Top 215mm Nozzle Reviews

Red PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament

PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..

Check Stock

Ice White PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament

PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
Dimensions: 1kg (2.2lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool has an ID=2-3/8″, OD=8″, and is 2.5″ wide.
Recommended Settings: Nozzle Temperature 195 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..

Check Stock

Neon Green PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament…

PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..

Check Stock

Midnight Black PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament

PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..

Check Stock

Honey Gold PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament

PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..

Check Stock

Pearly Silver PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament

PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..

Check Stock

Metallic Gray PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament

PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..

Check Stock

PLA 3D Printer Filament 1.75mm SUNLU PLA Filament Dimensional Accuracy +/- 0.02 mm 1 kg Spool PLA 1.75 Black

【1KG(2.2 lbs) Spool】Spool Diameter: 8.00"-Spool Width: 2.50"-Spool Hub Hole Diameter: 2.20". SUNLU Strong Coils Design Help Your 3D Printing More....
【1.75mm PLA Filament】SUNLU PLA 3D Printer Filament 1.75mm, PLA 1.75 Dimensional Accuracy +/- 0.02mm. No Pungent Smell in Printing, No Harm to User....
【Tangle Less & Clog-free & Bubble-Free】Full Mechanical Winding and Strict Manual Examination, Which Guarantee the SUNLU PLA filaments tidy and....
【High Compatibility】SUNLU PLA Filament Works Perfectly with Most FDM 3D Printers on the Market, Such as Ender 3, CR 6, A 8, CR 10, Maker Bot, Mono....
【Recommend Settings】PLA Filament Extrusion/Nozzle Temperature 215-230℃, Bed 70℃-80℃. SUNLU 3D Filament are the Most Common Used Filaments....

Check Stock

Swimming Pool Cover Pump 850 GPH Submersible Sump Pumps Above Ground with 3 Adapters Drainage Hose 25 ft Power Cord (Blue)

...ltering function faster than the ordinary pump..
Safty&Versatile: Built-in temperature control chip, connected or disconnected with temperature changes,don’t worry about burning the pump, safety in use. Extra length 25ft Power Cord, for large area use.
16ft drainage hose, suitable for the 1/2 ” water nozzle, can drain from any depth of the pool.3/4″ water nozzle and 3/4” crooked water nozzle is suitable for drainage hoses and garden hoses..
Customer help: The pump comes with a user technical manual. We guarantee it for one year. Contains all of the packages. We provide 100% satisfactory customer service with 24 hours/7 days..

Check Stock

3D Printer PLA Filament 1.75, JAYO Grey PLA Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, 1KG Spool, PLA Grey

【1.75MM Diameter ±0.02mm, Smoothly Printing】 JAYO PLA filament made of premium PLA raw material, advanced CCD diameter measuring and self-adaptive control system in the manufacturing process, dimensional accuracy is 1.75mm+/- 0.02mm, easy to print without clogging. Spool is 1KG spool(2.2lbs)..
【Strong Adhesion, Low Odor】 JAYO PLA filament produce in strictly procedures, no bubbles, ultra smooth technology, low odor, provide you a pleasure printing experience..
【100% Vacuum Packaging】 Good vacuum packing ensures the filament are dry and in good toughness, not easy to break..
【Compatible with 99% FDM 3D Printer】 JAYO PLA filament 1.75mm works perfectly on 99% FDM 3D printers, because most DIY printers use 1.75mm in size. Recommended printing temp/nozzle temperature: 215-230℃, base plate temperature: 70°C..
【12 Months Warranty & Friendly After-Sales Service】 N.W 1KG PLA, welcome guide, 12 months warranty, and friendly after-sales service. Let’s buy it now!.

Check Stock

TTYT3D 18 Popular Shiny Silk Colors PLA 3D Printer Filament Refill Sample Pack，3D Pen Filament，Each Color 4m Length Total 72m Filament

Great Silk PLA Sample Pack for 3D Printer: Include 18 Different Most Popular Silk Shiny Colors, Each Color 4 Meters Length, Perfectly For Silk PLA....
Premium Quality, Universal compatible with most 1.75mm 3D Pens/3D Printers on market, 1.75mm High Diameter Tolerance, No Edge Warping, Consistent....
Printing Tips: Suggest Use 0.5mm New 3D Printer Nozzle,Recommend Heat Bed 50-60°C, Recommend Printing Temperature: 215°C, To Avoid being Tangled,....
Package: Total 18 Different Beautiful Shiny Silk PLA Pack Together.
100% Satisfy Warranty: Within 24 Hours Reply,100% Satisfaction Guarantee, If You're not Completely Satisfied for Any Reason, Contact us and We'll Help....

Check Stock

Dark Forest Green PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament

PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..

Check Stock

Neon Yellow PLA American Filament, 1.75 mm Diameter, 1 kg Spool, Made in The USA! 3D Printer Filament, Highlighter Yellow

PLA Plastic (Polylactic Acid): the most commonly used 3D printer material due to its ease of use, affordability, and favorable mechanical properties. AF filament is produced using corn-based resin from American farms..
Dimensions: 1kg (2.2 lbs) of Filament Per Spool with a Diameter of 1.75mm (Dimensional Accuracy +/- 0.05mm), Spool dimensions are: ID=2.05″, OD=8″, and W=2.875″ wide.
Recommended Settings: Nozzle Temperature 205 – 215 °C, Bed Temperature 50-70 °C, and PEI or Buildtek beds are recommended for best printing results..
Packaging: All AF spools are vacuum sealed with a desiccant packet to protect plastic filament from moisture..

Check Stock