Top Adjustable 3 Way Passive Crossovers Reviews

Pair Rockville X6.5C Competition 6.5

Features: Pair Rockville X6.5C Competition 6.5" 1000 Watt Component Car Audio Speakers and Titanium Tweeters, (2) 6.5 Woofers for Mids and Bass, (2) 2 Aluminum Tweeters with Titanium Diaphragms, (2) Audiophile Crossovers (these are very expensive crossovers with a lot of copper coils in them for advanced sound filtering to give you the best sound quality), Peak Power Rating: 1,000 Watts Per Pair/500 Watts Each, CEA Compliant RMS Rating: 250 Watts Per Pair/125 Watts Each.
Paper Woofer Cone With Cloth Edge Gives Amazing Bass and Mids, True Aluminum Bullet to give the woofer amazing sound, Steel Stamped Basket, Oversized 1.5 ASV Voice Coil, 14 oz. High Quality Ferrite Magnet, Cutout Diameter: 5.78 inches, Impedance: 4 Ohms, Tweeter Size: 3.86' x 1.97 inches, Cutout Diameter of Tweeter: 2.80inches, Audiophile 2-Way Crossover with 12db/Octave Roll-Off, Crossover Has Tweeter Attenuation Adjustment of -3db, -6db, Frequency Response: 40Hz 20,000 Hz.
Sound Pressure Level: 90dB @ 1w/1m, Fs: 110 Hz, Re: 3.6 Ohm, Qes: 1.024, Qts: 0.865, Qms: 5.579, Titanium Diaphragm Tweeter with 1 Kapton Voice Coils - the most premium voice coils on the market, This item uses CCAW voice coil windings which is the most expensive and best material for voice coil winding, Pre-insta....

Check Stock

Acoustic Audio CSic83 in Ceiling 8\ Speaker Pair 3 Way Home Theater Speakers

Acoustic Audio CSic83 in ceiling speakers, recommended power is 20-350 watts per speaker, frequency response is 40hz-20 kHz, efficiency is 95dB, 8ohm, 3-way design and functionality.
8" Woofers, high rigidity polypropylene cones with progressive spiders, Butyl rubber Surrounds, poly mica midranges, 13mm soft dome tweeters, 3-way passive crossovers for greater fidelity.
Spring loaded speaker wire terminals, paintable grills and frames, cut out is 9.45.

Check Stock

Acoustic Audio CS-IC63 in Ceiling 6.5\ Home Theater 5 Speaker Set 3 Way 1500 Watt CS-IC63-5S

Acoustic Audio CS-ic63 in ceiling speakers, recommended power is 20-300 watts per speaker, frequency response is 45Hz-20 kHz, efficiency is 93dB, 8ohm, 3-way design and functionality.
6.5" woofers, high rigidity polypropylene cones with progressive spiders, butyl rubber surrounds, poly mica midranges, 13mm soft dome tweeters, 3-way passive crossovers for greater fidelity.
Spring loaded speaker wire terminals, paintable grills and frames, cut out is 7.87.

Check Stock

Acoustic Audio CSic64 Frameless 6.5' in Ceiling 5 Speaker Set 3 Way Home Theater Speakers, CSic64-5S

FRAMELESS FLUSH MOUNT IN CEILING SPEAKERS - Wide sound dispersion designed speakers easily integrate with new and existing audio systems, traditional Passive speaker design, simply drive power from your home audio receiver or amp.
FULL RANGE 3-WAY SOUND - 6.5" High Rigidity Poly cone woofers with progressive spiders and butyl rubber surrounds, mylar midranges and .5" mylar tweeters, 3-way passive crossovers for greater fidelity, frequency response is 45Hz-20 kHz with 92dB at 8ohm.
FRAMELESS DESIGN - Paintable edge-to-edge grills magnetically attach over the frames giving a frameless appearance, pressure lock mounting system clamps tight to drywall, fits round speaker hole size of 8.1" with a mounting depth of 3", overall size of 8.75" with spring loaded raw wire connections.
SYSTEM REQUIREMENTS - Any home audio receiver or amp with raw speaker wire outputs, power from your amp should be no less than 10 and no more than 250 watts per channel, CL3 rated in wall certified raw speaker wire to connect your receiver to the speakers.
WHAT'S IN THE BOX - 5 Acoustic Audio by Goldwood CSic64 speakers, removeable grills, cut-out templates, instruction manuals. Use for home theater surround sound, whole house audio systems, business or retail installations.

Check Stock

Acoustic Audio CS-IC83 in Ceiling 8' Speaker 6 Pair Pack 3 Way Home Theater Flush Mount

FLUSH MOUNT IN CEILING SPEAKERS - Wide sound dispersion designed speakers easily integrate with new and existing audio systems, traditional Passive speaker design, simply drive power from your home audio receiver or amp.
FULL RANGE 3-WAY SOUND - 8" High Rigidity Poly cone woofers with progressive spiders and butyl rubber surrounds, Poly Mica midranges and 13mm soft dome tweeters, 3-way passive crossovers for greater fidelity, frequency response is 40Hz-20 kHz with 95dB at 8ohm.
EASY TO INSTALL - Pressure lock mounting system clamps tight to drywall, fits round speaker hole size of 9.49" with a mounting depth of 3.7", overall size of 10.86" with spring loaded raw wire connections, durable ABS housings and grills can be painted to match your decor.
SYSTEM REQUIREMENTS - Any home audio receiver or amp with raw speaker wire outputs, power from your amp should be no less than 10 and no more than 350 watts per channel, CL3 rated in wall certified raw speaker wire to connect your receiver to the speakers.
WHAT'S IN THE BOXES - 12 Acoustic Audio by Goldwood CS-IC83 speakers, removeable grills, cut-out templates, instruction manual. Use for home theater surround sound, whole house audio systems, business or retail installations.

Check Stock

2Way Custom Component Speaker System 6.5” 400 Watt Component with Electroplated Plastic Basket, Butyl Rubber Surround & 40 Oz Magnet Structure Wire Installation Hardware Set Included Pyle PLG6C

WIRING KIT INCLUDED: This audio speaker compensates the undersized wire found in many of today’s cars. Includes grills, wires, and mounting hardware. Midrange tweeter helps to provide smooth & loud sound.
400watt 2way custom component system includes pair of woofers, tweeters, and crossovers.
6.5inch woofers with yellow poly injection cones and butyl rubber surrounds.
0.5inch silk dome tweeters with neodymium magnets and multiple mounting options.
Pair of passive crossover networks with 12 dB/octave slope.

Check Stock

Polk Audio 70-RT 3-Way In-Ceiling Speaker (2.5” Driver, 7” Sub) - The Vanishing Series | Power Port | Paintable Grille | Dual Band-Pass Bass Ports White

Acoustic Audio CSic83 in ceiling speakers, recommended power is 20-350 watts per speaker, frequency response is 40hz-20 kHz, efficiency is 95dB, 8ohm, 3-way design and functionality.
8" Woofers, high rigidity polypropylene cones with progressive spiders, Butyl rubber Surrounds, poly mica midranges, 13mm soft dome tweeters, 3-way passive crossovers for greater fidelity.
Spring loaded speaker wire terminals, paintable grills and frames, cut out is 9.45.

Check Stock

Infinity Kappa Perfect 5.1 6.1 Crossovers Pair

Compatible with 5.25, 6.5 or 6x8" speakers.
Power handling capability up to 150 watts RMS per side.

Check Stock

2) Rockville SPG88 8 Passive 800W DJ PA Speakers 8 Ohm 2) Stands+2) Cables+Case

... different positioning. Tilts on its side for use as a floor monitor. Ergonomically shaped handle for easy carrying and setup. High-quality components and exceptionally rugged high impact ABS construction. Impedance: 8 Ohms.
Frequency Response: 50Hz-20KHz. Maximum SPL @1w/1m: 119dB peak / 116dB continuous. Features: Adjustable Height. Steel Construction. Black Color. Weight capacity: 132 LBS. Adjustable Height Range: 47.25-78.75 inches. Base spread: 15-40 inches. Tube Diameter: 1.5 - 1.37 inch. Leg Diameter: 1.37 inche. Includes (2) 20 foot 1/4" to Speakon NL-4 speaker cables. Includes (1) Carry Bag.

Check Stock

Theater Solutions TS1000 Passive 10 Home Theater in Wall Subwoofers 2 Sub Set

Theater Solutions TS1000 passive in wall sub speakers, recommended power is 20-150 watts per sub, frequency response is 22Hz-200Hz, efficiency is....
Streamline 3.625" mounting depth per sub, 10" poly treated woofers with butyl rubber surrounds, 2nd order 12dB per octave crossovers, paintable frames....
Integrated wall-lock mounting system, cut out templates included, cut out is 10.625" x 10.625", overall is 12" x 12", instructions included, designed....
Use for in wall or in ceiling home entertainment, surround sound, home theater, offices or commercial.
This listing and price is for 2 in wall passive sub speakers, these passive subs require a SA200 sub amplifier for each or sub amps with similar....

Check Stock

2 Rockville SPGN128 12 Passive 2400 Watt DJ PA Speakers ABS Cabinets 8-Ohm

Package Includes: (2)RockvilIe SPGN128 12" Passive 1200W DJ PA Speaker ABS Lightweight Cabinet 8 Ohm. Lightweight speakers with heavy-duty components. Precision-designed crossovers for maximum clarity. Rugged construction with multiple mounting options..
RockvilIe SPGN128 12 Passive 1200 Watt 8 Ohm Lightweight DJ PA ABS Cabinet Speaker. Power Handling: 300 Watts RMS / 600 Watts Program Power / 1200 Watts Peak. High power long-throw 12'' woofer with 2.5 aluminum voice coil provides incredibly deep bass and acoustic power.
High-power 2-way pro sound reinforcement speaker system for live sound and play back applications. Compact and light weight system delivers distortion free sound even at extreme SPL.
State-of-the-art 1.35'' Japanese made pure titanium-diaphragm compression driver for crystal clear high-frequency reproduction. Twist-Lock speakon input and output connections. Stage floor or stand mounting with 35-mm pole socket.
Ultra-wide dispersion, 40 large-format horizontal wave guide horn molded directly into the cabinet. Versatile trapezoidal enclosure design allows different positioning. Tilts on its side for use as a floor monitor. Ergonomically shaped handle for easy carrying and setup.

Check Stock

2) Rockville SPG88 8 Passive 800W DJ PA Speakers ABS Lightweight Cabinet 8 Ohm

Package Includes: (2) Rockville SPG88 8 DJ PA Speakers Totaling 800 Watts. Rockville SPG SoundGig Passive Loudspeakers at a Glance: Lightweight speakers with heavy-duty components. Precision-designed crossovers for maximum clarity. Rugged construction with multiple mounting options..
Rockville SPG88 8 Passive 400 Watt 8 Ohm Lightweight DJ PA ABS Cabinet Speaker. Power Handling: 100 Watts RMS / 200 Watts Program Power / 400 Watts Peak. High power long-throw 8'' woofer with 2 aluminum voice coil provides incredibly deep bass and acoustic power.
High-power 2-way pro sound reinforcement speaker system for live sound and play back applications. Compact and light weight system delivers distortion free sound even at extreme SPL.
State-of-the-art 1.35'' Japanese made pure titanium-diaphragm compression driver for crystal clear high-frequency reproduction. Twist-Lock speakon input and output connections. Stage floor or stand mounting with 35-mm pole socket.
Ultra-wide dispersion, 40 large-format horizontal wave guide horn molded directly into the cabinet. Versatile trapezoidal enclosure design allows different positioning. Tilts on its side for use as a floor monitor. Ergonomically shaped handle for easy carrying and setup.

Check Stock

2) Rockville SPG84 8 Passive 800W DJ PA Speakers ABS Lightweight Cabinet 4 Ohm

Package Includes: (2) Rockville SPG84 8 DJ PA Speakers Totaling 800 Watts. Rockville SPG SoundGig Passive Loudspeakers at a Glance: Lightweight speakers with heavy-duty components. Precision-designed crossovers for maximum clarity. Rugged construction with multiple mounting options..
Rockville SPG84 8 Passive 400 Watt 4 Ohm Lightweight DJ PA ABS Cabinet Speaker. Power Handling: 100 Watts RMS / 200 Watts Program Power / 400 Watts Peak. High power long-throw 8'' woofer with 2 aluminum voice coil provides incredibly deep bass and acoustic power.
High-power 2-way pro sound reinforcement speaker system for live sound and play back applications. Compact and light weight system delivers distortion free sound even at extreme SPL.
State-of-the-art 1.35'' Japanese made pure titanium-diaphragm compression driver for crystal clear high-frequency reproduction. Twist-Lock speakon input and output connections. Stage floor or stand mounting with 35-mm pole socket.
Ultra-wide dispersion, 40 large-format horizontal wave guide horn molded directly into the cabinet. Versatile trapezoidal enclosure design allows different positioning. Tilts on its side for use as a floor monitor. Ergonomically shaped handle for easy carrying and setup.

Check Stock