Top Chambered Mufflers Reviews

NEW FLOWMASTER SUPER 44 SERIES CHAMBERED MUFFLER,3" CENTER INLET & OUTLET,BLACK

Brand New Flowmaster Super 44 Series Chambered Muffler, 3" Center Inlet & Outlet, Black (Holley Part #943045).
Flowmaster Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing 4" case street muffler we have ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability..
Features: Deep Aggressive Sound Exhaust Note | Noticeable interior resonance | Recent 2 chamber improvement | Race proven Delta Flow technology.
NOTE: Universal Muffler - Not a direct fit. Some adaptation required..

Check Stock

Exhaust Muffler 2.5 Exhaust Tip 2.5x2.5x13 2.5 Inch Center Dual Offset Inlet/Outlet - 7 Oval Body Length Aluminized Steel

7" Muffler Body Length, 13" Overall Length, 2.5" Muffler dual Inlet And Outlet Diameter.
Material: Aluminized Steel.Aluminized steel has a protective function, corrosion resistance and heat resistance..
Function:It increased throttle response, giving your car more air flow..
Advantage: Chambered mufflers are designed to produce a deep throaty rumble and muffle exhaust noise.
Super aggressive deep sound level, intended for off-road or race applications.

Check Stock

NEW FLOWMASTER SUPER 44 SERIES CHAMBERED MUFFLER,3.00" CENTER IN,2.50" DUAL OUT,BLACK FINISH

Brand New Flowmaster Super 44 Series Chambered Muffler, 3.00" Center In, 2.50" Dual Out, Black Finish (Holley Part #9430452).
Flowmaster Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing 4" case street muffler we have ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability..
Features: Race proven Delta Flow technology | Recent 2 chamber improvement | Noticeable interior resonance | Deep Aggressive Sound Exhaust Note.
NOTE: Universal Muffler - Some adaptation may be required..

Check Stock

Delkevic US Forestry Approved Spark Arrestor for 13" and longer Delkevic Oval and Tri-Oval Mufflers

Compatible with Delkevic street bike mufflers.
Fits first generation 13" tri-oval mufflers with turn down outlet. Does not fit tapered end cap..

Check Stock

Uncle Mike's Butler Creek Plug 12/20 Shotgun 2.75/3" 50001 , Black

Fits most 12-, 16- and 20-gauge pumps and autos Chambered for 2 1/2", 2 3/4" and 3" shells.
Fits most 12-, 16- and 20-gauge pumps and autos chambered for 2 1/2", 2 3/4" and 3" shells.

Check Stock

Speedway 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
Each tube is expanded on one end to allow easy slip fit installation.
2.5" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.

Check Stock

Speedway 2.25" Mild Steel DIY Custom Mandrel Exhaust Pipe Bend Kit w/Mufflers

Premium 16-gauge steel construction of both tubing and mufflers to provide long lasting performance.
Each tube is expanded on one end to allow easy slip fit installation.
2-1/4" mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
Two chamber mufflers with twin baffles to reduce drone and interior noise while maintaining a deep powerful tone.
Mufflers are offset inlet and center outlet configuration to fit a variety of muscle car and hot rod applications.

Check Stock

Delkevic Stubby 14" Stainless Steel Oval Muffler

This is a slip on muffler and is not bike specific. We manufacture 300+ motorcycle specific pipes, we do not guarantee this muffler fits any specific model. Please search our products for bike specific fitment..
Delkevic Stubby 14" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel polished to a mirror finish. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..

Check Stock

Delkevic Aftermarket Exhaust compatible with Yamaha FJR1300 13.5" Titanium XOval Muffler Slip On 01-05

Delkevic 13.5 inch *Stubby* x-oval titanium mufflers are made from high grade titanium. Along with adding a unique style and look, these mufflers are extremely lightweight,higher performance, and more durable than factory standard exhausts. They create a deep, crisp sound..
This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..

Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Carbon Fiber Oval Muffler

Delkevic 18" carbon fiber oval mufflers are manufactured from a pre-formed carbon fiber composite sleeve and 304 stainless steel. This muffler has the quietest, deepest tone of mufflers we offer. This will be the closest sounding to stock available and best for long haul trips..
This set includes all necessary hardware to mount the muffler onto the engine..
No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..

Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with 18" Stainless Steel Oval Muffler

Delkevic 18" stainless steel oval mufflers are manufactured from high-grade 304 stainless steel and polished to a mirror finish. This muffler is has the deepest, quietest tone of mufflers we offer. It will be the closest sounding to stock and the best choice for long haul trips..
This set includes all necessary hardware to mount the muffler onto the engine..
No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..

Check Stock

Delkevic Aftermarket Slip On compatible with Honda ST1300 (2003-2015) with DL10 with Stubby 14" Carbon Fiber Round Muffler

Delkevic DL10 14" carbon fiber round mufflers are manufactured from a pre-formed composite carbon fiber sleeve and 304 stainless steel. These mufflers give a decent increase in sound over the stock muffler but can be fairly quiet in lower RPM..
This set includes all necessary hardware to mount the muffler onto the engine..
No rejetting or remapping is required after fitment on a stock bike however we always recommend a dyno test. If the motorcycle has other modificaitons to the intake or exhaust system some tuning may be required..
Delkevic mufflers are handcrafted from the finest quality materials to enhance your motorcycle in both performance and looks..

Check Stock

Permatex 80335 Muffler and Tailpipe Sealer, 3 oz.

Seals holes and leaks in mufflers, tailpipes and around joints.
Temperature Range: up to 2000°F (1000°C).
Suggested Applications: Mufflers, tailpipes, joints, and catalytic converters.
exhaust system must be cool before applying.

Check Stock