Top Aluminum Rivet Mandrel Reviews

Keadic 75Pcs 3 Sizes 3/16 Black Aluminum Blind Rivets Assortment Kit Includes 1/8 x 9/32 3/8 7/16 1/2 Open End Domed Head Pop Rivets for Joining Metal Plate Pipe

...rge flange blind rivets kit contains 25pcs 3/16” x 5/8” (4.8x16mm) pop rivets, 25pcs 3/16" x 4/5" (4.8x20mm) pop rivets, 25pcs 3/16" x 1" (4.8x25mm) pop rivets, totally 75 pcs. All are packed by sizes in a sturdy storage container for convenient storage. Pls refer to the picture for more size detail..
【Premium Aluminum Material】 Blind pop rivets have high-quality aluminum body and steel mandrel for corrosion and rust resistance. It does not deform surfaces after the riveting process is finished. Smooth and burr-free surface can be well matched with the rivet gun..
【Provide A Strong Grip】The heavy duty material and thick shaft design offers a strong grip, prevent stripping effectively and a lasting connection without corrosion or popping. The large flange design can increase the connection area with the plat to expand force-bearing area and stable holding..
【Easy to Use】 Simply drill a suitable hole and insert the blind rivet head into it and use rivet gun to pull the mandrel through. Then, you can lock the rivet in place and get a strong fastening..
【Multipurpose Fastener】Our aluminum large flange rivet is corrosion and rust resistant so that they are works great on indoor and outdoor. Ideal for joining sheet metal, plastics, rubber, ....

Check Stock

POP Rivet 18-8 Stainless Steel - 8-8 1/4 x 1/2 Gap 0.376-0.500 Qty-25

Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
Rivet size and grip range is measured in installed length..

Check Stock

POP Rivet 18-8 Stainless Steel - 8-12 1/4 x 3/4 Gap 0.626-0.750 Qty-25

Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
Rivet size and grip range is measured in installed length..

Check Stock

POP Rivet 18-8 Stainless Steel - 3-2 3/32 x 1/8 Gap 0.032-0.125 Qty-250

Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
Rivet size and grip range is measured in installed length..

Check Stock

POP Rivet 18-8 Stainless Steel - 8-6 1/4 x 3/8 Gap 0.251-0.375 Qty-25

Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
Rivet size and grip range is measured in installed length..

Check Stock

PAGOW 3/16 x 1 Inch 4.8x25mm Flange Aluminum Blind Rivet Large Self-Plugging Open End Decorating Fastener Nails Pop Rivets Core Pulling Rivets Grip Pange 11/16-3/4 Inch 17.4-19mm 60 Pcs

Material: These large bolt dropper rivets are made from high quality aluminum alloy which is one of the highest forms corrosion resistance, making it longer last, sturdy, light, durable, easy and convenient to use. The highest quality will support all of your projects..
Head Size: Head diameter 3/16" (4.8mm), Length: 1" (25mm). Large Flange OD: 5/8" (16mm), Grip Range: Diameter 3/16"(4.8mm), Length: 11/16"-3/4"(17.4-19mm)..
Fitted Tools: The flange blind rivets assortment perfect fitted with automatic riveting machine, rivet bucket, and rivet gun..
Easy to use: The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet. Using a rivet gun, the centerpiece (mandrel) is pulled up and creates a bulge at the bottom permanently locking and securing the material..
Applications: The aluminum open end pop long rivets are very strong and are great be used in a variety of environments including salt water, freshwater, indoor and out,and widely suitable for joining plastics, rubber, wood, grip and laminates, is used in assembly of caravans, trailers, furniture, plastic-framed window body..

Check Stock

WETOLS Rivet Nut Tool, Hand Rivet Nut Tool with 7 Metric & Inch Mandrels M6 M8 M10, 1/4-20, 5/16-18, 3/8-16, 70pcs Rivnuts and Blow Carry Case - WE-882

Various Mandrels - The rivet nut tool equipped with 7pcs interchangeable mandrels(Metric M6 M8 M10.
Easy for Use - The mandrel of Wetols 14" Rivet Nut can be easily removed by hand for easy mandrel change or maintenance..
Sturdy and Durable - The mandrels of our hand rivet nut tool is made from Chrome steel with heat treated 40℃ and the arm is made from 45 carbon steel, which protect against corrosion and resist to deformation..
Solid Blow Case - All Accessories are packaged in the blow molded carry case for easy storage and portability. Each tool is placed close to its position to prevent movement and scratching..
Complete Accessories - 70pcs rivet nuts (10 rivet nuts for each mandrel,20 rivet for SAE 1/4-20).Please note that the 1/4-20 mandrel was installed in the gun..

Check Stock

Astro Pneumatic Tool PRN1 3/8 Capacity Pneumatic Rivet Nut Setting Kit - Metric & SAE

Includes 8 mandrels/nosepieces in the following sizes: M4, M5, M6, M8, M10, 1/4", 5/16", 3/8" (additional 8-32, 10-32, 10-24 avail. from Astro).
Instantly set rivet nuts with the pull of the trigger, if setting 3/8” tool may require two strokes if working pressure is .
Quickly un-thread set rivet nuts by operating free spinning rear wheel (keep mandrel lubricated).
2680lbs of instant air-hydraulic pulling force.
Max capacity: M10 (3/8") steel and aluminum rivet nuts, M6 (1/4") stainless rivet nut.

Check Stock

AIUITIO 16" Rivet Nut Tool, Rivnut Tool Kit with 13 Metric and SAE Mandrels, Nutsert Rivet Tool Set with 200Pcs Rivnuts, Threaded Insert Hand Riveter with Rugged Carrying Case

Complete Rivet Nut tool Kit for meetting various needs, high quality Threaded Mandrels with nosepieces: M3/M4/M5/M6/M8, totally 130pcs aluminum Ribbed Rivnuts, M6(30pcs), M3(30pcs), M4(30pcs), M5(30pcs), M8(10pcs).The tool can only be used for aluminum alloy nuts, not suitable for Steel nuts.
This hand pull nut rivet gun kit is suitable to be used in furniture repair,decration,car,trailers,even Boat building,operat easily..
The rivet nut gun designed with mandrel knob to separate the aluminum rivet nut easily from gun after it has been fixed.
The rivet tool stop lever limits the opening of handles after the nut has expanded to prevent the thread of the nut from deformations.
All rivet nut tool and accessories are packed in a Plastic Case with dual clip locks and anti-slip carrying handle for good storage and easy portable use!.
The tool can only be used for aluminum alloy nuts, not suitable for Steel nuts. Since the product involves many accessories, remind the buyer to check the goods as soon as possible after receiving the goods. If there is any missing or problem, please contact ....

Check Stock

Mardatt 120Pcs 5/32 x 3/8 Inch Aluminum Blind Rivets 4 x 10mm Open End Pop Rivets Set Domed Head Pull Rivets Decoration Fastener Long Rivets for Sheet Metal Industry

✦【What You Get】----- You will get 120pcs 5/32" x 3/8"（4 x 10mm）select blind rivets in total, which hold items together firmly. Recommend Grip Range = 4.5-6.5mm. PLEASE SEE THE 2ND & 3RD PICTURE FOR MORE INFORMATION OF THE PRODUCT..
✦【Quality Aluminum】----- Blind rivets have high-quality aluminum body and steel mandrel, corrosion resistant, durable and easy to assembly. They are strong, smooth without burr yet lightweight, and will last for years..
✦【Easy To Install】----- If you want to join metals that are difficult to weld then blind rivets are what you need. Simply drill a suitable hole and insert the blind rivet head into it, use rivet gun to pull the mandrel through. Then, you can lock the rivet in place and get a strong fastening..
✦【Provide A Strong Grip】----- Sturdy, corrosion resistant and long lasting! They work well on various projects. The tubular body is smooth and neat for firm grip effect.
the thick flange structure prevent stripping effectively..
✦【Multipurpose Fastener】----- They are commonly used in industrial riveting applications: construction, electronic, automotive, household repair and much more. Ideal for sheet metal works, such as hinges, fastening signs, shelves ect..

Check Stock

Speder 136pcs Rivet Nut Tool Kit Rivnut Tool Blind Nut Rivet Gun kit Wrench Threaded Insert Rivnut Nutsert M6/ M3/M4/M5/M8 Set for Furniture,Decration,Car,Trailer,Boat,and More

Complete Rivet Nut tool Kit for meetting various needs, high quality Threaded Mandrels with nosepieces: M3/M4/M5/M6/M8, totally 130pcs aluminum Ribbed Rivnuts, M6(30pcs), M3(30pcs), M4(30pcs), M5(30pcs), M8(10pcs).The tool can only be used for aluminum alloy nuts, not suitable for Steel nuts.
This hand pull nut rivet gun kit is suitable to be used in furniture repair,decration,car,trailers,even Boat building,operat easily..
The rivet nut gun designed with mandrel knob to separate the aluminum rivet nut easily from gun after it has been fixed.
The rivet tool stop lever limits the opening of handles after the nut has expanded to prevent the thread of the nut from deformations.
All rivet nut tool and accessories are packed in a Plastic Case with dual clip locks and anti-slip carrying handle for good storage and easy portable use!.
The tool can only be used for aluminum alloy nuts, not suitable for Steel nuts. Since the product involves many accessories, remind the buyer to check the goods as soon as possible after receiving the goods. If there is any missing or problem, please contact the seller for help and support..

Check Stock

Multi-Grip Blind Rivets Countersunk Domed Head Rivet Diameter 1/8 inch Rivet 42-44 Grip Range .062-.250 Rivet/Body Material Aluminum Mandrel Material Zinc Plated Steel Quantity 500 pcs

Rivet/Body Material: Aluminum, Mandrel Material: Zinc Plated Steel.

Check Stock

AOBEN 14 Rivet Nut Tool Professional Hand Rivet Nut Setter Kit Labor-Saving and Compact Design Including 6 Interchangeable Mandrels 90pcs Rivnuts and 2 Mandrel Lock Pins

【QUICK-CHANGE HEAD】New Quick-change head design allows for easy changing of mandrels and nose pieces. Unique spring loaded mandrel automatically....
【ERGONOMIC AND SAVE EFFORT】14 inch longer steel arms and ergonomic handles with double compound hinges maximizing leverage, it can save more....
【EXTRA MANDREL LOCK PINS】Parts included 2 mandrel lock pins, 6-piece mandrel & 90-piece rivet nuts ( Metric M6 M8 M10.
【Hard-Wearing Quality】AOBEN rivet nut tool is made from thick steel and surface is heat-treated to prevent corrosion and increase the durability....
【EXTRA LONG WARRANTY】We provide all hand rivet nut tool with 30 days Money-back and 1-Year Guarantee for your satisfaction. If you have any....

Check Stock