Top Atmega48v 10au Reviews

SunFounder R3 BoardBundled with Mega 2560 R3 ATmega2560-16AU Board for Arduin

  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
Check Stock

ACEIRMC 2pcs for MEGA 2560 PRO Embed CH340G/ATMEGA2560-16AU Chip with Male Pinheaders Compatible for Arduino Mega2560 Module

  • MEGA 2560 PRO Board Embed CH340G/ATMEGA2560-16AU Chip with Male pin headers, Compatible for arduino Mega2560 DIY.
  • Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G..
  • Board have compact size 38x55mm. It is good solution, to make your final project on solder proto-board..
  • Board for functionality similar to the compatible for Arduino Mega 2560..
  • The board used the chip CH340G as converter UART-USB..
Check Stock

Nano V3.0 Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE Nano x 3 with USB Cable

  • Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL..
  • LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system..
  • Works the same as original Nano, runs perfectly on programming software..
  • Using Atmel Atmega328P-AU MCU, Support ISP download.
  • LAFVIN Nano CH340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila..
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be ....
Check Stock

for Nano V3.0 Module ATmega328P 5V 16MHz CH340G Chip Microcontroller Development Board USB Cable for Arduino Nano 3pcs+3pcs USB Cable

  • 1.Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system..
  • 2.It uses the chip ATmega328P CH340 instead of FT232RL. You can start with various electronic projects by using the Arduino software (IDE). It has....
  • 3.It can be powered via USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27)..
  • 4.Nano CH340 controller is a compact board similar to the UNO, smaller and breadboard-friendly than Diecimila..
  • 5.Using Atmel Atmega328P-AU MCU, Support ISP download.
Check Stock

HiLetgo 3pcs Pro Mini Atmega328P 5V/16MHz Development Board Compatible with Arduino pro Mini

  • Bootloadered already in the board, easy to get started..
  • Support power supply by external 3.3V~12V DC power and 9V battery power..
  • Support serial downloading, 100% Compatible to all Pro MIni series shields and sensors..
Check Stock

Developing Computer Skills - Binaural Beat Brainwave Subliminal Systems

  • 【Same function as the original Arduino】It great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs.
  • 【CHIP UPGRADE】Upgrade the main control chip to ATMEGA328P-AU.And it same as the original arduino pin layout. It compatible with all expansion boards..
  • 【ADDED A 500MA SELF-RECOVERYFUSE】Compared with the original ARDUINO, a 500ma self-recovery fuse is added, which automatically disconnects the circuit when short-circuited to avoid component damage.Change the plug-in pins of the original ARDUINO to SMD pins to avoid short circuit of the development board contact conductors, which is safer..
  • 【Added 10 LED marquees driven by MOS tubes】which avoids the problem of insufficient output current of the IO port of the single-chip microcomputer, and can directly drive a small DC motor through the IO port..
  • 【EASY TO USE】Change the original USB-B type interface to MICRO-USB interface, which is more convenient to use..
Check Stock

AITRIP 5 Pack PRO Mini Atmega328P-AU 5V/16MHz Development Board Microcontroller Bootloadered with Pin Headers for Arduino (5pcs)

  • Support external power supply 3.8-12V DC.
Check Stock

HiLetgo 3pcs Pro Mini Atmega328P 5V/16M Replace ATmega128 Pro Mini Atmega328 328P DC5V 16M for Arduino

  • Support external power supply 3.8-12V DC.
Check Stock

ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant

  • The Mega is 100% compatible with Arduino IDE and most of the shields are designed for the Arduino mega R3，RoHS Compliant.
  • The chip is Atmega + 2560-16au and 16u2, same with the official version..
  • Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin.
  • Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
  • It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..
Check Stock

XLR Condenser Microphone Kit, MAONO Professional Cardioid Studio Condenser Recording Mic for Streaming, podcasting, Singing, Voice-Over, Vocal, Home-Studio, YouTube, Skype, Twitch

  • 48V phantom power required: When you want a great audio experience with the AU-PM320S XLR condenser microphone, you need to connect the microphone with 48V phantom power/an audio interface/a mixer/a preamp first!.
  • High Configuration and Excellent sound: Built-in large Dia.16mm condenser capsule, Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response. High-SPL handling and wide dynamic range make wide versatility. This high-quality XLR microphone is ideal for recording sounds and suitable for podcasting, recording, streaming, vocal, and online chatting..
  • Low noise: This XLR microphone uses a 98 in male to female XLR cable connection, and the Pro-grade microphone cord is designed for microphones. Cardioid pointing can reduce the pickup of surrounding noise and bring you an immersive recording experience. The shock absorber can reduce the noise caused by vibration. Pop filter and windscreen cap can lower wind and Saliva interference and make your voice clear..
  • Full Metal Construction: Higher standard microphone craftsmanship, AU-PM320S microphone uses high-quality materials to protect the microphone from being hurt easily as well as the internal structure. The adjustable scissors arm bracket is made of an ....
Check Stock

ACEIRMC 6pcs Nano V3.0 3.0 Controller Terminal Adapter Expansion Board Nano IO Shield Simple Extension Plate for Arduino Mano AVR ATMEGA328P

  • Designed for Arduino for Nano V3.0: The item is a terminal expansion adapter, working very well for prototyping Arduino for Nano projects.
  • It lables for Arduino for Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order)..
  • You can use this adapter to easily hook up for arduino for Nano to an outside world via hook up wires.
  • This item is a terminal expansion adapter, designed for Arduino Nano V3.0..
  • Nano Terminal Adapter Shield Expansion Board Compatible with Arduino Nano V3.0 AVR ATMEGA328P-AU Module.
Check Stock

REXQualis Nano V3.0, 3pcs Nano Board CH340 / ATmega328P with USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 with 3 Cable)

  • √ REXQualis Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system..
  • √ REXQualis Nano is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • √ REXQualis Nano is Using Atmel Atmega328P-AU MCU, Support ISP download and USB download, Power via the Mini-B USB..
  • √ The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
Check Stock