Top Borla Mufflers Reviews

NEW FLOWMASTER SUPER 10 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,3.00" CENTER OUT,BLACK FINISH

  • Brand New Flowmaster Super 10 Series Chambered Muffler, 3.00" Center In, 3.00" Center Out, Black Finish (Holley Part #843015).
  • Super 10 Series 409S stainless steel, single chamber mufflers. Intended for customers who desire the loudest & most aggressive sound that they can find. Because these mufflers are so aggressive, they are recommended only for off highway use & not for street driven vehicles..
  • These mufflers utilize the same patented Delta Flow technology that is found in other Flowmaster Super series mufflers to deliver maximum performance. Constructed of 16 gauge 409S stainless steel & fully MIG welded for maximum durability..
  • Features: Intended only for off-road or race applications | Delta Flow Technology | 409SS Stainless Steel Construction | Super 10 Sound Level.
  • NOTE: Universal Muffler - Some adaptation may be required..
Check Stock

BORLA 140680 Exhaust System

  • Borla 140680 S-Type Cat-Back Exhaust System.
  • Incl. Front Pipe Assy/Muffler Assy/Tailpipe Assy/Polished 4 in. Single Round Rolled Angle-Cut Tip.
Check Stock

Maja Soap 3 Pack Rectangular 3.1 Oz Ladies Other

  • Maja Classic Gift Set Bath Gel 13.5oz and Body Lotion 13.5oz.
Check Stock

Titan '16-'19 5.6L V8 At 2+4Wd 4Dr

  • Single Round Rolled Angle-Cut Black Tips.
  • The BORLA S-Type sound level is specifically tuned for performance and sound on the Nissan Titan’s.
Check Stock

Speedway 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2.5" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Speedway 2.25" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

  • Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
  • Each tube is expanded on one end to allow easy slip fit installation.
  • 2-1/4" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
  • Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.
Check Stock

Borla 140017 Corvette Cat-Back 'S-Type' System Exhaust

  • Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses.
  • BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque..
  • Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles..
  • Includes a split rear exit single round rolled angle-cut Phantom tip.
Check Stock

Borla 140038 Cat-Back 'S-Type' System Exhaust

  • Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses.
  • BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque..
  • Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles..
  • Includes split rear exit dual round rolled angle-cut tip.
  • Quality materials and craftsmanship for ultimate performance.
Check Stock

Borla 140067 Cat-Back 'S-Type' System Exhaust

  • Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses.
  • BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque..
  • Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles..
  • Includes a split rear exit single round rolled angle-cut tip.
  • Quality materials and craftsmanship for ultimate performance.
Check Stock

Delkevic Stubby 14" Stainless Steel Oval Muffler

  • This is a slip on muffler and is not bike specific. We manufacture 300+ motorcycle specific pipes, we do not guarantee this muffler fits any specific model. Please search our products for bike specific fitment..
  • Delkevic Stubby 14" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel polished to a mirror finish. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Borla 40944 XR-1 Stainless Steel Sportsman Racing Oval Muffler, 3"

  • Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses.
  • BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque..
  • Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles.Overall Length:22 inch.
  • Inlet Diameter: 3" Outlet Diameter: 3" Case Size: 16"x4 1/2"x7 7/8".
Check Stock

Delkevic Aftermarket Exhaust compatible with Yamaha FJR1300 13.5" Titanium XOval Muffler Slip On 01-05

  • Delkevic 13.5 inch *Stubby* x-oval titanium mufflers are made from high grade titanium. Along with adding a unique style and look, these mufflers are extremely lightweight,higher performance, and more durable than factory standard exhausts. They create a deep, crisp sound..
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Carbon Fiber Oval Muffler

  • Delkevic 18" carbon fiber oval mufflers are manufactured from a pre-formed carbon fiber composite sleeve and 304 stainless steel. This muffler has the quietest, deepest tone of mufflers we offer. This will be the closest sounding to stock available and best for long haul trips..
  • This set includes all necessary hardware to mount the muffler onto the engine..
  • No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
  • Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..
Check Stock