Top 200 Psi Gate Valve Reviews

Valterra 7201 ABS Gate Valve, Black, 2\ Slip

APPLICATIONS: Ideal for quick opening and shut off in low vacuum or pressure applications - Can be used with air or clean/gray/waste water.
KEY FEATURES: Unrestricted flow - Full port opening - Simple push/pull operation.
SPECIFICATIONS: Maximum Pressure - 20 psi Open/40 psi Closed, Schedule 40 ABS Slip fittings.
REPAIRS: Bolted assembly allows for replacement of valve body and gate seals - Handle simply unscrews.

Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI.
Includes the essential components to install an onboard air system: 480C Air compressor, pressure switch, 2.5 gallon air tank, relay, air tank....
200 PSI maximum working pressure, 1.76 CFM at 0 PSI.
Can inflate a 37 Inch Tire from 0-30PSI in 7 minutes and 10 seconds..
One Year Manufacturer's defect warranty through manufacturer with receipt. Air tank should be used with a drain cock and pressure release valve..

Air Compressor Pressure Control Switch 4 Ports 95-125 PSI w/ 0-200 Pressure Gauge and 150 PSI Pop off valve.
Brand new Air Compressor Control Valve (95-125 PSI Pressure Switch). It is comparable to a Furnas, Square D, and many more..
he product has an On/Off switch and a unloader. It will be working on both 2 stage and single stage compressors. If your compressor does not need the unloader, you do not have to hook it up..
PRESET 95-125 PSI ¼" COMPRESSION UNLOADER VALVE ¼" FEMALE NPT TANK CONNECTION WITH 3 EXTRA 1/4" PORTS. MAX AMPS, 20 AMPS AT 120VOLT / 12 AMP AT 240 VOLT , AND 9.6 AMP AT 3PH 240 VOLT.

Scuba Refill Adapter with a 8mm quick disconnect..
Built for standard Scuba K-Valve, J-Valve and H-Valve..
Fill station compatible with standard 200bar / 300bar, 3000psi / 4500psi air tanks..
Made of high quality aluminium alloy, which is anti-rust and durable with gauge..
Filling compressed air or nitrogen to your small air tanks / paintball tanks from a larger cylinder.

✅DESIGN- The valve features a stainless steel to prevent water from traveling back to the source to avoid contamination..
✅QUALITY- Made of from heavy-duty brass for extra durability and strength during every use..
✅FUNCTIONALITY- The working pressure of the check valve is 200 PSI with a minimum of 5 PSI to open the spring..
✅MEASUREMENT- The in-line check valve is equipped with a 1 inch female iron pipe (FIP) threaded connection for a maintenance free operation..
✅SAFETY- The EZ-FLO in-line check valve is compliant with the Safe Drinking Water Act..

Schieffer 1/4" x 200' 4800 PSI Thermoplastic Sewer Jetter Hose.
7250 PSI High Pressure Ball Valve 3/8" Female Connectors.
Erie Tools Button Nose and Rotating 1/4" Sewer Jetter Drain Cleaning Nozzle 4.5 Orifice.
Erie Tools 5000 PSI 3/8" x 200' Portable Hose Reel.
Raptor Blast Brass Hex Bushing 3/8" x 1/4" Reducer.

3/4" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
3/4" Threaded IPS Lead Free Brass Water Cut off Ball Valve.
Size: 3/4" IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
IAPMO Listed to cUPC - "Lead-Free" Compliant.

Thanks to the elbow and adapter with pre-applied thread sealant, this valve kit works on air compressors with 1/4 or 3/8 inch NPT drain valve..
The 10” braided steel hose is flexible which prevents breaking and kinks..
Featured a quarter turn drain valve, it makes draining water out of the compressor tank much easier and you don’t have to do that on your knees anymore..
Installation is simply enough and once the old peacock is removed, it will be threaded in with little difficulty..
Fittings are made of heavy duty brass which is corrosion resistant. Working Pressure: 175 PSI, Blasting Pressure: 475 PSI & Max Temperature: 200 ℉.

PEX elbow connections for easy installation without adaptors, reducing leak points.
Valve can be easily rotated 180° to accommodate supply lines from floor or ceiling.
Flush plug allows valve body to be tested and flushed without the presence of the valve cartridge (ships with trim).
Can be tested using flush plug with air (200 psi) or water (300 psi).
Stainless steel retaining ring with flats secures flush plug and cartridge, eliminating the need for screws.

This valve is used to prevent the back flow of fluids.
Maximum pressure rating 200 psi，200 WOG (water, Oil, gas).
This valve has a brass body with a stainless steel spring for long-lasting durability.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Scuba Refill Adapter with 36" quick disconnect filling whip hose..
Built for standard Scuba K-Valve, J-Valve and H-Valve..
Fill station compatible with standard 200bar / 300bar, 3000psi / 4500psi air tanks..
Made of high quality aluminium alloy, which is anti-rust and durable..
Filling compressed air or nitrogen to your small air tanks / paintball tanks from a larger cylinder..