR TORSION AXLES OTHERWISE OUR BRAKE LINE KIT OF CHOICE WILL BE INCLUDED!.
  • Brake size is 12-1/4" x 3-3/8" with a 7-bolt mounting plate.These components have passed the CSA Standard CAN3-D313-M85 For Trailer Running Gear. ISO/TS 16949:2002 certified..
  • Brake actuator is a Genuine Dexter product part # K71-650-00. 1,000 PSI..
Check Stock