Top Aluminium Connecting Rod Reviews

40 Sets Furniture Board Cam Fitting with Dowel and Pre-Inserted Nut, 3 in 1 Cam Lock Nuts for Cabinet Drawer Dresser and Wardrobe Furniture Panel Connecting (Dowel M6x36mm, Cam Fitting ¢15x13mm)

  • [SPECIFICATIONS] Cam fittings: diameter 15mm (0.59"), height 13mm (0.51"). Connecting rod bolts: total length 36mm (1.41"), thread length 9mm (0.35"), thread diameter 6mm (0.24"). Plastic nuts: diameter 10mm (0.39"), height 9mm (0.35").
  • [MATERIAL] Pre-assembled nuts are made of plastic, cam fittings are made from aluminum alloy, and connecting rod bolts are made from high quality zinc alloy with nickel plated on the surface, they have good corrosion resistance, rust resistance, high hardness and stable structure to ensure long service life..
  • [APPLICATION] The perfect partner for installing furniture, they can make the vertical connection between furniture panels. They can be applied to board wardrobes, shoe cabinets, drawers, cabinets, bed cabinets, etc., especially particle board and particle board..
  • [EASY TO USE] Super easy to install and remove, they save you a lot of time and energy. 1. Knock the plastic pre-insertion nut into a target position on the plate one. 2. Use a cross screwdriver to screw the connecting rod nut into the pre-assembled nut on the plate one. 3. Aligh the hole of plate two with the connecting rod bolt and place it on the plate one, then tighten the cam fitting clockwise to tighten the connecting rod bolt..
Check Stock

Allstar ALL96478 Engine Connecting Rod and Piston Holder , Black

  • Engine connecting rod and piston holder measures 24 inch long x 12 inch wide x 9-1/2 inch tall.
  • This combination rod and piston holder safely supports piston and connecting rod assemblies during engine teardowns or assembly.
  • Slots are 4-3/4 inch long x 1-1/2 inch wide to accommodate most piston/rod combinations.
  • Assembly is required and can also be disassembled if desired after use for easy storage.
Check Stock

Z Aventik Carbon Fly Fishing Rod Tube Case Aluminum Cap – fits Any 9ft 4pcs Fly Rod Matt Green

  • Tube inner diameter: 2.17inch / 5.5cm, Tube out diameter: 2.36inch / 6.0cm.
  • Tube length:30.7inch / 78cm, Fit for ant 9ft 4pcs fly rods or shorter..
  • Four Colors to Choose: Matt Gunsmoke, matt green, matt blue, matt coffee.
  • The high module carbon fiber tube with aluminium tube cap. Carbon rod tube weight is lighter than cordura rod tube and aluminium rod tube. Design with....
Check Stock

Hellbent

  • PacBay Heavy Duty ER Roller Guides - Durable one piece frames machined from solid 6061 marine grade aluminum which providing saltwater approved corrosion resistant and power control. Teflon coated stainless steel sleeve bearings reduce friction allowing ultra-smooth stainless steel rollers. Aluminum side plates offer increased guide strength.Large knot clearance roller design makes it heavy duty and powerful..
  • Solid Construction - Solid E-glass graphite composite blanks offer incredible pulling power.These trolling rod using the combination of carbonfiber and fiberglass blanks for unparalleled strength,durability and sensitivity..
  • Non-slip shrink tube handle-Shrink tube covered on Large diameter EVA Top grip for greater leverage and comfort .These rods are custom built which introduce outstanding performance and value.
  • Aluminium Gimbal fitting with rubber cap ,Aluminium reel seats with Double reverse knurled reel seat locks makes everything perfect.
  • Professional trolling rod for IFGA standup fishing- designed to tackle the toughest of fish like Marlin, Sail Fish, Tuna, Barracuda, Wahoo, King Mackerel, Mahi Mahi, Kingfish and Shark. All Berrypro fishing rod have One Year Warranty , please feel free to contact us directly if there is any question.
Check Stock

Two Hole Pins, 1/2 in - 1 15/16 in, Large Threaded (2 Pack)

  • 32Pcs Rotary tool mini cutting discs sets include 6pcs 22/ 25/ 32/ 35/ 44/ 50/mm woodworking thin cutting wheel +10pcs black mesh 32mm resin cutting wheel +10pcs 22mm emery cutting wheel +30pcs 22mm red polishing wheel + 1pc 1/8" connecting rod + 1pc 1/4 "connecting rod + 4pc 3mm connecting rod.
  • Mini saw blades made of high-hardness steel, hard texture, wear-resistant and heat-resistant, surface-plated emery, fine and uniform particles, rotary tool cutting disc can be used to polish or cut the surface of objects, high cutting efficiency and durability.003cbr/003e.
  • Rotary cut-off wheel kit has 6 assorted cutting discs set for different needs, HSS mini saw blades for wood and plastic / Diamond cutting wheels for stone / Resin cutting wheels for metal..
  • The cut-off wheels set + is suitable for all kinds of metal, wood, drywall, plastic, stone, ceramic, glass, hard alloy, the treasure jade stone processing and more / Ideal for cutting, grooving and trimming.003cbr/003e.
  • Compatibility: Shank cutting disc mandrels fit for most power die grinders or rotary tools & air tools.003cbr/003e.
Check Stock

110mm / 4-1/3inch Concrete Hole Saw with 220mm SDS Plus Shank Connecting Rod for Cement Brick Concrete Stone Wall (110mm)

  • APPLICATION: For Cement Brick Concrete Stone Wall..
  • WHAT YOU WILL GET:1x 110mm / 4.33 " drill bit,1x 220mm connecting rod,1x Center positioning drill bit ,1x positioning drill screw.
Check Stock

A&I - Bearing Set, Connecting Rod (.020\). Part NO: A-72080084

  • OEM replacement connecting rod, ideal for the motorbike.
  • High quality forged steel material, safe and durable.
  • Includes connecting rod, crank pin, crank pin bearing,thrust washers.
  • Quality Assurance! If you are not satisfied with our products, we accept all of the return, replacement or refund requests.
Check Stock

160mm ( 6.3 inch ) Concrete Hole Saw with 220mm SDS Plus Shank Connecting Rod Cement Hole Saw for Cement Brick Concrete Stone Wall(160mm)

  • APPLICATION: For Cement Brick Concrete Stone Wall..
  • WHAT YOU WILL GET:1x 160mm / 6.3 " drill bit,1x 220mm connecting rod,1x Center positioning drill bit ,1x positioning drill screw.
Check Stock

115mm / 4.5inch Concrete Hole Saw with 220mm SDS Plus Shank Connecting Rod Cement Hole Saw for Cement Brick Concrete Stone Wall (115mm)

  • APPLICATION: For Cement Brick Concrete Stone Wall..
  • WHAT YOU WILL GET:1x 150mm /4.52 " drill bit,1x 220mm connecting rod,1x Center positioning drill bit ,1x positioning drill screw.
Check Stock

3-In-1 Doweling Jig Kit, 8/10/15 Mm Pocket Hole Jig Set With Positioning Clip, Adjustable Hole Drill Guide Woodworking Puncher Locator Pocket Hole Drilling Aid 0-52 mm Plate Thickness

  • POCKET HOLE DRILLING TEMPLATE: The woodworking punching positioning locator has a compact design and a robust and durable structure. It is very suitable for the production of edge-to-edge, edge-to-corner and t-connections..
  • MORE EFFICIENT: The connecting rod is integrated with the round wood tenon positioning and punching clamping, all punched. Precise positioning, precise calibration, precise alignment, fast clamping, quick and firm clamping, improving drilling performance. No need to measure or calculate, you can even go one step further and mark and align the stencil for perfect results..
  • SELECTED ALLOY MATERIAL: The doweling jig is made of aircraft-grade 6061 aluminium alloy with anodized surface, stable and corrosion resistant. The woodworking punch positioning device clamps the wood like a vice, and the sturdy aluminium side can be fixed firmly to improve work efficiency..
  • 3 DIFFERENT HOLE SIZE: The size of the positioning holder kit is equipped with 8/10/15 mm drill bits and 8/15 mm hole openers, with which precision drilling can be carried out easily. Each hole guide is fitted with a hardened steel bushing to ensure a long life of the equipment. The thickness of the plate can be adjusted. The maximum size of the adjustable plate thickness is 52 ....
Check Stock

NC 100mm / 4 inch Concrete Hole Saw with 220mm SDS Plus Shank Connecting Rod Cement Hole Saw for Cement Brick Concrete Stone Wall (100mm)

  • φCUTTING DIAMETER:100mm(3.93 inch) close to 4 inch.
  • APPLICATION: For Cement Brick Concrete Stone Wall..
  • WHAT YOU WILL GET:1x 100mm / 3.93 " drill bit,1x 220mm connecting rod,1x Center positioning drill bit ,1x positioning drill screw.
Check Stock

Drum Set Clamp, Iron Connecting Clamp Holder Bracket Rod Percussion Drum Set for Cowbell Accessory Silver cowbell holder garabltar rack

  • Clamp can be used for connecting cowbells, except for connecting drum set as clamp holder..
  • Fine workmanship and shining design, made of iron and looks beautiful in silver..
  • With a connecting rod of 12cm, practical and easy to use and to operate..
  • If you are a drum set enthusiast, don't miss this great accessory!.
  • Professional drum set accessory, you will find its benefits in many ways..
Check Stock

AddGrace Ceiling Curtain Rod Bracket Heavy Duty Curtain Rod Holder with Plastic Buckle Aluminum Alloy Window Hardware Fit up to 1-2/16 Inch Set of 4 Screw Included White

  • PLASTIC BUCKLE - The cup can hold a maximum diameter of 1-2/16 inch rod. With the plastic buckle can help to fix your rod firmly and protect it from damage..
  • CEILING MOUNT - The bracket is design to be installed on ceiling, save your space and make your room more chic..
  • HIGH QUALITY - The curtain rod hanger is constructed with thick aluminium alloy, weighing 45g, strong enough to hold your heavy drapery stably. The contemporary elegant black and white rust-proof spray paint makes it presentable while the concise conforms to any requirement of room decoration.
  • EASY INSTALLATION - The package include 8 mounting screws and 8 wall anchors, use them and make the sturdy aluminium alloy construction permanent on the wall..
  • EXTENSIVE APPLICATION - This curtain rod bracket is designed for most of places like Office, Bedroom, Shower Room, Living Room, Kitchen, etc. Using it if you want to replace a old one or install a new one. Use them to create a new beautiful view in your room..
Check Stock