Top Intake manifold Reviews

Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350

【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..

Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

Brand New Holley Modular Lo-Ram EFI Manifold Kit, Top-Feed Plenum, Black Finish, Compatible with LS1, LS2 & LS 6 Gen III & IV Engines (Part #300-620BK).
The 300-620 top-feed plenum entry configuration is designed to allow the included Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 ....

Check Stock

ICT Billet LS3 Intake Manifold Seal Oring Gasket Set 6.2L LS L99 Rectangle Port Gen IV Compatible with Chevy Camaro (2010-2015) Corvette (2008-2013) Caprice SS G8 551278

Replace Your Leaking or Worn out Intake Manifold Gaskets with These new OE Spec Intake Manifold Gaskets.
Manufactured with High Quality Silicon to Ensure an Air Tight Seal.
Molded to Factory Dimensions for a Perfect fit.
Compatible with 2008 and up LS3 Rectangle Port Intake Manifolds.

Check Stock

BBC Holeshot Dual Plane Intake Manifold Oval Port, Plain

This Holeshot Manifold by Speedway Motors is the lowest profile intake design.
It is the perfect improvement over stock intake manifolds without worrying about hood clearance.
Manifolds are a dual-plane intake runner design and machined to accept spread port carburetors.
Has a idle-5500 rpm range and an oval port.
Features an aluminum construction with a natural finish.

Check Stock

E-Tuner 4

EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..

Check Stock

Dokili Aluminum Satin Intake Manifold for Small Block SBC 305 327 350 400 1957-1986

【Fitment】Dokili aluminum intake manifold for Small Block 1957-86 SBC Ch.e.v.y..
【Feature】Dokili intake manifold comes with dual-plane designs, providing power over a wide RPM range, from 1,500 to 6,500 RPM. The size of the port holes: 1.23" x 1.99". Bolt Hole Pattern: 5.160" x 5.625"..
【Dual plane】Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds..
【Note】This intake manifold Will not fit under Corvette hood. Professional installation in highly recommended..

Check Stock

Intake Manifold Runner Control Motor - Compatible with 2015-2018 Hyundai Sonata 2.4L 4-Cylinder

Compatible with or fits: 2015 - 2018 Hyundai Sonata 2.4L 4 Cyl.
Direct replacement - this replacement intake manifold runner motor matches the fit and function of the original equipment motor on specified vehicle....
Directly replaces the original motor ~ Made of quality materials and components for long-lasting, reliable service ~ Original Equipment Quality.
Package Contents: 1 Engine Intake Manifold Flap Motor.

Check Stock

Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable

【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit （Studs, nuts, and washers.） , 1 X Manual..
【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..

Check Stock

GY6 50CC 49CC Carburetor with Electric Choke for 4 Stroke Scooter Moped 139QMA 139QMB Taotao Engine PD18J Carb with Intake Manifold Air Filter kit

GY6 50cc Carburetor with 2-pin Male Electric Choke 18mm Intake Manifold.
GY6 50CC Carburetor comes with a #75 Main Jet. upgraded jets for better starting, idling and performance..
Size:Intake Manifold Side:18mm(Inner Diameter),28mm(Outer Diameter).
Air Filter Intake:35mm(inner diameter),39mm(Outer Diameter) ..
This is a 18mm Intake Carburetor,it fits most 4 stroke GY 49CC 50cc 80c 139QMA 139QMB Engine scooters carb, such as Taotao Baja, JMstar, Jonway,....
Package include: 1x Carburetor,1x Air Filter,1x Fuel Filter，1x Plug Spark,1x Intake Manifold，2 xGaskets..

Check Stock

DNA Motoring OEM-ITM-021 Factory Style Engine Upper Intake Manifold Replacement

Intake Gaskets Molded into the Intake Manifold.

Check Stock

Dokili Aluminum Intake Manifold Small Block Air Gap for SBC Vortec 350 1996-up

【Fitment】Dokili aluminum intake manifold is compatible with 96+ Vortec engines..
【Features】Dokili intake manifold comes with 180° high rise and dual-plane designs, providing excellent high RPM power, from 1,500 to 6,500 rpm. It features four corner water outlets, dual distributor hold down provisions, accepting late model water neck, A/C, alternator and HEI brackets..
【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds. Port size measures 2.06" x 1.18" and intake measures 4.65" tall..
【Dual Plane】The intake is square bore style and works with all 4150 Holley style carburetors. Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
【Air Gap】The air gap design allows air to flow under the plenum to prevent heat transfer from the engine resulting in more horsepower..

Check Stock

Engine Intake Manifold with Flow Control Valve Compatible with 2007-2017 Jeep patriot compass/2007-2011 Dodge Caliber Avenger Journey/2007-2009 Chrysler Sebring Replace # 4884495AK 911-902 4884495AH

➤ 【PREMIUM QUALITY BUT LOWER PRICE】 Our intake manifold is designed for high durability and resistance by our strict process standards. We offer original manufacturer quality at lower cost than getting replacement at dealer..
➤ 【IDEAL REPLACEMENT】 This intake manifold directly replaces the original. Perfect fit, easy installation, high reliability.(NOTE❗)This kind of intake manifold with baffle，can't fit for others without baffle. Please kindly check the 5th image as show on..
➤ 【MANUFACTURER PART NUMBERS】4884495AK 4884495AD, 4884495AE, 4884495AF, 4884495AG, 4884495AH, 4884495AI, 4884495AJ, 4884542AC.
➤ 【FITMENT】Compatible with 2007-2010 Jeep Patriot,Jeep Compass 2.0L 2.4L / 2011-2017 Jeep Patriot,Jeep Compass 2.4L / 2007-2009 Dodge Caliber 1.8L 2.0L 2.4L / 2010 Dodge Caliber 2.0L 2.4L / 2011 Dodge Caliber 2.4L / 2008-2009 Dodge Avenger 2.4L / 2009-2011 Dodge Journey 2.4L / 2007 -2009 Chrysler Sebring 2.4l.
After installing the Flow Control Valve valve, please wave the manifold baffle by hand to ensure that it can rotate smoothly, and then install the manifold on the car.

Check Stock

OE Style Engine Upper Intake Manifold Compatible with Ford Grand Marquis Muatang Lincoln Town Car 96-00

▶️ Intake Gaskets Molded into the Intake Manifold.
▶️ Direct Replacement for Factory Part.

Check Stock