Top Aluminum Profile Cutting Machine Reviews

Mini Electric Belt Sander 4 in 1 w/ 1'x21' Belt 4' Disc Sander and 4' Alloy Saw Blade for Crafts, 120W Small Wood Cutting Table Saw, DIY Cutting Grinding Drilling Polishing Craft Tool

  • 【Mini table saw belt sander 4 in 1】Adding chuck, flexible shaft and cutting saw kit to the platform of the abrasive belt machine can respectively realize functions such as grinding, polishing, drilling, and cutting, etc..
  • 【Mini belt disc sander】This 1″x21″ belt and 4″ disc sander machine can realize wood, acrylic, metal, aluminum plate sanding and grinding..
  • 【Miniature table saw】Our product can also be assembled into a small table saw to achieve wood, bamboo, acrylic, plastic, aluminum plate cutting, etc. 1.18inch saw blade height cannot be adjusted, 0.39-0.79inch cutting depth..
  • 【Customized 795 motor】This 120W multifunctional abrasive belt sanding machine adopts 795 DC high-temperature resistant motor, with 7-grades regulation speed power supply, with large torque, low noise and long service life..
  • 【Aluminum alloy worktable】The cutting table is made of aluminum alloy, laser engraving black scale, with better precision, clarity and durability. The table push groove adopts T-shaped groove to prevent the material from running out when pushing, and the cutting is better controlled..
Check Stock

Imachinist S62121418 62\ Long, 1/2\ Wide, 0.025\ Thick, Bi-Metal Band Saw Blades for Metal Variable Teeth (14/18TPI)

  • Bi-metal type, HSS M42 grade, 62" long, 1/2" wide, 0.025" thick, 14/18TPI.
  • 14/18TPI is suitable for cutting tube and profile, do not cut any non-ferrous metal like aluminum etc..
  • Suits all bandsaws which use 62" long, 1/2" wide bandsaw blade.
Check Stock

Carpenters' End Cut Pliers-Hammer Head Style

  • Premium Material:This end cutting nipper is made of forged alloy tool steel Cr-Ni for long lasting performance, laquer treatment on surface to prevent rust.
  • Sharp Jaw Cutting:Blades are induction hardened to HRC 58-64 for superior cutting performance and durability.
  • Non-slip Handle:This 7 inch end niper plier with no-slip red cushion rounded handle offers comfortable grip.
  • Multi-Functions:High-leverage design and round head profile for easily cutting off nails and screws, trim wires, and pulling out nails and staples, light but smooth construction, easy to open and close in your hand.
  • Wide Application:The end cutting plier is good at construction, floor installation, carpentersfor cutting copper, aluminum, steel, and piano wire in solid, stranded, or braided forms.
Check Stock

Montolit Masterpiuma 93P5 Power 5 Ergonomic Manual Tile Cutter 36" (93cm) Cutting Tool For Tough and Delicate Large Format Glass and Ceramic Tiles for Floor and Wall Tile Installation

  • Montolit tile cutter 93P5 is suitable for cutting tiles up to 36" in length, supports diagonal cutting up to 26"x26" in size, and can cut tiles up to 3/4" (2cm) thick.
  • The Montolit ceramic tile cutter frame is sized and structured in the points of greatest stress with the insertion of “reinforcement brackets” that optimize the machine's behavior for front cuts, thick cuts, or full-body porcelain..
  • The tile cutter hand tool features an oversized goniometric square that can rotate both to the right (+ 45 °) and to the left (- 45 °), allowing precise cuts at different angles.
  • An expanded ceramic cutter support surface or robust die-cast aluminum wings are perfectly integrated into the frames, ensuring improved support to large tiles with diagonal cuts without leaving the machine profile.
  • The tile cutter features a double trestle splitting, which can be closed for normal cuts and opened for cuts on the corner or for mosaic ceramic tile sheets.
Check Stock

uxcell Roll-in Spring M6 T Nut, Roll Ball Elastic Nuts for 4040 Series Aluminum Extrusion Profile, Pack of 12

  • Made from carbon steel,have high hardness, surface is Nickel-plated for good rust resistance..
  • Used for T-slot aluminum profile 40x40 series..
  • Easy to be roll into T slot of aluminum profile..
  • Package Content: 12 Pcs x 4040 Series M6 Roll Ball Elastic T-Nuts..
  • 4040 Series Aluminum Profile T-Nuts widely Use to build CNC routers, 3D printers, CNC laser cutters, CNC plasma cutters, robotics projects, 3D carvers, machine guards, workstations, etc.
Check Stock

1.5\ 5/16-18 T-Bolt, 5 Pack

  • M6x20mm Hammer Head Bolt T Screw size: 15 x 10 x 6mm/0.59" x 0.39" x0.24"(LWT).
  • Metal Type：nickel plated , Carbon Steel.
  • 2020 Series European standard Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, robotics projects, machine guards, workstations, etc.
  • T-shaped screws are used for aluminum profile design, suitable for standard 6mm T-slot 20 European standard aluminum profiles.
Check Stock

Imachinist S59121224 Bi-Metal 59-1/2-inch X 1/2-inch X 0.025-inch Bandsaw Blades for Cutting Soft Ferrous Metal (24TPI)

  • Bi-metal type, HSS M42 grade, 59-1/2" long, 1/2" wide, 0.025" thick, 24TPI.
  • Perfect for cutting ferrous soft metal only, DON'T cut aluminum or other non-ferrous metal with this 24TPI.
  • 24 TPI is fixed teeth profile, teeth are small, do not cut solid bar or rod..
  • 24TPI is suitable for cutting thin tube, profile, sheet and plate etc.
  • Suits all bandsaws which use 59-1/2" long, 1/2" wide bandsaw blade.
Check Stock

3000W Electric Concrete Saw, 14 in Blade Concrete Cutting Machine Circular Saws 3800R/Min with Water Pipe/Pump Wrench Saw Blade for Concrete Granite Tile Masonry Saws

  • HIGH-QUALITY MATERIALS -The head shell of this concrete cutting machine is made of aluminum, the saw blade is made of diamond, the motor material is iron + copper, and the gear is steel. It is strong and durable. It is very suitable for cutting granite, brick, porcelain, reinforced concrete, Metal, cement, steel, wood, etc..
  • MULTIPLE ADVANTAGES - lock the switch, no need to press the switch all the time, labor saving and convenient.
  • external carbon brush design, convenient disassembly and assembly, effectively prolonging the service life of the motor.
  • aluminum alloy gear box, light weight, no deformation, more stable power transmission ..
  • REASONABLE DESIGN - water pipes supply water to the blades to reduce dust. During your operation, the safety cover will block flying objects. Double protection switch prevents accidental opening of the machine. The rotating rear handle and the positioned front handle facilitate accurate cutting in horizontal and vertical modes..
  • ADJUSTABLE CUTTING DEPTH - This concrete saw uses a 14-inch diamond cutting blade. The cutting depth can be deep or shallow (cutting depth: 2-5.1 inches), and it is strong enough to cut most materials. Perfectly meet your needs for various cutting depths..
  • SPECIFICATION - Product Size:25.59 x 15....
Check Stock

DITKOK Galvanized Steel Window Dryer Vent for 4" Dryer Vent Hose, Fit 26" - 36" Vertical Sliding Window Adjustable

  • The 4 inch adjustable air intake window vent by DITKOK was designed to provide the perfect solution for those that need to vent out of a window..
  • The window dryer vent is made with 24 gauge galvanized steel and has an aluminum back draft damper to prevent drafting from outdoors,and also prevent birds from nesting in the vent..
  • Simply place the vent in the open window, slide the side panels to fit the window opening (26" - 36" windows), and close the window. We designed this vent with an enlarged shroud to minimize airflow resistance. Don't worry the standard low profile dryer vent cover adds considerable resistance to airflow..
  • This window vent isn't just for the dryers, it can be used in paint booths, laser engravers, exhaust fan blowers, and just about any other device with a 4" circular exhaust..
  • We provide one year warranty. Note: The scratches on the surface are caused by the laser cutting machine during the cutting process, which is unavoidable, please understand..
Check Stock

Jim Dunlop String Cutter System 65 Guitar Tools DGT07

  • Easy to cut up to 4/0 aluminum, 2/0 soft copper, 100-pair 24 AWG communications cable with our expertly induction-hardened high-carbon steel cutting....
  • Made of durable Chrome-Moly steel, these cable cutters feature precision-machined knife and anvil style cutting blades with a low profile design that....
  • The long handle of the wire crimper is 10 inch and wrapped with soft rubber, ergonomic lever structure design can increase friction and help you use....
  • You will get one piece cutter,Through-hardened (not case-hardened) for longer-lasting cutting surfaces..
Check Stock

Plasma Cutter, HeroCut 45i, 110 Voltage IGBT Inverter Air Plasma Cutter 6mm Clean Cut, 10mm Severance Cut In 70PSI (CUT45i 110v)40A or 63A Power Breaker is suggested

  • Plasma Cutter Input Voltage 110V, 60Amps Power breaker is suggested. 40Amps cutting current,High frequency arc starting, Quality cutting thickness 6mm, Severance cutting thickness [email protected] 40Amps.
  • Very compact design, Adopt Latest IGBT inverter technology, Easy cut stainless steel, Alloy Steel, Mild Steel, Thin Copper, Aluminum, It is High Frequency Arc Starting. 1 year warranty for machine..
  • Input voltage is 110V 50/60Hz, 60Amps Power breaker is suggested. Machine maybe explode if plug it to 220V, Make sure you fix machine to correct voltage, Better use 60Amps power breaker for this machine..
  • 40Amps output, Duty cycle 60% in 40Amps, 100% in 35Amps, Air pressure range from 40-70PSI, Maybe the cutting arc not stable if the air less or over the range..
  • We supply high quality machine, very lightweight but powerful, Very easy to carry, Machine come with quality accessories and torch parts, Easy cut stainless steel, Alloy Steel, Mild Steel, Thin Copper, Aluminum. ( search torch consumables at amazon ASIN: B08BCLNL5B ).
Check Stock

TOPOWN Galvanized Steel Window Dryer Vent for 4" Dryer Vent Hose, Fit 16" - 25" Horizontal/Vertical Sliding Window Adjustable

  • The 4 inch adjustable air intake window vent by TOPOWN was designed to provide the perfect solution for those that need to vent out of a window..
  • The window dryer vent is made with 24 gauge galvanized steel and has an aluminum back draft damper to prevent drafting from outdoors,and also prevent birds from nesting in the vent..
  • Simply place the vent in the open window, slide the side panels to fit the window opening (16" - 25" windows), and close the window. We designed this vent with an enlarged shroud to minimize airflow resistance. Don't worry the standard low profile dryer vent cover adds considerable resistance to airflow..
  • This window vent isn't just for the dryers, it can be used in paint booths, laser engravers, exhaust fan blowers, and just about any other device with a 4" circular exhaust..
  • We provide one year warranty. Note: The scratches on the surface are caused by the laser cutting machine during the cutting process, which is unavoidable, please understand..
Check Stock

TEKTON 7 Inch Diagonal Cutting Pliers | PCT00007

  • Cuts copper, aluminum, and soft steel wire in solid, stranded, and braided forms.
  • Blades are induction hardened to HRC 58-64 for superior cutting performance and durability.
  • Stout, strong build won't bend or twist under stress.
  • Wide, gently rounded handle profile with slim, nonslip grips lets you comfortably squeeze as hard as needed.
  • Total Length: 7.5 in., Width: 2.1 in., Height: 0.7 in., Head Length: 1.2 in., Handle Length: 6.3 in., Grip Length: 4.2 in., Cutting Capacity for Copper Wire: 6 AWG.
Check Stock