Top Antenna Module Reviews

Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4 (CM4), Notched for Antenna

  • Dedicated Aluminum Heatsink for Raspberry Pi Compute Module 4：Dedicated aluminum heatsink, corrosion / oxidation resisting, better heat dissipation.
  • For CM4 & based board：matching with the CM4 on size and mounting holes, fast heat dissipation.
  • Notched for antenna section：no hindrance to the antenna.
  • Using with base board: for Official Compute Module 4 IO Board or Waveshare Compute Module 4 PoE Board.
  • Note: Only HEATSINK,not include base board.
Check Stock

2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity

  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
  • With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna.
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
Check Stock

ALMOCN 4 Set 433MHz RF Wireless Transmitter and Receiver Kit High Frequency Super Regenerative Transceiver Module for Arduino Raspberry pi

  • Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor. The....
  • Wireless Transmitter Modules allow your Arduino to wirelessly comunicate with other arduinos, or with radio frequency (RF) controlled devices that....
  • Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high....
  • Frequency used to receive, decode and oscillation resistor should match with the transmitter..
  • Application:Usually used for remote control systems, such as Remote control rolling gates, smart car, smart home, etc..
Check Stock

Gowoops GPS Module with 3m Active Antenna for Arduino STM32 51 Single Chip Microcomputer

  • 1. With micro USB port, you can use general mobile phone cable to connect the GPS module to your computer. Do not need USB-TTL, convenien for use..
  • 2. The GPS module has ceramic passive antenna, you can search the satelite in a open area, do not need the external antenna..
  • 3. With SMA port, convenient for connect with the 3m Active Antenna, stronger satelite search ability..
  • 4. With the reserved TTL port, covenient for connect to USB-TTL or external single chip microcomputer..
Check Stock

Comimark 1Pcs GY NEO 6MV2 GPS Module NEO-6M GY-NEO 6MV2 Board with Antenna for Arduino New

  • This is GY NEO 6MV2 GPS Module NEO-6M GY-NEO6MV2 Board with Antenna for Arduino New，The default baud rate: 9600..
  • Non-brand New Chip, but the use of the same effect.，Module with antenna, mini size with strong signal..
  • EPROM save the configuration parameter data when power down，With data backup，With LED signal lights，Compatible with various flight control....
  • Package Included:1Pcs GY NEO 6MV2 GPS Module NEO-6M GY-NEO6MV2 Board with Antenna for Arduino New(If the number of products received is incorrect,....
  • We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution..
Check Stock

MPC (2) 4-Button 1-Way Remotes with Antenna Upgrade Kit for Fortin EVO-All & EVO-ONE - Extends Range up to 2,800 ft

  • ✅ OVERVIEW - The EVO-REMOTE-4 is a 4-Button 1-Way plug-in RF remote and antenna upgrade system for Fortin EVO-ALL or EVO-ONE "stand alone" remote start systems. Includes: (2) 4-button remotes, RFA2A antenna adapter, decoder antenna, antenna wire, and instructions..
  • ✅ FEATURES - Start or stop your engine with the push of a dedicated button from up to 2,800 feet away. Depending on vehicle and data module coverage, functions also include lock, unlock, trunk or back hatch release, and AUX channel activation..
  • ✅ INSTALLATION TYPE - The installation of this product will require only the plug-ins to an existing EVO-ALL or EVO-ONE module, no wiring connections are required. A person with basic knowledge of wiring car electronics should be able to install this product successfully..
  • ✅ IMPORTANT: This is not a full remote car starter. This is an add-on remote control kit that works with Fortin “stand-alone” remote starter systems that consist of an EVO-ALL or EVO-ONE module only and do not include a separate remote start module. If you have an EVO-ALL or EVO-ONE that was NOT purchased from MPC, you will need a FlashLink Updater to make this product work. EVO-ALL or EVO-ONE standalone systems purchased from MPC have the correct settings and the up....
Check Stock

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

  • It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
  • 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
  • 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stock

SparkFun MicroMod LoRa Function Board - 1W 915M30S LoRa Module Frequency Range: 900 - 931MHz Transmit Power 28.5 - 30dBm (max) Modulation LoRa, FSK, GFSK, MSK, GMSK, OOK Antenna Impedance: 50Ω

  • The 1W LoRa MicroMod Function Board adds LoRa capabilities to your MicroMod project. It is intended to be used in conjunction with a MicroMod processor board and a MicroMod main board, which provides the electrical interface between a processor board and the function board(s)..
  • Utilizing the 915M30S LoRa module from EBYTE, which is a 1W (30dBm) transceiver based around the SX1276 from Semtech. There is a robust edge mount RP-SMA connector for large LoRa (915MHz) antennas.
  • with modification, a U.FL connector is also available. We've successfully tested a 12 miles line-of-sight transmission with this module (user results may vary)..
  • Board Features: M.2 MicroMod Edge Interface, Keyed Screw Slots, RP-SMA Antenna Connector, Configurable U.FL Antenna Connector. MicroMod Peripherals Used: 5V Power.
  • 1W 915M30S LoRa Module Features: Based on SX1276 chipset from Semtech.
  • modulation: LoRa, FSK, GFSK, MSK, GMSK, OOK.
  • Data Rate: FSK: 1.2 - 300kbps, LoRa: 0.018 - 37.5kbps.
  • Note: A MicroMod Processor, Main Board, and antenna are not included with this MicroMod LoRa Function Board. These parts will need to be purchased separately.
Check Stock

Isometric Helical Antenna, 2.4Ghz-5.8Ghz Circularly Polarized Antenna UWB Antenna for Transmission and Reception of Radio Signals

  • HIGH QUALITY — The isometric spiral antenna is made of high quality plastic and semi-conductor materials for durability and long life..
  • CIRCULARLY POLARIZED ANTENNA — This antenna is a right-handed circularly polarized antenna. Circular polarization can reduce the effects of multipath effects..
  • VERSATILE APPLICATION — The isometric helical antenna is suitable for transmitting and receiving directional radio signals and covering signals..
  • OPERATING FREQUENCY RANGE — The antenna operates at 2.4GHz-5.8GHz and covers the common frequency of the UWB positioning module and WIFI..
  • CONVENIENT AND PRACTICAL — The isometric spiral antenna is small in size, easy to install, reliable in quality, stable and stable in performance, easy to install and use..
Check Stock

WiFi Bluetooth Antenna Module Connector Cable Parts for Sony Playstation 4 PS4 Replacement

  • Wifi Bluetooth Antenna Board For Sony PlayStation 4.
  • Replacement Wifi Bluetooth Antenna Module Connector Cable.
  • Package Includes: 1 x Wifi Bluetooth Antenna For Sony PlayStation 4 PS4.
  • Please check the pictures and description carefully before buying!!.
Check Stock

GY-NEO6MV2 New NEO-6M GPS Module NEO6MV2 with Flight Control EEPROM MWC APM2.5 Large Antenna for Arduino Color Antenna

  • GPS modules NEO-6M,3V-5V power supply Universa.
  • GPS Module with Flight Control EEPROM MWC APM2.5 Large Antenna for Arduino.
  • Module size 25mm*35mm,Antenna size 25*25mm.
  • Compatible with various flight control modules that provide GPS computer test software.
Check Stock

Dorhea 4Pcs ESP8266 ESP-12F WiFi Serial Module Microcontroller 802.11N Development Board Wireless Transceiver Remote Port Network Module for NodeMCU MicroPython

  • The ESP-12F module combines the ESP8266 microcontroller with 4MB of flash and a PCB antenna, with 16-bit Lite mode, clocked at Supports 80 MHz and 160 MHz, supports RTOS, and integrates Wi-Fi MAC/BB/RF/PA/LNA..
  • The ESP-12F WiFi module supports the standard IEEE802.11 b/g/n protocol, a complete TCP/IP protocol stack. Users can use this module to add networking capabilities to existing devices or to build separate network controllers..
  • The default firmware can add WIFI capability to another microcontroller, but it really shines when loaded with MicroPython, or NodeMCU..
  • The ESP-12F is an improved version of the 12E, improve the peripheral circuit, the four laminates plate process, enhanced impedance matching, signal output is better, It is pin compatible with enhanced stability and a better antenna..
  • Not recommended for users who are new to the ESP8266. New users should instead look at development boards with integrated USB..
Check Stock

SUPERBAT Cell Antenna 4G LTE Antenna 9dbi Omni External Antenna with SMA Magnetic Extension Cable + FME Female to SMA Adapter for Gateway Wireless LAN Devices Cell Booster Repeater Router etc.

  • Type: sma antenna cellular high gain router antenna.
  • Frequency Range :850-960/1710-2170MHz | Gain :9dbi | Impedance:50Ω | VSWR ≤1.5 | Antenna Type：Magnetic Mount |Polarization :Vertical | Omni-directional.
  • Antenna Connector Type:SMA male connector | Antenna Length :1.4ft (420mm) Magnetic Mount diameter：65mm | Magnetic Base Cable Type :9.8ft (3M) RG58 coax cable.
  • Package Includes :1Pcs 3G antenna SMA male connector magnetic base mount + 1Pcs FME female to SMA female coax adapter.
  • 900 mhz antenna magnetic is used for cell phone signal booster and cellular repeater / wireless wifi router, Usb Modem, Module, security camera, mobile hotspot, Trail Cameras Mobile Security Camera, Gateway and more.
Check Stock