Top Balanced Output Reviews

Rockville REQ215 Dual 15 Band 1/3 Octave Graphic Equalizer with Sub-Output

  • The Rockville REQ215 is a Dual Channel 30 Band (15 bands per channel) rack mountable EQ. Dual channel (15 bands per channel). Switchable 12 Band or 6dB boost/cut range..
  • 80Hz 24dB low cut filter. 2/3 octave filter sets. 25 Hz to 16 kHz effective equalization range. Constant Q filters. Output level LEDs (-12 to +17 dB). Low cut filter switch with status LED..
  • XLR inputs and outputs for balanced operation. Bypass switch with status LED. Balanced XLR input/output. Subwoofer out. Subwoofer X-Over Freq ( 30Hz - 200Hz ) selecting..
  • Connectors : XLR balanced inputs and outputs. Ground lift switch. Frequency Centers : 31.5 Hz, 40 Hz, 63 Hz, 100 Hz, 160 Hz, 250 Hz, 400 Hz, 500Hz, 630 Hz, 800 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz..
  • Input Impedance : 20k ohms. Output Impedance : 1.5k ohms. Maximum Output Level : 11 VAC. Level Control : +/- 12 dB. Signal to Noise : 90 dB. Distortion : 0.03%. Power : 120 Volt..
Check Stock

Fairfield Circuitry The Accountant

  • No integrated circuits in the signal path Transformer-balanced input and output Selectable output transformer loading resistors by an internal T4-style electro-optical attenuator Very simple to operate with only two main controls, Gain and Peak Reduction A big meter shows gain reduction or output level at two different reference levels Hardwire bypass switch for easy comparisons XLR and TRS input and output jacks for flexible connections Link jack and switch for conne.
  • The COMP-3A is a single-channel vintage-style Compressor/Leveler.
  • The signal path uses only discrete components like resistors, capacitors and transistors, and the input and output is transformer balanced using two different transformers, each one optimized for its purpose.
  • This is the way audio components were built before integrated circuits became available.
  • Integrated circuits are small and cheap and widely used in most modern designs.
Check Stock

HIFIMAN EF400 Desktop Balanced Headphone DAC& Amplifier with Himalaya R2R DAC, 3.5/4.4/6.35mm Output for Home Audio

  • ...pment. The HIMALAYA DAC module supports the standard PCM music signal transmitted by the most common IIS (Integrated Interface of Sound) audio interface, with a maximum resolution of 24Bit..
  • Full Balance: The four-channel differential structure features a DAC, buffer and active filter that add up to unbeatable fully balanced output for stunning performance from a Class AB DAC/amplifier. The four-channel fully differential amplifier circuit features a maximum output of 10.7 Vrms (THD.
  • 4-level Function Switch: High Gain NOS, High Gain OS, Low Gain OS, Low Gain NOS ★Headphone Out (Front Panel): 6.35mm Single-ended.
  • XLR 4-Pin Balanced Output. ★Line Out (Rear Panel): CANNON Balanced Output.
  • RCA (Single-ended).★ Input: USB Type C.
Check Stock

Blackmagic Design Mini Converter - Analog to SDI

  • Analog to SDI Conversion: Use this device to convert analog video sources to SDI video output.
  • Embedded Audio: This unit can embed SDI audio from balanced AES/EBU or analog audio inputs.
  • og to SDI Conversion: Use this device to convert og video sources to SDI video output.
  • Embedded Audio: This unit can embed SDI audio from balanced AES/EBU or og audio inputs.
  • It will accept an HD/SD component, NTSC, PAL, or S-video signal and convert it to an SDI output.
Check Stock

Topping D10 Balanced USB Converter TRS/XLR/Opt/Coax Output ES9038Q2M DSD256 HiFi Decoder Digital to Analog Converter Home Audio DAC (Black)

  • ★ The Difference: D10 Balanced is a supplement to D10s, the two are in a coexistence relationship, the method of use is same.
  • D10s is for Single-ended applications, D10 Balanced is for Balanced applications. (NOTE: The balanced output of D10 Balanced does not support any adapter convert to the single-ended.).
  • ★ USB Interface Application: If you already have a better DAC, you can connect D10 Balanced's coaxial/optical output to your DAC,then D10 Balanced serve as a USB bridge..
  • ★ Audio Format & Sampling Rate indicator: D10 Balanced is compatible with 16-32bit/44.1-384KHz and DSD64-DSD256 Native.
  • It can accurately indicate the audio format(PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night..
  • ★ D10 Balanced supports professional ASIO applications. It can be set in the music playback software.
  • When using ASIO with Windows, you can use the customized driver from Thesycon..
Check Stock

Matched Pair 7-Pin GE JAN 5654W Vacuum Tubes Upgrade for 6AK5/6J1/6Ж1/ EF95/6J1P

  • About Tube + Transistor Hybrid amplifier： Front tube amplifier and rear transistor combine the advantages of two amplifier circuits to achieve the....
  • Tube Amplifier ：Adopt four 6J1 tubes for pre amp, making voice sweet and exquisite..
  • Transistor for Class-A amplifier： Adopt transistors for class A buffer, output power up to 2000mW, can easily drive many kind headphones..
  • XLR and 4. 4mm balanced input/output： It has XLR and 4.4mm balanced input, 4-pin XLR and 4.4mm balanced output, rich and diverse interfaces,....
  • Built-in Mute Circuit： It built-in relay for mute circuit when turn on amplifier to avoid POP noise and make sure the tube is worked at its best....
Check Stock

Rockville RockMix 4 USB Computer Recording Interface/EQ 4-Channel Pro Mixer

  • ... channels 1 & 2 for use with condenser microphones, Channel 1 and Channel 2: XLR and ¼” TRS combo input jacks, Channel 2: mic/instrument level switchable allowing you to connect a mic, instrument, or any other audio device,.
  • Stereo channel 3 and 4 have ¼” inputs (balanced or unbalanced), CH3 & CH4 with GAIN switch and LEVEL control, Independent Level Controls for Main and Headphone/Monitor Outputs, Integrated Plug-and-Play USB Audio Interface for Mac & PC, Operates on USB BUS Power or 5V DC External Power Supply (Included), 3.5mm aux input jack for sound effects or background music, Low power consumption means you can power the mixer from the USB of your laptop or by plugging it into an outlet.
  • Super mini 4-channel mixing console designed for home studio recordings or live broadcast streaming, (2) headphone outputs (¼” and 3.5mm), ¼-inch TRS Stereo Output, ¼” Stereo Monitor Output, Additional 3.5mm mic input allow you to connect an additional microphone to channel 1, Channels 1 and 2 each have a 2-band EQ and Pan controls and gain controls,.
  • TO PC slide switch allows you to select which channels get....
Check Stock

Topping D10 Balanced USB Converter HiFi Converters TRS/XLR/Opt/Coax Output ES9038Q2M XMOS XU208 PCM384KHz DSD256 Digital to Analog Converter Home Audio DAC (Black)

  • ★ The Difference: D10 Balanced is a supplement to D10s, the two are in a coexistence relationship, the method of use is same.
  • D10s is for Single-ended applications, D10 Balanced is for Balanced applications. (NOTE: The balanced output of D10 Balanced does not support conversion to single-ended (RCA) in any way..
  • ★ USB Interface Application: If you already have a better DAC, you can connect D10 Balanced's coaxial/optical output to your DAC,then D10 Balanced serve as a USB bridge..
  • ★ Audio Format & Sampling Rate indicator: D10 Balanced is compatible with 16-32bit/44.1-384KHz and DSD64-DSD256 Native.
  • It can accurately indicate the audio format(PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night..
  • ★ D10 Balanced supports professional ASIO applications. It can be set in the music playback software.
  • When using ASIO with Windows, you can use the customized driver from Thesycon..
Check Stock

Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer with Sub-Output, Grey

  • Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer With Sub-Output. Dual channel (31 bands per channel). Variable stage low and high cut filters..
  • 1/3 octave filter sets (ISO centers). 20 Hz to 20 kHz effective equalization range. Constant Q filters. Selectable 6dB or 12dB cut or boost range. Output level LEDs (-10 to +17 dB)..
  • Bypass switch with status LED. Balanced XLR input/output. Subwoofer out. Channels: 2 (stereo). Connectors: XLR balanced inputs and outputs. Bands: 31 per channel..
  • Frequency Centers: 20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz, 250 Hz, 315 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1 kHz, 1.25 kHz, 1.5 kHz, 2 kHz, 2.5 kHz.
  • Control Range: Selectable +/-12dB 0r +/-6dB. Input Impedance: 50k ohms. Output Impedance: 600 ohms. Maximum Output Level: +21dBLevel Control: +/- 10 dB. Signal to Noise: 003e93 dB. Distortion: 0.005%..
Check Stock

Aguilar Tone Hammer 500-Watt Bass Amplifier Head

  • 500 watts into 4 ohms, 250 watts into 8 ohms.
  • Fully adjustable, Drive Control featuring Aguilar’s proprietary AGS(adaptive gain shaping) circuit..
  • Balanced Output: XLR balanced output with pre/post EQ and ground lift switch.
  • One 1/4 Inch input jack, compatible with all active and passive basses.
Check Stock

FiiO AM3 Balanced Output Headphone Amplifier Module for X7 Portable High-Resolution Audio Player, Titanium

  • ...ared to the original, output power is increased by 225% up to 3000mW per channel with a lower output impedance – allowing it more effortlessly power all kinds of headphones..
  • [Desktop-level connectivity]: The M17 mp3 player features : 3.5mm output: headphone out/line out.
  • 4.4mm output: balanced headphone out/balanced line out.
  • RCA coaxial port: coaxial input and output.
  • USB 3.0 port: supports USB Host and Device modes, can be used for high-speed data transfers and fast charging.
  • USB 2.0 port: supports USB Host mode, allowing external DACs or hard drive storage to be connected..
  • [Desktop-tier heat dissipation]: With exceptional audio quality comes with large power consumption, so effective heat dissipation was a large focus when designing the M17 music player. Not only are "H" type heat dissipation and VC liquid cooling technologies adopted, the bluetooth mp3 player M17's 151g unibody aluminum alloy frame also effectively transfers heat out of the device. Finally, the cooling fan stand also further makes sure heat is rapidly transported away..
  • [Desktop-quality power supply]: The M17 desktop mp3 player contains two power supplies – a battery power supply and a power supply powered by e....
Check Stock

POWER ACOUSTIK BAMF1-5000D BAMF Series Monoblock Class D Amp (5,000 Watts...

  • Bass Restoration with Lighted Display, Illuminaited Logo Plate and Chrome Finish. Eyes Light up with Red LED's.
  • Max.Bass Control with Dash Mount Remote Control for PFM Subsonic Filter & Bass Level Control.
  • Balanced Inputs, Bass Output Control with PWM High Head Room Power Supply.
  • Output Level: 13.5 volts, Frequency Response: 10Hz - 100KHz.
  • THD: 0.002%, S/N Ratio: 132dB, Balanced Input Noise Rejection: 60 dB.
Check Stock

Topping D30 Pro 4*CS43198 Chip DAC Hi-Res Audio DSD256 PCM384kHz XMOS XU208 Preamplifier RCA XLR USB Optical Decoder Black

  • The THD+N of D30Pro is no higher than 0.00009%， which means the D30Pro accurately restores 99.99991% of the original sound.
  • The 4 x CS43198 provide a total of 8 full balanced channels. So each channel of the D30Pro will be arranged in parallel by 4 conventional balanced....
  • USB support DSD256 & PCM384k Hz high resolution audio :D30Pro uses 2nd generation 8 core XMOS XU208, USB supports up to PCM32bit 384kHz and DSD256....
  • D30Pro has full balanced XLR output and single ended RCA output. You can choose "XLR only" , “RCA only” or“XL R+RCA” output to meet different....
  • CPLD focusing on clock processing and digital signal optimization, restoring what the digital signal should be..
Check Stock