Top Braided Fuel Line Reviews

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..

Check Stock

3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc

Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16").
Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..

Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....

Check Stock

10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters

【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

Check Stock

EVIL ENERGY 10AN Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE 10FT Black

Application: AN10 braided fuel line widely used as transmission cooler line, fuel return line, fuel supply line, coolant fluid hose, engine cooler line..
Nylon and stainless steel braided fuel line can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel..
Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
Inside Diameter: 9/16". Outside Diameter: 0.78inch. Length: 10 Feet. Please measure before purchase!.
EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
middle layer: 304 stainless steel wire mesh sleeve.
outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..

Check Stock

8AN Fuel Line Kit 16FT with Fittings Nylon Braided 1/2' 16 ft CPE Fuel Oil Hose - Not for PTFE E85

Application: Universal fuel line hose, Such as fuel, lube, alcohol, ethanol, coolant, and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes..
Reliable Material: The fuel line hose based on high-quality stainless steel, aluminum alloy and nylon, it has excellent flexibility and wear resistance. The outer nylon braid has excellent flame resistance and is safe to use..
The fuel line hose Maximum Working Pressure of Braided Steel Fuel Hose (psi): 500 psi. Bursting pressure (psi): 2000psi. Operating temperature range: -40°F to 257°F (-40°C to 129°C). Before buying, make sure that the pressure and temperature range are suitable for your application..
Package Includes: 10pcs 8an rotating hose ends (4 straight, 2pcs 45 degrees, 2pcs 90 degrees, 2pcs180 degrees),2pcs 8an hose separator clamp,1pcs gloves,1/2 braided fuel pipes (length: 16 feet). Hose ID: 0.44 inch (11.13 mm). The outer diameter of the hose: 0.67 inches (17.02 mm)..
Perfect Replacement: Fuel line hose, reliable material can safely replace the original parts, covered with high-quality braided nylon, enhance flexibility and provide a cool racing appearance.

Check Stock

4Pcs 6AN Straight Swivel Hose End Fitting for Fuel Oil Line Aluminum Black (Straight)

Fit for all stainless braided and nylon braided hose,Not fit for PTFE fuel line and rubber fuel line..
Material: T-6061 Lightweight Aluminum Alloy, Anodized Finish for Durability.
Application: Universal,such as:Oil/ Fuel/ Water/ Fluid/ Air Line.
Swivel design for easy assembly,The adjustable AN wrench is highly recommended..
Package include:4X Straight Swivel Fuel Hose End.

Check Stock

Vinco s - OsteoSheath4 - 120 Tablets by Vinco

Package Including: 20 Ft Braided Fuel/Oil/Gas Line Kit(10pcs 6AN hose fitting + 20Ft AN6 Stainless Steel Oil line).
Universal Application: The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas....
Hose Material: Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
The fitting is made of T6061 Aluminum,high strength and good durability..
Working Temperature: -40 F to +248 F. Working Pressure:500 PSI.
Excellently Sealed,100% no leaking .Exchange or return if leak..

Check Stock

3/8 6AN 20FT Fuel Line Hose Kit, Nylon Stainless Steel Braided Fuel Line Oil/Gas/Fuel Hose End Fitting Hose with 10PCS Swivel Fuel Hose Fitting Adapter Kit - Black

Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications..
Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes..
Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
Safety Features For Your Protection: Fuel Hose: Size(ID): 6AN, Length: 20FT, Working Temperature: -100℉ to 500℉ (-73°C to + 260°C) , Pressure Tolerance: 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance..
Package Includes: 1 x 6AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..

Check Stock

MOTAFAR 6AN 45 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

6AN 45 degree hose end fitting is suitable for all oil/ fuel/ water/ fluid/ air line, fit all stainless braided and nylon braided hose, can't fit PTFE fuel line and rubber fuel line.
Max working pressure is 1000psi, working temperature range is -65℉ to 252℉ (-53℃ to 122℃).
Designed for smooth flow, easy assembly, completely reusable, just disassemble and put onto another hose.
No leakage under high pressure and temperature.
Black anodized for durability, great appearance, and anti-corrosion.

Check Stock

6AN 5Feet Stainless Steel Nylon Braided Fuel Line Hose Oil Gas Hose Oil Line Hose Silver

【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
Inner Hose Material: CPE Synthetic Material Hose..
【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..

Check Stock

Mophorn 8AN Fuel Line, 20 Pcs 8AN Fuel Hose Kit, 32.8Ft BK Nylon Stainless Steel Braided Oil Line Hose, NBR CPE Synthetic Rubber AN8 Gas Line, 8AN Universal Fitting Adapter Set with Aluminum Hose End

...is steel fuel line build as standard 8an size, with inside diameter 11.11 mm/ 0.44 in, outside diameter 16.2 mm/ 0.63 in. Working temperature range: -40℉ to 350℉. It is compatible with nearly every substance or agent used. Oil fuel line length: 10 m/ 32.8 ft..
20 Pics Hose End Kit: Each nylon and stainless steel braided oil fuel line kit included 20pcs 8an hose ends (8pcs straight, 4pcs 45 degrees, 4pcs 90 degrees, 4pcs 180 degrees) and 32.8ft braided fuel line. Fitting professionally to manifest its best performance..
Suit for Various Uses: Fuel line widely used in the fuel system, transmission system, cooler system, and pump. It can be worked with racing fuel, pump gas, fuels with ethanol, alcohol-based fuels, motor oil & coolant, etc..

Check Stock