Top 200mm Nozzle Reviews

ERYONE Sparkly Glitter Shining PLA Filament for 3D Printer, 1.75mm, Tolerance: ±0.03mm, 1kg(2.2LBS)/Spool, Black

Gypsophila sparkling PLA 3D filament material with shiny bright surface and little laminated striation..
Print Temperature Range & Diameter: 190－220℃. 1.75mm (tolerance ±0.03mm). We recommend hardened steel nozzle 0.5mm. Brass, and other softer alloy nozzle, may wear out..
No bubble or dust inside, lower clog or tangling rate..
Sealed vacuum bag to keep it dry and keep out dust..
spool inner diameter 57mm, spool outer diameter 200mm, height 64mm..

Check Stock

Weldpro Spool Gun 15' for Weldpro MIG200GDsv 200 amp MIG welder and MIG155GD removable torch welder

The Weldpro Spool gun comes complete with a 2 LB Spool of .030 inch aluminum wire. Designed with backend connector to fit our MIG200GDsv 200 amp MIG welder and also our new version MIG155GD removable torch welder..
American SB8, with 0.9 contact nozzle on the gun, 13mm2 cable, 3m gun length, 16M-4A iron-sealed four-core, 12V SB8 wire feeder, 0.9-feeder wheel, with SB8 wheel-type welding gun American-neutral instruction manual, with 0.8/0.9 contact nozzle each, install SB8 white box, put SB8 outer carton..

Check Stock

PRILINE 1kg Wood PLA Filament 1.75 3D Printer Filament( The Layer Should be Thicker Than 0.2mm and The Nozzle Should be Bigger Than 0.4mm)

Priline wood filament has wood powder in it.
Size: 1.75mm (Tolerance Level : ± 0.03mm) - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20".
Recommended Printing Temp/Nozzle Temperature: 200-230°C (392-446°F), Base Plate Temperature: 0-50°C(32-122°F).
No more durable nozzle need.But wood filament requires a .6 or larger nozzle to avoid clogging.
Refund Guarantee in 30 Days: We trust our products. If you aren't happy with our 3D printer filament, tell us and We will arrange a refund for you.

Check Stock

Gizmo Dorks Glitter PLA 3D Printer Filament 1.75mm 200g, Gray

Glitter PLA nozzle temperature range 195 - 225 C.
Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp.
200 gram net weight is the perfect sample size to try out filament.
Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming.
Spool dimensions are 6 inches by 1.5 inches with a 2.25 inch spindle diameter.
the net weight of the filament is 200 grams.

Check Stock

FLASHFORGE 3D Printer Adventurer 4 Lite, Auto Leveling Glass Build Plate, Removable Nozzle One-Click Replacement, 4.3" Touchscreen, 1KG PLA Filament, Enclosed Chamber 220 x 200 x 250 mm

【Removable Nozzle & Support Various Filament】--- Snap-in design nozzle, replaced in 3 seconds, tool-free easier for replacement and maintenance. 240/265℃ nozzle can support various filament like ABS/PC/PLA/PLA-CF/PETG/PETG-CF. (Must buy 0.6mm/265℃ for PETG additionally.).
【Real Auto-Level & Excellent First-Layer Printing】--- You can play it without leveling after unpacking.
Applying CNC processed mounting base, 9-points compensation via software to ensure the flatness of the platform, dual Y-axis guide rail to make platform runs more steady, ensuring the more excellent first-layer of printing..
【Multi-Device Printing】--- With new software FlashPrint, you can control multiple printers online on your computer/mobile phone..
【1Kg Filament & Large Print Volume】--- Built-in 1KG filament spool holder, no need external bracket anymore. The large print volume 200x200x250mm can meet most of your needs..
【Glass Build Plate】--- With strong adhesion and uniform heating, it can be heated to 110℃ to meet the printing requirements of various filaments. I....

Check Stock

Geeetech PLA 3D Printer Filament, 1kg Spool (2.2lbs), 1.75mm Dimensional Accuracy +/- 0.03mm, Silver

✔️【Dimensional Accuracy & Consistency】– GEETECH PLA has strict tolerances. Diameter 1.75mm, dimensional accuracy +/- 0.03mm without any exaggeration. It works and harmonizes perfectly with all common 1.75mm FDM 3D printers..
✔️【1kg (2.2lbs) Spool】–Pack of 1 1kg/(2.2lbs) Silver Color pla. Spool size: Φ200mm/7.9" flange, Φ56mm/2.2" hub hole, 64mm/2.5" width. Reel is suitable for most trendy printers, Comgrow, Geeetech, Longer, LABISTS, ANYCUBIC.etc.
✔️【Easy-to-Use, Clog-Free, Bubble-Free】– Recommended extrusion/nozzle temperature 185°C - 215°C (365°F - 419°F), hot bed 25°C - 60°C (77℉~ 140℉) . Works perfectly with all common 1.75mm FDM 3D printers..
✔️【Vacuum Packing】– Vacuum sealed with desiccant to maintain low level of moisture content. And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.Note: an extra sealed bag is offered to store filament..
✔️【100% Satisfaction Warranty】GEEETECH provides 100% Satisfaction Guarantee. If you are not satisfied with this filament, please kindly contact us at ANY TIME..

Check Stock

CloroxPro Turbo Pro Electrostatic Sprayer, Healthcare and Industrial Spray, Clorox Disinfectant Spray - 29561

Cordless hand sprayer, with shoulder strap. Powered by dependable rechargeable Panasonic Lithium battery (UL listed). Additional batteries available as well, for quick swaps during the day. Wall charger included..
The VF-ES200holds 1/2 gallons of solution or approximately 2.2 Liters. Fog Nozzle size: 0.5 mm. Fogging Nozzle: 50 micron (5,600 sq.ft per gallon). Adjustable Spray Nozzle size: 100 to 500 micron..
Set of Replacement Accessories are provided with each unit, to ensure no down time in case an issue arises. No waiting on parts to get back up and running!.
1 year warranty against manufacturing defects. Replacement parts available and in stock..
Electrostatic application device for Clorox Total 360, KlorKleen, Vital Oxide, hypochlorous acid and other disinfecting solutions..

Check Stock

YESWELDER Mig Welding Gun Torch Stinger 15ft (4.5m) 250 Amp Replacement for Miller M-25 169598 fit Millermatic 212 & 252

Premium quality 250Amp replacement MIG gun stinger torch, 15-foot (4.5m) cable.
This gun is a direct replacement for the GA-20C, GA-21C, and M-25 169598 welding guns..
Use standard Miller front consumables uses the same 169 726 gas nozzle, the same 169 728 tip adapter, the same 169 729 nozzle adapter, and the same contact tips as the OEM Miller gun .030-.035(0.8-0.9MM) diameter welding wire.
This 15 ft long gun will handle.030-.045(0.8-1.2mm) diameter welding wire,It comes standard with a .035"(0.9mm) diameter tip in the welding gun,and one more .035 and .045 tips in the package.
It fits all of the following models: Millermatic 200, 210, 212, 250, 250X, 251, 252, and Vintage.

Check Stock

Gizmo Dorks Low Odor ABS 3D Printer Filament 1.75mm 200g Sample Pack - Black, Sky Blue, Orange, Red

Uniquely formulated to be virtually smell free while 3D printing.
Low odor ABS prints are high in strength and durability while providing for maximum impact resistance..
200 gram net weight is the perfect sample size to try out filament.
Spool dimensions are 6 inches by 1.5 inches with a 2.25 inch spindle diameter.
the net weight of the filament is 200 grams.

Check Stock

WeldingCity MIG Welding Gun Accessory Kit .035 Contact Tip-Gas Nozzle-Gas Diffuser-Nozzle Adapter for Lincoln Magnum 200/250 and Tweco #2 180-250 Amp

Premium MIG welding gun accessory kit includes consumable parts of contact tips, gas nozzles, nozzle adapter and gas diffusers for use with Lincoln,....
Work with 180-250 Amp MIG welding gun such as Lincoln Magnum 200/250 series, Tweco #2 and other equivalent MIG guns..
Content in each accessory kit: Tweco style consumables.
2-pcs slip-on gas nozzles 22-50 (1/2"), 2-pcs gas diffusers 52, 2-pcs nozzle adapter 32 and....
For welding wire size: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Please refer to all listed pictures for part compatibility..
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock

Gizmo Dorks PLA Filament for 3D Printers 1.75mm 200g, 4 Color Pack - Blue, Green, Orange, Red

PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant.
Recommended Nozzle Temperature: 205 - 225 C.
Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
PLA filament is compatible with various 3D printers such as the Creality Ender 3, Anycubic, Prusa, Flashforge, Monoprice, and many more.
Perfect compliment to sample colors for your 3D printer or 3D pen. Each spool contains 200g and included colors are Blue, Green, Orange, and Red.

Check Stock

Gizmo Dorks Low Odor ABS 3D Printer Filament 3mm (2.85mm) 200g Sample Pack - White, Teal, Purple, Grey

Uniquely formulated to be virtually smell free while 3D printing.
Low odor ABS prints are high in strength and durability while providing for maximum impact resistance..
200 gram net weight is the perfect sample size to try out filament.
Spool dimensions are 6 inches by 1.5 inches with a 2.25 inch spindle diameter.
the net weight of the filament is 200 grams.

Check Stock

Gizmo Dorks Low Odor ABS 3D Printer Filament 1.75mm 1kg, Black

Uniquely formulated to be virtually smell free while 3D printing.
Low odor ABS prints are high in strength and durability while providing for maximum impact resistance..
200 gram net weight is the perfect sample size to try out filament.
Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter.
the net weight of the filament is 1 kg which is 2.2 pounds.

Check Stock