Top Bipolar Stepper Motor Reviews

DEVMO 5pcs DRV8825 Stepper Motor Driver Module with Mini Heat Sink for 3D Printer Accessories Compatible with RepRap 4 RAMPS 1.4 StepStick

  • ★The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is a breakthrough..
  • ★Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step..
  • ★Simple step and direction control interface..
Check Stock

Usongshine Stepper Motor Driver TB6600 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Phase Hybrid Stepper Motor for CNC/42 57 86 Stepper Motor（1 pcs

  • Package included: 1 x Stepper Motor Driver..
  • ✿Stepper Motor Driver✿: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • ✿The largest 32 subdivision of the 6 models are optional.
  • Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper....
  • ✿Protect form✿: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection, under voltage....
  • ✿Suitable for a wide range of stepping motors of Nema 17, 23 and 24 can used in various kinds of machines, such as X-Y-Z tables, labeling machines,....
Check Stock

STEPPERONLINE Nema 34 Stepper Motor 8.5Nm(1203.94oz.in) 6.0A 14mm Key-Way Shaft with 1m Cable

  • NEMA 34 bipolar 2 phase stepper motor wihr 4-lead.
  • Holding Torque: 8.5Nm(1203.94oz.in), Rated Current/phase: 6.0 A, Voltage : 36-60VDC.
  • Application: The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser CNC machine, automation devices.
Check Stock

STEPPERONLINE Nema 34 Stepper Motor 4.8Nm(679.87oz.in) 6.0A 14mm Key-Way Shaft with 1m Cable

  • NEMA 34 bipolar 2 phase stepper motor wihr 4-lead.
  • Holding Torque: 4.8Nm(679.87oz.in), Rated Current/phase: 6.0 A, Voltage : 36-60VDC.
  • Application: The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser CNC machine, automation devices.
Check Stock

5pcs A4988 StepStick Stepper Motor Driver Module + Heat Sink for 3D Printer RepRap

  • This stepper motor driver lets you to operate bipolar stepper motors in full-, half-, quarter-, eighth-,and sixteenth-step modes, with an output drive....
  • There are no phase sequence tables, high frequency control lines, or complex interfaces to program..
  • The A4988 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened..
  • The translator is the key to the easy implementation of the A4988. Simply inputting one pulse on the STEP input drives the motor one microstep..
  • This product is a breakout board for Allegro¡¯s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection.
Check Stock

Nema17 42 Stepper Motor 40mm 64oz.in 45Ncm 1.7A 1.8 Degree 2phase with 1M 4-pin Cable& Connector for 3D Printer Hobby CNC Router Engraving Milling Machine 17HS4401J

  • It with 1.8°± 5%step angle (200 steps/revolution) Phase:2.
  • Product Dimensions: 1.6 x 1.5 x 1.6 inches.
Check Stock

5Pcs Nema 17 Stepper Motor 40mm 64oz-in 45Ncm 1.7A 1.8 degree 2 phase with 1M 4-pin Cable & Connector Bipolar 42 stepping motor for 3D Printer Hobby CNC Router Machine 17HS4401J

  • It with 1.8°± 5%step angle (200 steps/revolution) Phase:2.
  • Product Dimensions: 1.6 x 1.5 x 1.6 inches.
Check Stock

RAMPS 1.4 Controller + MEGA2560 R3 Board + 5pcs Soldered A4988 Stepper Motor Drivers + 5pcs Heat Sinks + 19pcs Jumpers with USB Cable for RepRap 3D Printer Kit

  • SAVING SPACE: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package. So it can save space and cost..
  • SCALABLE: RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion. A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • EASY TO USE: Using the bootloader, you can download the program directly via USB without using other external writers. Development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works..
  • MODULAR DESIGN: The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
  • POWER SUPPLY AND DRIVER: Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil..
Check Stock

STEPPERONLINE 5:1 Planetary Gearbox Nema 17 Stepper Motor 1.68A for DIY CNC Robot 3D Printer

  • Bipolar Stepper, Holding Torque: 1.68 Nm , Rated Current/phase : 1.68A , Recommended Voltage: 12-24V.
  • Frame Size: 42 x 42 mm/ 1.65" x 1.65" , Motor Length: 40 mm / 1.57" , Gearbox Length :27.3 mm / 1.07".
  • 4-wires (Black, Green, Blue, Red) , Weight: 460g.
Check Stock

FYSETC 3D Printer Parts Stepstick Mute TMC2209 V3.1 Stepper Motor Driver UART Mode with Heatsink for Reprap Ram1.4 MKS Gen/SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 Control Motherboard-5Pcs

  • TMC2209 V3.1: ultra-silent motor driver, 2020 New Version, compatible to a number of legacy drivers as well as to the TMC2208, Support UART mode, compatible with popular motherboards such as FYSETC S6/F6, MKS SGENL, MKS GENL v2.0, MKS Robin E3D, SKRv1.3/1.4. Heat sink color is random: Blue or Black..
  • Upgrade Tips: add CLK pin, not connect in default, tie to GND via 0R.
  • SPREAD pin is floating. Reserve pull-up and pull-down resistors. Move TX from 3 to 5..
  • Advantage 1: StallGuard for sensorless homing. The integrated power MOSFETs handle motor currents up to 2A RMS with protection and diagnostic features for robust and reliable operation. A simple to use UART interface opens up tuning and control options. Store application tuning to OTP memory..
  • Advantage 2: Industries’ most advanced STEP/DIR stepper motor driver family upgrades designs to noiseless and most precise operation for cost-effective and highly competitive solutions..
  • Advantage 3: Step/Dir Drivers for Two-Phase Bipolar Stepper Motors up to 2.8A peak –StealthChop for Quiet Movement – UART Interface Option –Sensorless Stall Detection StallGuard4..
Check Stock

MYSWEETY TB6600 4A 9-42V Stepper Motor Driver CNC Controller, Stepper Motor Driver Nema tb6600 Single Axes Hybrid Stepper Motor for CNC

  • 9V-42V DC power supply, H bridge bipolar constant phase flow drive.
  • The maximum 4.0A of the eight kinds of output current.
  • The largest 32 subdivision of the 6 models are optional.
  • Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection..
  • Can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode..
Check Stock

Stepper Motor Mounting Bracket, 6pcs Steel Motor Mounting Nema17 Bracket, with Mounting Screws

  • Mounts are thick 2mm metal bent into an L shape. spot-welded 2 little triangle-shaped wedges in the corners. Ideal for replacement applications..
  • Stepper motor bracket durable alloy steel provides strong bearing pressure when printing..
  • Nema17 brackets are 2 long slots so you could easily loosen screws, tighten the belt tension of the motor and belt, and tighten them back down easily..
  • Stepper motor alloy steel mounting bracket can match standard Nema 17 stepper motor, and also include the mounting holes for Nema 17 economy planetary geared stepper motor but not for high precision planetary geared stepper motor..
  • 6 pcs of NEMA 7 stepper motor mounting brackets, 90 degrees L-shaped bracket there are 4 holes drilled to mount for 3D Printer Motors Nema 17 Stepper Motor 42-40 Motor..
Check Stock

18/4 AWG Shielded CNC Wire (50FT) — Flexible Stranded Shielded 18-Gauge 4-Conductor Cable for Stepper Motors, CNC Machines, NEMA Motors, VFD Spindles, CNC Routers, 3D Printers and more!

  • RESILIENT & FLEXIBLE: Stepper motor cable designed to bend smoothly in your CNC or 3D printer chain!.
  • SHIELDED 4 CONDUCTOR WIRE: Reduce interference for your CNC spindle motor or stepper motor driver!.
  • BEST RESULTS: Shielded wire means higher quality for your 3D Printer, CNC Machine or CNC Controller..
  • GREAT FOR All STEPPER MOTORS: Nema 17 Stepper Motor, Nema 23 Stepper Motor, Stepper Driver, & more!.
  • STEPPER MOTOR WIRE: The perfect upgrade to any CNC Kit, CNC Router Kit, or CNC Stepper Motor Kit..
Check Stock