Top Fuel Line Quick Connectors Reviews

Attwood 93038AI7 Primer Bulb for 3.8 inch ID Fuel Line - Not for use in The U.S.A

Fuel line primer bulb is alcohol resistant and suitable for use with leaded or non-leaded fuels. (NOT FOR USE in U.S.A).
Double check valve assures correct fuel flow direction and unrestricted flow..
Barb end fuel hose connectors included and attached with stainless steel hose clamps..
Easy to replace old primer bulbs with common tools. Hose clamps for fuel line on barb connectors required..
Check primer bulb and fuel line periodically for leaks, wear or loss of flexibility. Replace as needed..

Check Stock

Fuel Line Pliers Quick Release Remover Set, 9 inch Fuel Filter Calipers Tools for Auto Removal Fuel Filter Line & 7PCS Air Conditioning Cooling Pipe Hose Circlip Pliers Kit

...asy to grasp, and the jaw has a variety of angles such as 45º/ 90º/ 180º, allowing access to small areas that are difficult to reach. Clamp the jaw on the fuel pipe and remove it easily..
【Wide Application】Fuel Line Disconnect Tool Set used to remove and replace the connectors on the in-line fuel filter. They are suitable for cars of various common brands in daily life,such as Ford/GM /Chrysler/Mazda/Benz/VW/BMW/Audi and can also be used for the connectors of some electrical air conditioning hoses..
【Package Includes】This set includes 3 fuel line hose pliers and 7 different sizes tool to remove/disconnect fittings on fuel lines of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch, a 9 inch fuel filter caliper, a hose pipe clamp clip, 4-in-1 pliers with 45º/ 90º/ 180º, a tool storage bag. It can meet the disassembly and assembly of your daily automobile fuel pipe and air conditioning cooling pipe..

Check Stock

Dorman 801-600 Fuel Line Repair Tech Tray

Cost-effective replacement - saves time and money by replacing only the damaged section. No more difficult manipulation of entire fuel lines.
Steel line to nylon line adapters - allows an old steel fuel line to be repaired with updated nylon line.
Complete tech tray - straight and elbow connectors included to tackle the most popularapplications.
Exclusive features - includes updated tool included for 45°, 90° and 180° connectors.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Check Stock

Five Oceans 3/8 Marine Fuel Line Yamaha Mercury Outboard Fuel Line Boat Fuel Line Hose EPA/CARB Replaces 22-13563A3 22-13563Q3 22-14213M 2214213Q 22-13563Q7 22-13563A7 22-13563A6 22-13563T7

COMPATIBILITY: Fuel line hose connector, female, with 3/8 Inch hose barb for use on Force 40 hp & larger (1993 & newer), 9.9/15/25 hp (1998), and all Mercury/Mariner outboards using clip-on type disconnect at engine end & 3/8 Inch I.D. fuel line. All Yamaha/Mercury Outboards and Mercury Fuel Tank Side - 1 End Replaces Original Mercury (OE) Part #: 22-13563A3, 22-13563Q3, 22-14213M, 2214213Q and 1 End Replaces Original Mercury (OE) Part #: 22-13563Q7, 22-13563A7, 22-13563A6, 22-13563T7.
PACKAGE INCLUDES: Fuel Line Assembly 3/8 Inch Hose 6 Feet Long, a Premium Primer Bulb, 2 Mercury Female Quick Connectors, and 2 Stainless Steel Hose Clamps.
MULTI-LAYER: Low-permeation Primer Bulb 3/8 Inch Hose that provides reliable and efficient priming to help start your boat engine.
FUEL COMPATIBILITY: Primarily used for fuel feed. Compatible with gasoline up to 85% ethanol-blended fuels, diesel, and all bio-diesel blends.
DURABLE MATERIAL: Engineered and designed with marine-grade material. This Fuel line is weather and UV Resistant. Meets USCG type B1-15 SAE J1527 and ABYC Accepted Standards. Reinforce Hose Approved by Environmental Protection Agency EPA and CARB regulations.

Check Stock

Lisle 37160 Disconnect Pliers

Disconnects Fuel Line and EVAP Line Fittings with Tabs that Must be Depressed to Disengage..
Low-profile design with 85° bend allows the tool to fit between the top of the fuel tank and vehicle..
Works great on Delphi two tab connectors and some import vehicles..
Can also be used on some electrical connectors..

Check Stock

Lisle 35070 Button Connector Pliers

Disconnects fuel line, EVAP line and DEF fittings with tabs that must be depressed to disengage..
Works great on Delphi two tab connectors and some import vehicles.
Can also be used on some electrical connectors.
Ratcheting pliers lock in place so two hands can be used to separate connectors.

Check Stock

Hand Fuel Line Outboard Primer Bulb Assembly Kit with Connector for Motor Vehicle Marine Boat 5/16 8mm Fuel Line Hose 6.88FT

Product Material: High-quality rubber balls and 5/16" fuel hose. Compatible with ethanol blended fuel, engineered low-permeability materials can....
Warm Note: Some newer models do not have the facility of an external fuel tank, so these pipelines are not suitable. This is a rubber product, please....
Easy to Use: The fuel hose has a snap-on connector for quick installation and removal of the fuel tank and outboard engine. It is often used as a hand....
Package Includes: 1 x fuel line hose kit, Pls pay attention to whether the connectors are the same before purchasing. Customer Service: If you are....

Check Stock

6.88FT Hand Fuel Line Outboard Primer Bulb Assembly Kit for Motor Vehicle Marine Boat, 3/8' 10mm Fuel Line Hose

Package Includes: 1 x fuel line hose kit, Pls pay attention to whether the connectors are the same before purchasing. Customer Service: If you are disappointed with our fuel hose for any reason, 100% replacement or money back guarantee is within 365 days, please feel free to contact us..
Product Material: High-quality rubber balls and 3/8" fuel hose. Compatible with ethanol blended fuel, engineered low-permeability materials can prevent fuel evaporation, suitable for boats, RVs, tractors and caravans..
Warm Note: Some newer models do not have the facility of an external fuel tank, so these pipelines are not suitable. This is a rubber product, please do not store it in direct sunlight or other harsh environments. Does not work for Evinrude engine..
Easy to Use: The fuel hose has a snap-on connector for quick installation and removal of the fuel tank and outboard engine. It is often used as a hand pump on a ship to provide fuel for outboard engines..

Check Stock

Five Oceans FO4285 Marine Boat Fuel Line, Outboard Fuel Line with Primer Bulb for Yamaha/Mercury, 2 Quick Connectors, 3/8 Inch Hose x 6 Ft, Reinforced EPA/CARB, Compatible Ethanol Blended Fuel

Package Includes a Fuel Line Assembly 3/8 Inch Hose 6 Feet Long, a Premium Primer Bulb, 2 Yamaha/Mercury Female Quick Connectors and 2 Stainless Steel Hose Clamps.
Compatible with All Yamaha/Mercury Engines and Fuel Tank Models (Mercury Before 1998). Meets USCG type B1-15 SAE J1527 and ABYC Accepted Standards. Reinforce Hose Approved by Environmental Protection Agency EPA and CARB regulations.
Multi-layer Low-permeation Primer Bulb 3/8 Inch Hose that provides reliable and efficient priming to help start your boat engine.
Primarily used for fuel feed. Compatible with gasoline up to 85% ethanol-blended fuels, diesel, and all bio-diesel blends.
Engineered and designed with marine-grade material. This Fuel line is weather and UV Resistant. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.

Check Stock

OnReal 7PCS AC Fuel Line Disconnect Tool Set,Includes 1/2 1/4 3/4 3/8 5/8 5/16 7/8 Inch Transmission Line Disconnect Tool for Most Ford/GM/Chrysler/Mazda Car

DISCONNECTS FUEL & AC LINES QUICKLY - Easily disconnect quick connect couplings & fittings on many vehicles. Also fits push lock connectors on radiators and transmission lines..
QUALITY CONSTRUCTION - Chrome-plated zinc alloy steel provides strength and lasting durability..
COMFORT DESIGN - Easy grip handles offer you greater torque. Full metal scissor tools are compatible with most fuel filters..
SIZES - Fuel Line Disconnect Scissor fits 4 sizes: 3/4.

Check Stock

WTMORE Boat Fuel Tank 3 Gallon 12L, Marine Outboard Motor Fuel Tank w/Connector, Compatible with Kayaks, Small/Large Boats, Inflatables and Canoes- Red

...ethylene, low permeability, anti-aging, impact resistance, won't rust, crack or chip, it can naturally rebound without permanent deformation after encountering an impact..
Fuel Up With Ease- Marine portable fuel tank 3 gallon (12 litre) includes 1 pcs fuel line and 1 pcs primer bulb, the fuel hose comes with snap-on connectors to allow quick attachment and removal of boat fuel tank and outboard engine, fuel up with ease. It's perfect for small to large boats, inflatables, canoes and even kayaks..
Scientific Design- I-shaped lifting handle design is more ergonomic. It's light weight compact, easy to carry, easy to stow, durable and strong. The outboard boat motor fuel tank cap has two function, Sealing and Venting. In addition there are separate air inlet and oil outlet, design for prevent oil from spilling..
With Filter- A filter is built into the air inlet of the portable marine fuel tank to ensure clean fuel. Marine outboard motor fuel tank features a fine mesh input spout so you can fill this portable marine fuel tank without worrying about gunk and grime getting in the gasoline..
With Fuel Gauge- Marine fuel tank provides a high contrast fuel gauge to accurately monitor the level of remaining fuel without removing the fuel cap, helps you to clearly u....

Check Stock

Lisle 39210 Main Fuel Line Disconnect

GET THE JOB DONE: The ABN | Master Deluxe AC Line Disconnect Tool Fuel Disconnect Tool Set offers a wide range of tool sizes to separate quick disconnect fittings on oil/fuel lines, heater lines, and AC cooling lines.
FITS YOUR VEHICLE: Fuel line and AC tools for automotive applications are compatible with several Ford, GM, Mazda, and other vehicles with automatic transmission lines.
Measure your application to ensure correct fitment.
EASY TO USE: Each fuel tool is color-coded by size for easy identification.
Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
Release the fuel line locking mechanism by listening for the slight “click” that means that it has done its job for easily removal.
BUILT TO LAST: Each fuel line quick disconnect heater hose disconnect tool is constructed from hard plastic for strength and longevity that resists rust and corrosion.
Spring-loaded fuel line tools design allows to easy opening and spring closing when pressure is released.
PACKAGE CONTENTS: Package contains (6) fuel line pliers transmission tools – Red 5/16-inch (8mm), gold 3/8-inch (9.5mm), dark gray 1/2-inch (13mm), blue 5/8-inch (16mm), black 3/4-inch (19mm), silver 7/8-inch (22mm).

Check Stock

Fuel Line Disconnect Tool Set, 22pcs Master Quick Disconnect Tool Kit for Automotive AC Fuel Line and Transmission Oil Cooler Line, Includes Scissor Type Remover, Compatible with GM Ford Chevy Models

22pcs Master Quick Disconnect Tool Kit for separating automotive ac hose and fuel lines, suitable for a wide variety of domestic and foreign automotive..
The fuel line disconnect tool set is used for most fuel lines, air conditioning lines, radiator and heater hoses, simple push-on & pull-off action, popular sizes 3/16 inch , 3/8 inch , 1/2 inch , 5/8 inch , 3/4 inch and 7/8 inch ..
The fuel line disconnect tool kit is made of aluminum alloy and plastic steel,and this 22pcs fuel air conditioning line disconnect set can stand up to years of use..
The master quick disconnect tool kit for automotive ac fuel line,offset for hard-to-reach areas, fits 5/16 inch , 1/2 inch , 3/8 inch , 5/8 inch , 3/4 inch , 7/8 inch ,4 colored quick ac fuel line quick disconnector 3/8 inch , 1/2 inch , 5/8 inch & 3/4 inch ..
Our transmission line disconnect tool for Ford comes with a heavy-duty blow-molded carrying case,helps to protect and store various parts conveniently.High quality products, 100 percent new.If there is any problem in the process of purchase or use, please contact us to solve i....

Check Stock