Pirate Mfg 1/2\ Phenolic Intake Manifold Heat Spacer Kit 86-93 V8, Compatible with Mustang EFI 5.0L
- Increases Horsepower By Reducing Heat In Upper Air Intake.
- Kit Includes All Necessary Hardware For Install (as pictured).
Top 30efi Intake Manifold Reviews
Vortech 4GX218-150L V-3 Si-Trim EFI Truck LS-Engine Swap Supercharger Kit
- For use with 1999-2013 GM Truck Front Engine Accessory Drive (Not....
- Tuner Kit (Fuel & Tuning Components Not....
FiTech 30004 Fuel Injection System
- Includes In-line Fuel Pump The Easy Street 600HP system using FiTech�s proprietary self-tuning technology combined with the Inline Fuel Pump Fuel Delivery Kit, you can get your car on the road or track faster than ever, using just your gas pedal and the included handheld controller to make it all happen. Easy Street EFI fits any 4 barrel intake manifold and is the most self-contained, cost-effective unit on the market. Pre-programmed with bolt-n-go technology for out of the box performance....
Intake Manifold Boot W/Clamp 1253415 Fit for 2006-2009 Polaris Ranger 700 EFI
- The intake manifold boot fit for Polaris Ranger 700 EFI.
- Made of high quality materials, which ensures that it has high hardness,anti-rust, anti-corrosion,not easy to deform,durable and practical.
- Direct replacement for your old or broken one. It can be installed successfully with a simple operation, and it is very easy to install.
- Please check the description and images to make sure this is what you are looking for.
A-Team Performance - Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening - Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 Silver
- Silver Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening.
- Compatible with Chevrolet Chevy GMC Pontiac Cathedral Port LS1/LS2/LS6 Heads.
- Drive by Cable Throttle Body - 102mm Bore Throttle Body Openings.
- 3mm (1/8") Thick T6061 Sheet Aluminum Construction the Intake Will Not Bend or Flex With Boost or Vacuum.
A-Team Performance - Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening - Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black
- Black Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening.
- Compatible with Chevrolet Chevy GMC Pontiac Cathedral Port LS1/LS2/LS6 Heads.
- Drive by Cable Throttle Body - 102mm Bore Throttle Body Openings.
- 3mm (1/8") Thick T6061 Sheet Aluminum Construction the Intake Will Not Bend or Flex With Boost or Vacuum.
Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy
- 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
- 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
- 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
- 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
- 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
MOSTPLUS 615-175 329-01780 W7Z9424AA1 Intake Manifold Compatible with Ford Crown Victoria Explorer Mustang 4.6L
- 【Fitment】— Compatible for 2001-08 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 2006-11 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit V) , Compatible for 2001-05 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit 9) , Compatible for 2002 Ford Explorer Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 1999-04 Ford Mustang Intake Manifold V8 4.6L (8th Vin Digit X)(Detailed Apllication below).
- 【OEM Part Number】 — 1W7Z9424AB, 329-01780,3W7Z9424AA,3W7Z9424AD,615-175.
- 【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
- 【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
- 【Note】— Not correct for models with coolant-heated PCV. Please check the year, make, model and trim of your vehicle in the garage before purchase..
A-Team Performance - Fabricated Intake Manifold w/Drive By Wire 102mm EFI Throttle Body - Compatible with LS LSX LS1 LS2 LS6 Black
- 102mm Black Intake Manifold with EFI Drive by Wire 0° Opening Throttle Body Complete with Gaskets, Hardware, Black Fuel Rails, & Fuel Crossover Line.
- Compatible with Chevrolet Small Block V8 GEN. III/IV (LS-Based) 4.8 L / 293 in3 (LR4) 5.3 L / 325 in3 (L33, L59, LM4, LM7) 5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2).
- Compatible With Cathedral Port LS LSX LS1 LS2 LS6 heads.
- Hardware - 3mm (1/8") thick T6061 Sheet Aluminum construction.
- Durability - The intake will not bend or flex With Boost Or Vacuum.
Tektall Alloy 1\ Intake Manifold Spacer Replace for Ford GT-40 5.0 Mustang explorer Cobra 1987-1993 Durable
- 【Good Quality】 Tektall 1" Intake Manifold Spacer made of High quality alloy.Sturdy and durable, and has reached OEM specifications..
- 【Fitment】Tektall Alloy 1" Intake Manifold Spacer fit for Ford Mustang 5.0L GT-40 explorer Cobra 1987-1993 year..
- 【Product Dimension】 THICKNESS 1" Made of High quality alloy..
- 【High Performance】Tektall Intake Manifold Spacer can reduce heat transfer from the engine to the intake manifold. The result is a colder IAT (don’t forget, colder air is more dense, which means more horsepower!). The end result is increased horsepower and allowed to increase time with fewer explosions..
- 【Package Includes】 1 X Intake Manifold Spacer, 2 X Gaskets, 1 X Mounting Hardware kit. Please confirm the item if it matches your machine before you purchase..
BATONECO Polished Airgap Intake Manifold High Rise Dual Plane Compatible with SBC Chevy 350 400
- 100% NEW - Made of high-quality aluminum material, Natural Intake Finish, Package Contents: Intake Manifold..
- COMPATIBILITY - Intake Manifold Compatible with Chevy Small Block SBC 350 400..
- ADVANTAGE - Basic Operating RPM Range: Idle-5500.
- FEATURE - intake manifolds are the perfect performance upgrades for your engine. These cast-aluminum manifolds are pressure-tested for leaks..
- DESIGN - The intake manifolds feature a high-flow runner design to deliver improved power from idle to 5500 rpm..
Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350
- 【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
- 【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
- 【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
- 【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
- 【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..
Universal Fuel Injector Cleaning Tool, Non-Dismantle Fuel Injector Cleaner Tester Petrol Cleaner Kit 600ML 140PSI
- 【Professional Cleaner Tool】 Improper cleaning of automobile fuel system will lead to TWC blockage and poisoning. fuel injector cleaner kit is a professional fuel injector cleaner, which can help you clean the whole fuel system quickly and simply, including TWC, intake manifold, throttle and exhaust pipe, etc..
- 【EFI-Electronic Fuel Injection System】 There two types of Electronic Fuel Injection System, throttle or electronic injection. one engine with fuel-return pipe, another one engine without fuel-return pipe.Throttle Model: The way of connection is the same as EFI System, just adjust the pressure of the air source 1-5PSI..
- 【Advantage of Non-Dismantle injector】 Can operate non-dismantle cleaning to Fuel System, it can operate cleaning air induction system, optional pipe clamp, fast and safe, multiple connectors match most European Union, Asian, American cars and light trucks..
- 【Multifunctional Fuel Injection Cleaner Tool】 The non-dismantle cleaner has a special handling one-way valves to seal up gas and durable pressure regulating valves. In addition, it also has anti-corrosion, anti-friction connector....