Top Auto Solenoid Switch Reviews

mistcooling 250 PSI Misting Pump

  • 250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
Check Stock

TOPEND Dump Trailer Solenoid- Intermittent Duty Solenoid Relay- for Part Numbers SAZ4201GJ 7522 SAZ-4201ER 070009 190107 KTI Unit KTI 391-2-C (12 V 4 Terminal 100 Amp)

  • 【High Quality】Intermittent Duty Solenoid is made of tough plastic and durable copper, Coil Roll is using 180℃ copper wire, which allows it to be used in the harshest environmental conditions, protects against dust and water jets, dust& liquid resistant, anti-rust and corrosion. 100% OEM Match and Replacement..
  • 【OEM Parts Number】Solenoid Switch Replaces Part Number: Prestolite SAZ-4201GJ 7522 SAZ-4201ER Monarch/Bucher 07522 IRON BULL Dump Trailer Solenoid Also suitable for pj dump trailer with KTI system OEM Part# 190107.
  • 【Parameter】OEM Replacement Switch Solenoid Fits Prestolite, Monarch/Bucher, Continuous Amps 100, 12v, 4 Terminals, Intermittent, Surge Amps 200..
  • 【Application】This 4 terminal solenoid is commonly used by hydraulic dump trailer manufacturers (eg Load Trail, Parker Performance). It works on power up / power down dump trailers.It can also replace the solenoid valve of the hydraulic leveling jack on the motorhome. Also common on many other brand dump trailers..
  • 【replacement】 Dump trailer solenoid Genuine....
Check Stock

12V 250A Winch Solenoid Relay Contactor Thumb Truck for ATV UTV 2000-5000lbs Winch with 6 Protecting Caps - Ovsor

  • 【PRODUCT PARAMETER】- Voltage - 12V, power – 250A, capacity - 2000-5000lbs, for ATV Winch Solenoid Relay Contactor Switch 12V 250 AMP 1500lb-5000lb Application..
  • 【HIGH QUALITY】 - Made of strong, weather-resistant steel and powder-coated black surface, with super durability. OEM of high quality KFI winch kit is a great alternative to replace contactor..
  • 【MULTIFUNCTIONAL APPLICATION】- For ATV Winch Solenoid Relay Contactor Switch 12V 250 AMP 1500lb-5000lb Application. Direct Replacement for UTV ATV Winch Solenoid Relay Contactor Switch 12V 250 AMP..
  • 【INSTALLATION GUIDE】- Easy to install. The two wires - Green and Black which go to the switch that controls In and Out on a winch. Blue and yellow go to motor, Black and red go to battery..
  • 【AFTER-SALES SERVICE】- If the product fails or other problems, you can contact us at any time, we will solve the problem for you within 12 hours..
Check Stock

2pcs Transmission Pressure Switches for Acura 28600-P7W-003 28600-P7Z-003

  • 100% brand new aftermarket Transmission Pressure Switch with premium quality.
  • Including 1pc 33PSI(black) Solenoid switch and 1pc 27PSI(beige) Solenoid switch.
  • Each transmission switch are engineered and tested to meet or exceed OEM standards and performance.
  • Replacing OE number for reference: 28600-P7W-003, 28600-P7Z-003.
  • Directly fit in and easy to install, fit for Honda & Acura.
Check Stock

Winch Solenoid Relay 12V ATV Winch Solenoid Relay Contactor & Winch Rocker Switch Set Fits for ATV UTV Truck

  • Fitment: for ATV Winch Solenoid Relay Contactor Switch 12V 250 AMP 1500lb-5000lb.
  • Replace Part NO. : 63070, 62135, 74900, 2875714, 70715.
  • Specification: Voltage: 12V, Power: 250A, 1500-5000lbs Capacity.
  • Applications: For 12 volt solenoid operated winches: for 4x4 vehicles, ATV's, UTV's, SUV's and Others.
  • Package Includes: 1 x 12V Winch Solenoid Relay Contactor, 1 x Winch Contactor Rocker Thumb Switch, 1 Set of Mounting Brackets, 6 x Insulated Protecting Waterproof Caps.
Check Stock

12V Winch Solenoid Relay Contactor & Winch Rocker Thumb Switch Combo with Handlebar Control Kit Compatible with ATV UTV 1500lb-5000lb Polaris 800 1000

  • COMPATIBLE WITH - All winch solenoid 12v: 4x4 vehicles, ATV's, UTV's, SUV's, Jeep's, and most brands of recovery winches | Others like 12 Volt Trailer, hydraulic pump, lift jack etc..
  • OEM REFERENCE - 63070, 62135, 74900, 2875714, 70715 | Voltage: 12V, Power: 250A | Replacement Contactor for Polaris, KFI, WARN, RAMSEY, HONDA, SUPERWINCH, MILE MARKER, MASTER LOCK, CYCLE COUNTRY, CHAMPION, SMITTYBILT etc. Models, work with most brands of ATV/UTV warn winch solenoid | Please see the detailed fitment below..
  • UPDATED VERSION ACCESSORIES - Easy installation, The atv winch switch kit fixed parts of the new version of the product have been assembled, no need for the buyer to assemble it again, just install the winch switch rocker atv according to the instructions..
  • QUALITY ASSURANCE - Made of solid and weather resistant steel and powder coated black surface for great durability, exceeding original OE standard | 100% test before shipping. Direct Replacement for 12V 250 AMP ATV Winch Solenoid Relay Contactor and Switch | Comes with detailed instructions for easy installation. Great choice to replace the broken....
Check Stock

AlveyTech 4-Pin, 2-Wire Battery Wiring Harness for Razor Scooters

  • ☆High quality and complete electrics all wiring harness wire loom assembly for GY6 125cc 150cc ATV / QUAD.
  • ☆Fits almost all years Chinese made electric start upright engine GY6 125cc 150cc ATV / QUAD / Coolster / Go Kart / 4 wheelers / Scooter / buggy / Motowork & more.
  • ☆ Easy to plug in design Wiring Harness, which is very handful and practical for rewiring job.
  • ☆High quality Wiring Harness, Kill Light Switch, Ignition Coil, CDI, Rectifier, Ignition Switch, Starter Solenoid Relay, Spark Plug are included. All parts are tested before sale.
Check Stock

Engine Wire Loom Wiring Harness for GY6 125cc 150cc 250cc Scooter Quad Bike ATV Buggy Go Kart Dune

  • Starter Solenoid Relay + Starter Motor for GY6 4-Stroke ATV Dirt Bikes Pit Bike Scooters Go Kart Moped Quad 4 Wheelers Buggys 50cc 150cc 200cc 250cc Engine. Compatible with Tao tao SUNL Coolster Baja Roketa Icebear Jonway GY6 engine parts replacement..
  • Starter Solenoid Relay for 4-Stroke GY6 Engine 50cc 150cc 200cc 250cc ATV Dirt Bikes Scooters Go Kart Dne Buggys Quad 4 Wheelers Pit Bike Moped Roketa SSR Taotao Sunl Coolster..
  • Motor Starter for GY6 125cc 150cc Scooter ATV Moped Go Karts Quad 4 Wheelers Taotao SUNL Baja Icebear Roketa Jonway.
  • GY6 Motor Starter For 152QMI 157QMJ engine motor. 12V / 9 Teeth / CW Rotation..
  • Starter Solenoid Relay,Starter Relay Solenoid also works with Honda Clones 50cc, 70cc, 110cc, 125cc, 250cc etc. GY6 Starter Solenoid Relay Replace oem part number: 35850-286-007,35850-286-027,35850-286-017,35850-375-000. High cranking power,reduce startup switch electric current.
  • High quality material,efficient and durable..
  • 4 Stroke Engine Parts GY6 150cc starter motor may also know as 150cc motor,150cc scooter motor,4 wheeler motor,starter motor motorcycle,gy6 starter motor,150cc gy6 starter motor,50cc starter motor,150cc starter motor,125cc starter motor,moped starter motor,scooter starter motor,go kart starter motor,ATV starter motor. ....
Check Stock

Transmission Pressure Switches,2ND - 3RD Automatic Oil Pressure Sensor Switch Set 28600-P7Z-003+28600-P7W-003 For Honda (27 PSI Beige+ 33 PSI Black)

  • Note:Remanufactured.Transmission Pressure Switch with premium quality..
  • Each transmission switch are engineered and tested to meet or exceed OEM standards and performance.
  • Replacing OE number for reference: 28600-P7W-003, 28600-P7Z-003.
  • Directly fit in and easy to install, fit for Honda & Acura.
  • Package Include: 1Pc Honda Pressure Switch 33PSI (Black) Solenoid, 1Pc Honda Pressure Switch 27PSI (BEIGE) Solenoid.
Check Stock

Starter Solenoid Relay + Starter Motor for 4-Stroke GY6 Engine 50cc 150cc 200cc 250cc ATV Dirt Bikes Scooters Go Kart Compatible with Taotao SUNL Coolster Baja Roketa 4 Wheelers Moped by BOOTOP

  • Starter Solenoid Relay + Starter Motor for GY6 4-Stroke ATV Dirt Bikes Pit Bike Scooters Go Kart Moped Quad 4 Wheelers Buggys 50cc 150cc 200cc 250cc Engine. Compatible with Tao tao SUNL Coolster Baja Roketa Icebear Jonway GY6 engine parts replacement..
  • Starter Solenoid Relay for 4-Stroke GY6 Engine 50cc 150cc 200cc 250cc ATV Dirt Bikes Scooters Go Kart Dne Buggys Quad 4 Wheelers Pit Bike Moped Roketa SSR Taotao Sunl Coolster..
  • Motor Starter for GY6 125cc 150cc Scooter ATV Moped Go Karts Quad 4 Wheelers Taotao SUNL Baja Icebear Roketa Jonway.
  • GY6 Motor Starter For 152QMI 157QMJ engine motor. 12V / 9 Teeth / CW Rotation..
  • Starter Solenoid Relay,Starter Relay Solenoid also works with Honda Clones 50cc, 70cc, 110cc, 125cc, 250cc etc. GY6 Starter Solenoid Relay Replace oem part number: 35850-286-007,35850-286-027,35850-286-017,35850-375-000. High cranking power,reduce startup switch electric current.
  • High quality material,efficient and durable..
  • 4 Stroke Engine Parts GY6 150cc starter motor may also know as 150cc motor,150cc scooter motor,4 wheeler motor,starter motor motorcycle,gy6 starter motor,150cc gy6 starter motor,50cc starter motor,150cc starter motor,125cc starter motor,moped starter motor,scooter starter motor,go kart starter motor,ATV starter motor. ....
Check Stock

28600-P7Z-003 28600-P7W-003 2ND – 3RD Automatic Transmission Oil Pressure Sensor Switch Compatible with Honda Accord Odyssey Pilot, Acura TL CL MDX RSX TSX

  • Transmission pressure sensor switch parts numbers 28600-P7W-003, 28600-P7Z-003.
  • Fit for Honda and Acura models, made of high-quality materials with the durability performance.
  • Easy to install, directly replace the old pressure sensor switch.
  • Solve the problem of the transmission pressure switches, improve the driving experience.
  • Package Include: 1 unit Honda pressure switch 33PSI (black) solenoid, 1 unit Honda pressure switch 27PSI (beige) solenoid.
Check Stock

Transmission Pressure Switch, 2pcs Transmission Pressure Switches for HA28600 P7W 003 28600 P7Z 003 Transmission Pressure Switch 28600-P7W-0 28610-rke-004 tr

  • Fitment: Transmission Pressure Switch is compatible for H&A. Transmission Pressure Switch has undergone strict quality inspection to guarantee the safety and reliability, which comes with a complete set, easy to install without any modification is required..
  • Excellent Performance: The Transmission Pressure Switch has stable performance, high reliability. Exquisite workmanship, stylish and generous appearance..
  • High Quality Material: The Transmission Pressure Switch is made of high quality material Plastic + Metal. Good quality not only can provide a safer guarantee for your life, but also good materials can increase product life..
  • Package List: Including 1pc 33PSI (black) Solenoid switch and 1pc 27PSI (beige) Solenoid switch..
  • OEM Number: The Transmission Pressure Switch replacing OEM number for reference is 28600-P7W-003, 28600-P7Z-003. Each transmission switch are engineered and tested to meet or exceed OEM standards and performance. Product quality is worthy of your trust..
Check Stock

APDTY 116324 Automatic Transmission AT Kickdown Solenoid Valve Body Module

  • Solves Automatic Transmissin Shift Issues From A Failling Control Solenoid.
  • Fits Models With 62TE Automatic Transmission.
  • 62TE Transmission Is Identified By Having a 23-Pin Electrical Connector.
  • Replaces 68376696AA, 5078709AB, 05078709AA.
Check Stock