Top 2gig Spgc3 Reviews

Cameron Sino Battery For 2GIG 228844 Fits 2GIG Go Control panels Ni-MH 7.20V 2000mAh / 14.40Wh

  • Note---Please make sure selecting the right battery model in according with your original product..
  • Compatible Part Numbers: 2GIG 228844,6MR2000AAY4Z,BATT1,BATT2X.
  • Compatible model NO.: 2GIG Go Control panels.
  • All Products are Certificated with ISO9001, RoHS, and CE..
Check Stock

2GIG Technologies 2GIG-KEY2-345 Key Ring Remote, 4-Button

Check Stock

Ecolink WST-102 Honeywell Ademco and 2GIG receiver Compatible 4-Button Wireless Remote for home alarm

  • Compatible with Honeywell 5800 wireless and 2GIG Go Control.
Check Stock

Octastream Elite II Newest 2023 Model with Keyboard Remote and Extra Keypad Remote.(Comes with Easy Detailed Install Instructions, Great Customer Support)

  • Ships same day!!! Our shipping times are usually faster then Listed times 90% of the time..
  • Newest Octastream Model out. This replaces Models Q1pro, Q1elite Q1Max.
  • Comes with a backlit remote (full QWERTY keyboard).
  • Has the New Red Apps, Replaces the old Blue apps.
Check Stock

11J28-06881 - Upgraded Replacement for Beacon-Morris Direct Spark Ignition Control Board

  • The Honeywell Home PROTAKEOVER is a module add-on for the Honeywell Home PROA7PLUS Alarm Panel. By installing this module, your PROA7PLUS will be able to support one of several legacy RF sensor lineups. You can pick between Honeywell 5800, 2GIG 345 MHz, 433 MHz, 319.5 MHz, and Bosch Sensors..
  • Once the PROTAKEOVER Module has been installed, it will replace the existing back plate for the PROA7PLUS Panel. The PROTAKEOVER serves as the back plate, as it also provides an antenna for communicating with the legacy sensors..
Check Stock

Genuine Dell Motherboard Logic Board for Optiplex 170L GX170L Desktop DT Systems Intel 865GV Chipset DDR DIMM mPGA478B Socket Compatible Part Numbers: C7018

  • Chipset: Intel 865GV / Supported Processor: Intel Pentium 4 processor with a 400 / 533 / 800 MHz system bus / Intel Celeron D processor with a 400 / 533 MHz system bus / mPGA478B Socket (478).
  • Supported Memory: Two 184-Pin DDR DIMM Sockets (up to 2Gig Max Total)/ Supports DDR 400/333/266 NON Ecc Memory Sticks.
  • Audio: Integrated on board stereo sound - Line In/Line Out/Mic In/.
  • Peripheral Interfaces: 4x Back-panel USB 2.0 ports and 2x Front-panel USB Ports/ 1x Floppy diskette drive interface / 1x serial port/ 1x parallel port / 1x Integrated 10/100 network port/ 2x ATA IDE interfaces with UDMA 33, ATA-66/100 support / 1x SATA Port / 2x PS/2 Ports.
  • Expansion Capability: 1 PCI Slot on-board Motherboard Part Number:C7018.
Check Stock

Minoston Z-Wave Plug Dimmer Smart Plug-in Outlet Built-in Repeater Range Extender Z-Wave Hub Required Alexa and Google Assistant Compatible 200W MP21ZD

  • This Z-Wave dimmer plug is compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device....
  • 1-100% Dimming and Voice Control: Z-Wave Dimmer plug customizes lighting output and creates the perfect ambiance for any room. Adjust the light....
  • Timer schedule: Control lights to come on or turn off via a schedule at certain times of the day to reduce your electricity bill, set up custom scenes....
  • Wireless control: A large range of types of dimmable light bulbs are supported to be wirelessly controlled like lamps or dimmable LED lights from....
  • Easy to Setup: No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient smart outlet features..
Check Stock

Minoston Z-Wave Plug 700 Plug-in Outlet Built-in Repeater Range Extender, Z-Wave Hub Required, Alexa and Google Assistant Compatible(MP31Z)

  • This Z-Wave plug is compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS!Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • Z-Wave plug in outlet is 15A Max Loading for using with most of home lighting devices and home appliances..
  • Timer schedule: Control lights to come on or turn off via a schedule at certain times of the day to reduce your electricity bill, set up custom scenes with other devices enrich intelligent life..
  • Z-Wave 700 series chip for Smart Start and for most of Z-Wave hubs..
  • Easy to Setup: No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient smart outlet features..
Check Stock

Zooz 700 Series Z-Wave Plus Open|Close XS Sensor ZSE41 for Door, Window, and Gate Monitoring. Hub Required (Sold Separately). Compatible with SmartThings, Hubitat, and Ring Alarm.

  • FAST AND RELIABLE: Get notified on your Z-Wave hub’s app or via text when a door or window is opened for easy DIY security monitoring. Use on safety gates, cabinet doors, patio doors, and more. Z-Wave hub required, sold separately (check below for compatibility)..
  • EXTRA SMALL: Perfect for discreet mounting with a slim profile to fit most frames and surfaces..
  • OUTDOOR CASE AVAILABLE: The sensor is coated with protective rubber oil against corrosion and water leak damage. A splash is fine but if you want to install it outdoors, you’ll need a dedicated waterproof case (sold separately, ask Zooz about it)..
  • Z-WAVE COMPATIBILITY: Supported by open Z-Wave systems only, including Home Assistant, HomeSeer, Hubitat, Vera, and Ezlo hubs. Compatible with SmartThings and Ring Alarm (no access to advanced settings). NOT supported by alarm panels like Vivint, Qolsys, 2GIG, ADT, or others..
  • SMART SECURITY: 700 series Z-Wave chip with longer range, better battery life, and the highest level of S2 security with SmartStart for fully encrypted communication. Covered by a 5-year limited warranty and backed by lifetime tech support 7 days a week..
Check Stock

Zooz 700 Series Z-Wave Plus Water Leak XS Sensor ZSE42 for for Smart Flood Prevention. Hub Required (Sold Separately). Compatible with SmartThings, Hubitat, and Ring Alarm.

  • ... Z-WAVE COMPATIBILITY: Supported by open Z-Wave systems only, including Home Assistant, HomeSeer, Hubitat, and Ezlo hubs (NOT supported by older Vera hubs). Compatible with SmartThings and Ring Alarm (no access to advanced settings). NOT supported by alarm panels like Vivint, Qolsys, 2GIG, ADT, or others..
  • SMART SECURITY: Equipped with the highest level of S2 security with SmartStart for fully encrypted communication. Covered by a 5-year limited warranty and backed by lifetime tech support 7 days a week..
Check Stock

Minoston Z-Wave Outdoor Dimmer Plug, Outdoor Smart Outlet Switch, Z-Wave Hub Required, Weatherproof, Built-in Repeater, Work with SmartThings, Wink, Alexa, Black(MP22ZD)

  • This Z-Wave outdoor dimmer plug compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS!Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • 0-100% Dimming and Voice Control: This Z-Wave outdoor dimmer for string lights can adjust the light brightness from 0-100% by voice commands. Just say:“Hey Alexa, set the led strip lights to 75%”..
  • Ideal for Outdoor: IP65 weatherproof housing. Ideal for Garden, Backyard, Kitchen, Bathroom, Porch, Balcony, Garage, Basement, Patio or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances..
  • Schedule and Timer: You can set automatic daily timers or create on/off routing so that the Z-Wave plug can turn on and off automatically. And saving energy when the plugged-in appliances are not needed or are left on by accident..
  • 400W Max Power Z-Wave Dimmer Plug: The Z-Wave plug-in smart dimmer plug works with dimmable string lights in LED, INC bulb. Please make sure your string lights are dimmable and the total power is less than 400W. 150W Max for....
Check Stock

Minoston Z-Wave Plus Smart Plug, Outdoor On/Off Outlet Switch, ZWave Hub Required, Weather-Resistant, Built-in Repeater, Work with SmartThings, Wink, Alexa, Black(MP22Z)

  • This Z-Wave outdoor plug is compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS!Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • Ideal for Outdoor: IP65 Weather-resistant housing. Ideal for Garden, Backyard, Kitchen, Bathroom, Porch, Balcony, Garage, Basement, Patio or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances, etc--should not be exposed directly to rain or immersed in water..
  • Schedule and Timer: You can set automatic daily timers or create on/off routing so that your devices can turn on and off automatically. And saving energy when the plugged-in appliances are not needed or are left on by accident..
  • Work with: MP22Z outdoor smart plug designed for use for or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances, etc..
  • How to set up: Pair it with your hub and plug in the device you want to remote control. Now you can use your cellphone to turn the device ....
Check Stock

ENERWAVE ZWN-RSM2-PLUS-NEW Z-Wave Plus Dual Module, Hidden Smart Switch, Single Pole, 120-277VAC, 10A Per Relay, Neutral Wire Required, ZWN-RSM2-PLUS, Black (New Version), White

  • Enerwave Z-Wave Plus Dual Relay is the most advanced and customizable module you can add to your existing appliances and lights. Module can be installed in wall boxes behind switches and outlets or in ceiling boxes behind ceiling fans or chandeliers. Hidden relay allows you to use original switches and decorative wall plates.
  • Remotely turn your appliances (lights, fans) on and off from an internet-connected smartphone, tablet, or computer. Program Z-Wave relay switch in scenes, groups, and associations. Dynamic scheduling and control from anywhere. Z-Wave hub required.
  • Z-Wave Plus, featuring 67% improvement in range, 250% more bandwidth, Over The Air (OTA) firmware updates. Backwards compatible with existing Z-Wave devices.
  • 120-277VAC, 10A maximum load per relay. Not compatible with security panels such as Honeywell Panel, NORTEK (2GIG) Security & Control Panel. ETL-listed, FCC compliant. Dimensions: length 2.03” x width 1.72” depth 0.62”.
  • Get into IoT with the best home automation device. Connect your Z-Wave hub to Alexa or Google Assistant for full voice control. Compatibility with Alexa, Google Assistant, or IFTTT is dependent on the Z-Wave hub that is installed.
Check Stock