Top Arduino Board Reviews

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

AITRIP D1 Mini WiFi Dev Board,Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini (Pack of 6)

  • （pack of 6 ）This D1 mini module is a mini WIFI board based on ESP-8266EX..
  • Our D1 mini development board is 100% compatible with Arduino WeMos and can be programmed in Compatible with Arduino IDE..
  • Support OTA on line.Compatible withArduino compatibility. Using Compatible with Arduino IDE for programming..
  • This WLAN board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire and a micro-USB connection..
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB connection.
Check Stock

Treedix Mini Pocket AVR Programmer Reset Reprogrammed Module Bootloader BootRescure Compatible with Arduino Controller Board

  • Development board production tool, no other equipment or compiler necessary, Abnormal status recovery bootloader, DIY development board writing bootloader..
  • Used to reprogram the Arduino BootLoader to the microcontroller chip..
  • Easy to program through the ICSP (In-Circuit Serial Programming) interface. Just directly plug it onto the ICSP interface to complete the bootloader..
  • This module can be connected to the ICSP interface, which is the 6 pin headers terminal on the Arduino controller board, which match 5V, MISO, MOSI, SCK, GND and RESET..
  • Compatible with Arduino UNO/UNO Wifi/Nano/Ethernet/Pro/Pro mini/Duemilanove/Diecimila/Mega/Mega 2560/Mega ADK/Leonardo..
Check Stock

Arduino MKR IoT Bundle [GKX00006]

  • Learn the basics behind the Internet of Things, build your own connected devices, and control your Arduino MKR 1000 board over the Internet..
  • With 5 step-by-step tutorials on Arduino’s online platform, includes all the components needed for those and more!.
  • Connect to the dashboard of Arduino’s IoT Cloud: log, graph and analyze sensor data, trigger events, and automate your home or business..
  • Display information locally using the LCD display, or activate mechanical devices with one of the two motors in the kit..
  • Power the board from the USB port, or using the included battery connector (battery not included)..
Check Stock

KEYESTUDIO 48 Sensors Modules Starter Kit for Arduino with LCD, 5v Relay, IR Receiver, LED Modules, Servo Motor, Temperture, Gas Sensor, Programming for Beginners Adults Learning

  • This electronic sensor kit contains 48 pieces most popular and mainstream sensors and modules, allow you to do a lot devices, robots and other interactive device with the best price. This kit Not contains arduino controller board..
  • Compatible with various micro-controllers and Raspberry Pi, such as mega 2560, r3 development board, pro micro, leonardo, etc. Note we only offer arduino instructions..
  • We provide detailed projects for each sensor based on development board, including wiring method, test code, etc. Download the arduino tutorial from wiki website..
  • This is high quality sensor kit with exquisite packaging. It's a perfect present for junior high and high school inventors, hackers, designers, and tinkerers of all levels..
  • The tutorial shows wiring for the Arduino and gives example code. All of this makes getting started with sensors quite easy. The professional support team is ready to answer any questions..
Check Stock

SunFounder R3 BoardBundled with Mega 2560 R3 ATmega2560-16AU Board for Arduin

  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
Check Stock

Arduino MKR WiFi 1010 [ABX00023]

  • MKR 1010 simplifies the prototyping of WiFi-based IoT applications, easily connected and configured to other Arduino products. You do not need to be a network expert!.
  • The hybrid WiFi / BLE connectivity module has a low power consumption mode, improving the life of your batteries..
  • Ideal for: Entry point to and professional IoT, building wireless sensor networks in minutes, remotely operated devices..
  • Cloud features: the board can connect to any kind of existing WiFi network, or use it to create your own Arduino Access Point. It is also possible to connect your board to different Cloud services, including Arduino IoT cloud!.
  • Simply to power with a USB cable or external Li-Po 3.7V battery. Recharge the battery through the USB port..
Check Stock

Treedix Breakout Board Module with Pin Board for Teensy 4.1/3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions, the circuit board is well-made, gold-plated on both sides to prevent oxidation.
  • Simple and easy to assemble, it can be used in conjunction with a breadboard, the distance between the holes on the board is 2.54mm.
  • Widely compatible: all pins on the breakout board are accessible, and can be used in conjunction with Arduino IDE and Arduino compatible hardware.
  • Use this breakout board module to easily extend Tennsy 4.1 project to industrial control, home automation or other applications.
  • Note: The package is not include teensy development board.
Check Stock

ARCELI ESP-12E ESP8266 UART WiFi Wireless Shield Compatible with Arduino UNO R3

  • Standard pin interface to achieve full compatibility with the pitch Arduino Uno, Mega and so on. (Unless the standard size arduino, such as Nano, Mini).
  • 3.3V power supply using advanced chip (with the official expansion board power chip CC3000 same), so 3.3V Arduino board provided more accurate, so ESP8266 as official cc3000 chip work as normal, there is no gap..
  • It leads to a WiFi module power supply / service interface to facilitate developers to extend the power supply and maintenance..
  • Onboard ESP8266-12 stable industrial grade serial WiFi module, using an enhanced PCB antenna, signal better..
Check Stock

ACEIRMC ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module for WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino,Compatible with WeMos D1 Mini 5pcs

  • This is D1 mini, it is a mini NodeMcu Lua WiFi board based on ESP-8266EX..
  • D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, Compatible with WeMos D1 Mini..
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB....
  • WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard..
  • Our D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE..
Check Stock

FTCBlock Protoshield V3 Prototype Expansion mega Shield Bread Board for Arduino Mega2560/1280 UNO

  • Latest uno proto shield prototype expansion board with 170 ties mini breadboard..
  • 170 ties mini breadboard based for arduino,compatible with UNO R3..
  • Components can be soldered directly on the board, or through the mini breadboard above..
  • Used in conjunction with the Duemilanove ProtoShield prototype expansion board, the circuit is used to build a prototype.
  • Full Compatible with Arduino Mega ATmega1280 / MEGA2560..
Check Stock

Opto 22 G4PB8 G4 8 Channel I/O Module Rack

  • Screw Terminal Block Breakout Board for Arduino MKR..
  • With the breakout board, you can easily extend Arduino MKR projects to industrial control applications..
  • PCB mount Terminal Block: pitch 5.0mm/0.197.
Check Stock

Arduino MKR Zero with Headers [ABX00012]

  • The Central Board for your Electronic Project.
  • Powerful 32-bit Microcontroller and Micro SD Memory Card Connector.
  • Ideal for: Music, Audio processing, robotics, art installations.
  • Part of the Arduino Maker Board Family for IoT Devices, easy to configure with Arduino Software..
Check Stock