Top 24mm Nozzle Reviews

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).

Check Stock

MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle

100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..

Check Stock

WINSINN 40mm RGB Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans LED Colorful 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of Pcs)

✔️WINSINN 40mm RGB fan which micro size and lightweight design, fast and stable cooling, colorful when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 24V, which perfectly compatible a various 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
✔️Rated Voltage: DC 24V, Current: 0.05A, Power: 1.2W, Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA.
✔️WINSINN 40mm RGB fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
✔️Packing List: 4 x 40mm RGB Fan 24v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.

Check Stock

Anytec 10Pcs Metal Cleaning Brush Set for Weed Pipe Clean Glass Hookah Smoking Brush Baby Feeding Bottle Brush

The brush head is nylon bristles. The well-made nylon bristles prevent scratching the items, and is also not easy to pluck.
Various sizes to meet all kinds of pipeline cleaning requirements: one set included 10 diameters. 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 12mm, 16mm 20mm, 24mm.
PREFECT FOR CLEAN THE DIFFICULT PARTS OF APPLIANCES. Such like coffee pot nozzle and teapot nozzle, nipple baby bottle tube, oil pourer, drinks....
Not too hard and not too soft, efficient cleaning will not damage your equipment, just like your toothbrush protect your teeth.
Package: 1 set of 10 brushes with varying diameters on a detachable key ring.

Check Stock

Qtqgoitem Round Nozzle 1/2BSP Thread Flexible Oil Coolant Pipe Tube 60cm Long (Model: 4c0 87c 395 c03 724)

Nozzle Size : 40 x 10mm/ 1.6" x 0.4"(L*Tip Dia).
Overall Size : 60 x 2.6cm/ 23.6" x 1"(L*D).
Package Content : 1 x Flexible Coolant Pipe.

Check Stock

KUWAN 30pcs Brass Misting Nozzles for Cooling System 0.023\ (0.6 mm) 10/24 UNC Garden (0.023)

Brass / SS 0.023 inches (0.6 mm) orifice, screw Into any 10/24-threaded mist nozzle opening.
High Quality: made of brass, never rust. the bras nozzle is the best choice for outdoor use with cold water.
Operation Pressure: 20-70kg/cm, flow Rate: 80-145ml/min.
Minimal water use of 1/2 gallon of water per hour per mist nozzle.
Leak-proof, self-sealing o-ring included with each brass nozzle.

Check Stock

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
Suitable For Creality ender 3/ender 3 Pro.

Check Stock

Pressure Washer Extension Wand, Aihand 24FT Telescoping Power Washer Wand with Gutter & Brush Cleaner Attachment, 7 Spray Nozzle Tips, 2 Hose Inlet Adapters & Belt Harness, 4000 PSI

...le belt support harness. This helps you have better control of the pressure washer gutter cleaner and reduces the strain on your neck, arms and back. No need to climb ladders, it makes your cleaning job safer and more efficient, allowing you to clean in comfort.
【7 Spray Nozzle Tips】Aihand offers 7 different spray angles to make it easy to reach hard-to-reach areas. Nozzle kit includes 4 high pressure stainless steel quick connect nozzles (0°red nozzle, 15° yellow nozzle, 25°green nozzle, 40°white nozzle), one low pressure nozzle (65°black soap nozzle) and 2 jet stream tips (Blue tip for rinse mode, Pink tip for soap mode). They meet your cleaning needs in a variety of situations such as roofs, cars, fences, walls, windows, etc.

Check Stock

Baomain ZU05S 6mm Vacuum Ejector Push in One Touch Tube Type Pneumatic Fitting

Type: Push in Tube Type(Without Exhaust).

Check Stock

High Pressure 3/16\ Threaded Outdoor Anti-drip Fogging Spray Head Misting System Nozzle, Orifice 0.3mm 10-Pack

High Quality Material: The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water.
Wide Usage: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, outdoor cooling system, agriculture irrigation system, etc..
Dimension: Thread size is UNC 10-24, Orifice diameter is 0.4mm.
Easy to Install: The brass misting nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening.
Leak-proof, self-sealing o-ring included with each brass nozzle.

Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..

Check Stock

50PCS Brass Misting Nozzles for Outdoor Cooling System 0.012' Orifice (0.3 mm) 10/24 UNC

Operation Pressure:4-70kg/cm (60-995 psi) flow rate:80-145l/min (21-38gpm)..
Save Water: Minimal water use of 1/2 gallon of water per hour per nozzle, which fits for low pressure mister system..
Package Quantity: 50Pack. The orifice of these mister nozzles is 0.012 inch/0.3 mm. Screw into any 10/24-threaded mist nozzle opening..
High Quality & Leak Proof: These misting nozzles made of brass, never rust. Best choice for outdoor use with cold water. Each nozzle is equipped with a leak proof O-ring, so no tape or sealant is required..
Wide Application: The brass misting nozzle is widely applied to outdoor cooling system, agriculture irrigation system, green house, landscaping, small fountain, etc..

Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

Nozzle Cleaning Kit: you will get 32 MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....

Check Stock