Top 3 pin Fan Controller Reviews

ANNNWZZD Internal Mini SAS Cable,SFF8087 36 Pin to SFF8087 36Pin Data Cable,Mini-SAS to Mini-SAS Cable (3FT/1M)

【Kindly Reminder】Please note: this cable can ❌ Not work with SAS Driver. Internal Mini SAS 36pin SFF-8087 to (4) 29pin SFF-8482 connectors with SATA Power.
【Mini SAS to SAS Cable】Mini SAS 36 pin (SFF-8087) connect to the controller, 4 x SAS connect to the HDD (Hard Disc Driver).
【36 Pin to 29 Pin Cable】Mini SAS 36 pin is Host, 4 x SAS 29 pin is target, Internal mini Serial Attached SCSI x 4 (SFF-8087) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
【Controller to SATA Disks】Connecting a SAS controller (SFF-8087) to four SATA disks (SFF-8482).
【What You Get】1 x 3.3 FT CableCreation SFF-8087 to SFF-8482 Cable. Backed with 24 Months Warranty and lifetime technical service.

Check Stock

FFB1212EHE-F00 120 x 120 x 38mm Cooling Fan, 190 CFM, 4000 RPM, 59 dBA, 17.78 air pressure, 3 pin Tach connector, Combo Set of 3 Pieces, Ship from USA !!

Air Flow: 190 (Mini. 170.92) CFM or 5.38 (Mini. 4.84) Cubic Meter per minute.
Air Pressure: 17.78 (Mini. 14.30) mmH2O or 0.70 (Mini. 0.563) inchH2O.
Rated Input Voltage: 12VDC, Operating Input Voltage: 7 – 13.2VDC, Input Current: 2A (Max. 3A).
3-pin connector with speed (Tach) sensor – Caution: the 3-pin header must provide a minimum of 3A of power in order to power this fan so please check if your motherboard’s 3-pin header can provide enough power and if the header might overheat. We suggest using a fan controller with enough power, or purchase the same fan in the 4-pin molex + 3-pin connector version so you can power the fan directly from a power supply but without the ability to control the fan speed..

Check Stock

DEEPCOOL CF120 3IN1 Addressable RGB Motherboard SYNC by 5V ADD RGB 3-pin Header SYNC with Other ADD-RGB Devices Cable Controller Available 3x120mm PWM Fans

If your motherboard has ONE 5V 3-pin ADD-RGB header, you can use it to connect RGB extender cable to control and SYNC these three fans and one more....
If your motherboard does not have 5V 3-pin ADD-RGB header, you can use the included cable controller to connect the RGB extender cable to realize SYNC....
Fan speed can be intelligently controlled by motherboard in accordance with temperature.
Utilize 12pcs of independently programmable RGB LEDs for amazing display effects.
Fan Connector: 4Pin. LED Type: Addressable RGB LED. LED Connector: 3pin (+5V-D-G). LED Control: motherboard with 5V ADD-RGB Header. Cable controller....

Check Stock

Cooler Master MasterFan MF140 Halo Duo-Ring Addressable RGB Lighting 140mm Fan, Absorbing Rubber Pads, PWM Static Pressure for 5V 3-Pin ARGB,NOT Work with 4-pin RGB or RGB+12V (Single MF140 Halo)

...rmance Engineered: Hybrid Static Pressure blade design to tackle resistances in CPU liquid radiator, low-noise or mesh chassis ventilation while boosting overall airflow.
NOTE: (1)The Addressable RGB Light function MUST BE work with an Addressable RGB(+5V, 3-pin) capable motherboard or an Addressable RGB(+5V, 3-pin) controller( NOT included) .(2)It will NOT work with 4-pin RGB or Standard RGB+12V. (3)The ARGB connection header of this case fan is 4-position-3-pin, a 3-position-3-pin ARGB header adapter may need for some Gigabyte motherboard. Please check the ARGB motherboard of your motherboard before purchase!.
NOTE for Gigabyte Motherboard Owner: A Gigabyte Adapter Cable may be required to connect "MF140 Halo ARGB" to some models of Gigabyte RGB Fusion Addressable RGB capable motherboard with 3-position-3-pin ARGB Header. "Gigabyte Adapter Cable" or "Addressable RGB LED Small Controller" are SOLD SEPARATELY!.

Check Stock

Cooler Master ARGB LED Controller with 4 x 3-Pin Ports - Multiple Colour Effects, Thermal Detection Mode, 4-Pin RGB Device Compatible

VERSATILE SYSTEM HUB - Can connect to either 4-Pin RGB or 3-Pin ARGB compatible motherboards (ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light or ASRock Polychrome) or function as an independent controller instead..
SPECTACULAR LIGHTING EFFECTS - Features include interchangeable RGB/ARGB lighting control, multiple LED modes, as well as colour and speed adjustments..
BROAD COMPATIBILITY - The Cooler Master ARGB Controller includes a fan-signal wire, case-restart wire, motherboard restart wired, 4-Pin RGB connector, 4-Pin motherboard connector, USB header connector, USB adapter, ARGB 3-Pin motherboard connector, thermal detection wire, and 4 ARGB 3-pin connectors.
THERMAL DETECTION FUNCTION - When connected via the thermal detection cable, real-time temperatures can be monitored and displayed through colour lighting effects..
IN-FRAME MAGNETS - The slim case can be attached to any metallic surface..

Check Stock

Phanteks 140mm Case/Radiator Cooling Fan (PH-F140XP_BK)

...gular signals to your PC M/B indicating that the fan is working correctly..
Eight pre-installed rubber pads are now bigger and designed to reduce more vibration..
Phanteks PH-F140XP comes bundled with accessories. Includes a 400mm extension cable to improve cable management and 4 to 3 pin adapter for use with a fan controller..
Q.S.A adapter also included for settings from 300-900 rpm for a quieter set-up..
Helps minimize the vibration and easy to use..
Composed by MOSS and SSC systems, Phanteks’ UFB bearings have an effective hub-tip ratio to achieve a state of equilibrium reducing air and vibration noise..
PH-F140XP’s PWM functions allow users to adjust speed from 600 – 1200 RPM. Higher speed for performance and lower for silent operation..
Phanteks’ unique fan circuit design provides a Fan Polarity Auto-Restart feature. The sensor inside of the fan will constantly send a series of rectangular signals to your PC M/B indicating that the fan is working correctly..

Check Stock

DeepCool SC700 A-RGB Fan Hub, 12-Port 5V 3pin ARGB Fan HUB, Magnetic backplane Design, Suitable for 5V 3-Pin Aura Sync, Gigabyte RGB Fusion, msi Mystic Light sync, SATA Powered

【Addressable RGB SYNC CONTROL】Fit for Motherboard with 3-pin Addressable RGB header(+5V, DATA, N/A, GND) , Compatible with Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASROCK Polychrome Sync and SignalRGB software..
【Safe, efficient stable output】more concise and more efficient,Even with full loaded, it still can maintain stable output..
【Small body, large capacity】. Multi line management and control, keep the cables neat, support ARGB fan, ARGB light bar, etc., and synchronize the light efficiency of 5V 3pin interface equipment..
【ARGB hub 5V 3 pin fan controller pc】Only supports 5V 3pin ARGB fan Supports the installation of 12 groups of ARGB devices, supports ARGB fans, ARGB light strips, and other 3-pin 5V interface devices, lighting effect synchronization.
【Note】 the + 12V 4Pin RGB interface device is not supported! Do not insert!.

Check Stock

SinLoon 4 Knob Cooling Fan Speed Controller PC 8 Channels Fan Hub for CPU Case HDD VGA PWM Fan PCI Bracket 12V Fan Control- 4Pin Interface Power Supply 4 Pin 4Knob

【Function】PC 8 Channels Fan Hub Reduce speed to reduce noise & power consumption when computer parts are free. Increase speed to reduce computer....
【Knob Adjust】4 Knob Cooling Fan Speed Controller , This cooling fan hub is equipped with the independent speed controller..
【Material】4 Knob Cooling Fan Speed Controller adopts plastic and metal materials, durable, reliable, with low loss and low heat..
【Universal】Widely used for PC computer water cooling system, easy to install.Fan Interface: 4PIN (3PIN Can be connected).Power Supply Interface:....
【Save space】SinLoon PC 8 Channels Fan Hub The governor is installed in the PCI position of the chassis, which is convenient for installation and....

Check Stock

SinLoon 4 Knob Cooling Fan Speed Controller PC 8 Channels Fan Hub for CPU Case HDD VGA PWM Fan PCI Bracket 12V Fan Control- SATA Power Supply (SATA 4 Knob)

【Knob Adjust】4 Knob Cooling Fan Speed Controller , This cooling fan hub is equipped with the independent speed controller..
【Function】PC 8 Channels Fan Hub Reduce speed to reduce noise & power consumption when computer parts are free. Increase speed to reduce computer part temperature when computer parts are busy..
【Material】4 Knob Cooling Fan Speed Controller adopts plastic and metal materials, durable, reliable, with low loss and low heat..
【Universal】Widely used for PC computer water cooling system, easy to install.Fan Interface: 4PIN (3PIN Can be connected).Power Supply Interface: SATA..
【Save space】SinLoon PC 8 Channels Fan Hub The governor is installed in the PCI position of the chassis, which is convenient for installation and does not take up space..

Check Stock

Coolerguys Programmable Thermostat Fan Controller Kit for Standard 3pin Fans

PINPOINT CONTROL: Separately control up to four fans to stagger on at different intervals..
UNIVERSAL FAN OUTPUT: Use this controller to connect directly into standard 3pin fans (or use an adapter to get to a 3pin port)..
SIMPLE PLUG AND PLAY: Everything on this controller is plug and play with standard connectors for all the DIY people out there..
HIGH QUALITY: We trust in our products and extend 3 year warranties to this kit with components that have CE, UL, and ROHS safety listings..

Check Stock

Noctua NA-FC1 4-Pin PWM Fan Controller Black

Compact, highly flexible controller for 4-pin PWM fans.
Works as a manual speed reducer or in tandem with the automatic motherboard fan control: achieve truly quiet operation, even with high-speed PWM fans....
“No stop” mode: prevents the fan from falling below a speed of 300rpm in order to avoid BIOS fan errors.
Includes a 3-way splitter cable for controlling up to 3 fans simultaneously.

Check Stock

Lian Li UNI Fan SL120 5 Pack White - with Controller (ARGB 120mm LED PWM Daisy-Chain)

Unprecedented flexibility / A quicker and easier installation process.
Daisy-Chain Design : Slide-in / PIN-to-PIN interlocking mechanism.
L-CONNECT Software (Intuitive Control Interface).

Check Stock

EZDIY-FAB RGB Dual Ring 120mm Case Fans,5V Motherboard Sync,Speed Adjustable,RGB Sync Fan with 10-Port Fan Hub X and Remote-5 Pack

16 Leds with true RGB with 16.8 million colors to light up your build with nearly endless customizable combinations.
9-fan blade, support speed regulation, adjust brightness, intelligent color matching by wireless remote control..
8 shockproof pads ensure that the fan will not vibrate when it is running..
Sync RGB lighting via motherboard:- MUST BE work with an Addressable RGB(+5V, 3-pin) capable motherboard or an Addressable RGB(+5V, 3-pin) controller(Please check the ARGB motherboard of your motherboard before purchase!).
With EZDIY-FAB Fan Hub X and 21-key remote:You can instantly adjusting LED back-light effects, colors, brightness and Fan speed.

Check Stock